| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6634211a-7ecc-378e-bc78-82c80e24d579@kernel.org>
Date: Tue, 7 Jan 2020 16:03:55 -0700
From: shuah <shuah@...nel.org>
To: Alan Maguire <alan.maguire@...cle.com>, brendanhiggins@...gle.com,
linux-kselftest@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, kunit-dev@...glegroups.com,
keescook@...omium.org, yzaikin@...gle.com,
akpm@...ux-foundation.org, yamada.masahiro@...ionext.com,
catalin.marinas@....com, joe.lawrence@...hat.com,
penguin-kernel@...ove.sakura.ne.jp, urezki@...il.com,
andriy.shevchenko@...ux.intel.com, corbet@....net,
davidgow@...gle.com, adilger.kernel@...ger.ca, tytso@....edu,
mcgrof@...nel.org, linux-doc@...r.kernel.org,
Knut Omang <knut.omang@...cle.com>, shuah <shuah@...nel.org>
Subject: Re: [RESEND PATCH v7 linux-kselftest-test 3/6] kunit: allow kunit
tests to be loaded as a module
Hi Alan,
Thanks for the resend.
On 1/6/20 3:28 PM, Alan Maguire wrote:
> As tests are added to kunit, it will become less feasible to execute
> all built tests together. By supporting modular tests we provide
> a simple way to do selective execution on a running system; specifying
>
> CONFIG_KUNIT=y
> CONFIG_KUNIT_EXAMPLE_TEST=m
>
> ...means we can simply "insmod example-test.ko" to run the tests.
>
> To achieve this we need to do the following:
>
> o export the required symbols in kunit
> o string-stream tests utilize non-exported symbols so for now we skip
> building them when CONFIG_KUNIT_TEST=m.
> o drivers/base/power/qos-test.c contains a few unexported interface
> references, namely freq_qos_read_value() and freq_constraints_init().
> Both of these could be potentially defined as static inline functions
> in include/linux/pm_qos.h, but for now we simply avoid supporting
> module build for that test suite.
> o support a new way of declaring test suites. Because a module cannot
> do multiple late_initcall()s, we provide a kunit_test_suites() macro
> to declare multiple suites within the same module at once.
> o some test module names would have been too general ("test-test"
> and "example-test" for kunit tests, "inode-test" for ext4 tests);
> rename these as appropriate ("kunit-test", "kunit-example-test"
> and "ext4-inode-test" respectively).
>
> Also define kunit_test_suite() via kunit_test_suites()
> as callers in other trees may need the old definition.
>
> Co-developed-by: Knut Omang <knut.omang@...cle.com>
> Signed-off-by: Knut Omang <knut.omang@...cle.com>
> Signed-off-by: Alan Maguire <alan.maguire@...cle.com>
> Reviewed-by: Brendan Higgins <brendanhiggins@...gle.com>
> Acked-by: Theodore Ts'o <tytso@....edu> # for ext4 bits
> Acked-by: David Gow <davidgow@...gle.com> # For list-test
> Reported-by: kbuild test robot <lkp@...el.com>
> ---
> drivers/base/power/qos-test.c | 2 +-
> fs/ext4/Kconfig | 2 +-
> fs/ext4/Makefile | 3 +-
> fs/ext4/inode-test.c | 4 ++-
> include/kunit/test.h | 37 ++++++++++++++++------
> kernel/sysctl-test.c | 4 ++-
> lib/Kconfig.debug | 4 +--
> lib/kunit/Kconfig | 4 +--
> lib/kunit/Makefile | 10 ++++--
> lib/kunit/assert.c | 8 +++++
> lib/kunit/{example-test.c => kunit-example-test.c} | 4 ++-
> lib/kunit/{test-test.c => kunit-test.c} | 5 +--
> lib/kunit/string-stream-test.c | 2 +-
> lib/kunit/test.c | 8 +++++
> lib/kunit/try-catch.c | 2 ++
> lib/list-test.c | 4 ++-
> 16 files changed, 76 insertions(+), 27 deletions(-)
> rename lib/kunit/{example-test.c => kunit-example-test.c} (97%)
> rename lib/kunit/{test-test.c => kunit-test.c} (98%)
>
> diff --git a/drivers/base/power/qos-test.c b/drivers/base/power/qos-test.c
> index 3115db0..79fc6c4 100644
> --- a/drivers/base/power/qos-test.c
> +++ b/drivers/base/power/qos-test.c
> @@ -114,4 +114,4 @@ static void freq_qos_test_readd(struct kunit *test)
> .name = "qos-kunit-test",
> .test_cases = pm_qos_test_cases,
> };
> -kunit_test_suite(pm_qos_test_module);
> +kunit_test_suites(&pm_qos_test_module);
> diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
