[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <b4220470-8ed4-d819-846c-3ea44c37eac3@gmail.com>
Date: Wed, 8 Jan 2020 02:14:10 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Peter De Schrijver <pdeschrijver@...dia.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Michał Mirosław <mirq-linux@...e.qmqm.pl>
Cc: linux-pm@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v9 00/17] Consolidate and improve NVIDIA Tegra CPUIDLE
driver(s)
19.12.2019 00:04, Dmitry Osipenko пишет:
> Hello,
>
> This series does the following:
>
> 1. Unifies Tegra20/30/114 drivers into a single driver and moves it out
> into common drivers/cpuidle/ directory.
>
> 2. Preapres code for CPU cluster power-down idling state enabling on
> Tegra30.
>
> In the end there is a quite nice clean up of the Tegra CPUIDLE drivers
> and of the Tegra's arch code in general. Please review, thanks!
>
> WARNING!!! This series in made on top of CPUFreq patches [1]. The CPUFreq
> patches should be applied first, otherwise there will be a minor merge
> conflict in 'arch/arm/mach-tegra/tegra.c' because CPUFreq patches add a
> new simple-platform device for Tegra30 [2].
>
> [1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=149451
> [2] https://patchwork.ozlabs.org/patch/1212772/
>
> Changelog:
>
> v9: - Rebased on recent linux-next. Dropped the v8 "Avoid NULL dereference.."
> patch as a result, it's not needed anymore.
>
> - Temporarily dropped "cpuidle: tegra: Support CPU cluster power-down
> state on Tegra30" patch because Michał Mirosław reported that it causes
> problem for ASUS TF300T Tegra30 device, we'll have to resolve the
> problem first.
>
> - Added ACKs from Peter De Schrijver to the patches.
>
> v8: - Rebased on recent linux-next, now making use of
> cpuidle_driver_state_disabled(). Added new patch to make this new API
> usable by the updated Tegra cpuidle driver:
>
> cpuidle: Avoid NULL dereference in cpuidle_driver_state_disabled()
>
> - Added new patch to handle case where LP2 isn't available:
>
> cpuidle: tegra: Disable CC6 state if LP2 unavailable
>
> v7: - drivers/cpuidle/cpuidle-tegra.c now includes an explicit comment that
> clarifies the new terminology that is used for naming of the idling
> states. This change was suggested by Peter De Schrijver in the review
> comment to v6. See the comment to struct tegra_idle_driver in the code.
>
> - (!) This series is now based on top of the "NVIDIA Tegra20 CPUFreq
> driver major update" patchset. The conflict between these two series
> is trivial to resolve, but still it's worth to mention about that.
>
> v6: - Addressed request from Thierry Reding to change the way patches are
> organized by making changes in a more incremental manner.
>
> - tegra_sleep_cpu() now checks for the secondary CPUs to be offline
> in the "Make outer_disable() open-coded" patch.
>
> v5: - Rebased on a recent linux-next, fixed one minor conflict in Kconfig.
>
> - Improved commit's message of the "Support CPU cluster power-down state
> on Tegra30" patch.
>
> - The "Support CPU cluster power-down state on Tegra30" patch is also
> got split and now there is additional "Make outer_disable() open-coded"
> patch.
>
> - Made minor cosmetic changes to the "Introduce unified driver for
> NVIDIA Tegra SoCs" patch by improving error message and renaming
> one variable.
>
> v4: - Fixed compilation with !CONFIG_CACHE_L2X0 (and tested that it still
> works).
>
> - Replaced ktime_compare() with ktime_before() in the new driver,
> for consistency.
>
> v3: - Addressed review comments that were made by Jon Hunter to v2 by
> splitting patches into smaller (and simpler) chunks, better
> documenting changes in