> index ef42ab0..435510f 100644
> --- a/fs/ext4/Kconfig
> +++ b/fs/ext4/Kconfig
> @@ -108,7 +108,7 @@ config EXT4_DEBUG
> echo 1 > /sys/module/ext4/parameters/mballoc_debug
>
> config EXT4_KUNIT_TESTS
> - bool "KUnit tests for ext4"
> + tristate "KUnit tests for ext4"
> select EXT4_FS
> depends on KUNIT
> help
> diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
> index 840b91d..4ccb3c9 100644
> --- a/fs/ext4/Makefile
> +++ b/fs/ext4/Makefile
> @@ -13,5 +13,6 @@ ext4-y := balloc.o bitmap.o block_validity.o dir.o ext4_jbd2.o extents.o \
>
> ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o
> ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o
> -ext4-$(CONFIG_EXT4_KUNIT_TESTS) += inode-test.o
> +ext4-inode-test-objs += inode-test.o
> +obj-$(CONFIG_EXT4_KUNIT_TESTS) += ext4-inode-test.o
> ext4-$(CONFIG_FS_VERITY) += verity.o
> diff --git a/fs/ext4/inode-test.c b/fs/ext4/inode-test.c
> index 92a9da1..95620bf 100644
> --- a/fs/ext4/inode-test.c
> +++ b/fs/ext4/inode-test.c
> @@ -269,4 +269,6 @@ static void inode_test_xtimestamp_decoding(struct kunit *test)
> .test_cases = ext4_inode_test_cases,
> };
>
> -kunit_test_suite(ext4_inode_test_suite);
> +kunit_test_suites(&ext4_inode_test_suite);
> +
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/kunit/test.h b/include/kunit/test.h
> index dba4830..2dfb550 100644
> --- a/include/kunit/test.h
> +++ b/include/kunit/test.h
> @@ -12,6 +12,7 @@
> #include <kunit/assert.h>
> #include <kunit/try-catch.h>
> #include <linux/kernel.h>
> +#include <linux/module.h>
> #include <linux/slab.h>
> #include <linux/types.h>
>
> @@ -197,31 +198,47 @@ struct kunit {
> int kunit_run_tests(struct kunit_suite *suite);
>
> /**
> - * kunit_test_suite() - used to register a &struct kunit_suite with KUnit.
> + * kunit_test_suites() - used to register one or more &struct kunit_suite
> + * with KUnit.
> *
> - * @suite: a statically allocated &struct kunit_suite.
> + * @suites: a statically allocated list of &struct kunit_suite.
> *
> - * Registers @suite with the test framework. See &struct kunit_suite for
> + * Registers @suites with the test framework. See &struct kunit_suite for
> * more information.
> *
> - * NOTE: Currently KUnit tests are all run as late_initcalls; this means
> + * When builtin, KUnit tests are all run as late_initcalls; this means
> * that they cannot test anything where tests must run at a different init
> * phase. One significant restriction resulting from this is that KUnit
> * cannot reliably test anything that is initialize in the late_init phase;
> * another is that KUnit is useless to test things that need to be run in
> * an earlier init phase.
> *
> + * An alternative is to build the tests as a module. Because modules
> + * do not support multiple late_initcall()s, we need to initialize an
> + * array of suites for a module.
> + *
> * TODO(brendanhiggins@...gle.com): Don't run all KUnit tests as
> * late_initcalls. I have some future work planned to dispatch all KUnit
> * tests from the same place, and at the very least to do so after
> * everything else is definitely initialized.
> */
> -#define kunit_test_suite(suite) \
> - static int kunit_suite_init##suite(void) \
> - { \
> - return kunit_run_tests(&suite); \
> - } \
> - late_initcall(kunit_suite_init##suite)
> +#define kunit_test_suites(...) \
> + static struct kunit_suite *suites[] = { __VA_ARGS__, NULL}; \
> + static int kunit_test_suites_init(void) \
> + { \
> + unsigned int i; \
> + for (i = 0; suites[i] != NULL; i++) \
> + kunit_run_tests(suites[i]); \
> + return 0; \
> + } \
> + late_initcall(kunit_test_suites_init); \
> + static void __exit kunit_test_suites_exit(void) \
> + { \
> + return; \
> + } \
> + module_exit(kunit_test_suites_exit)
> +
> +#define kunit_test_suite(suite) kunit_test_suites(&suite)
This macro is getting more and more complex. Is there a good reason
for this code to stay as a macro?
thanks,
-- Shuah
Powered by blists - more mailing lists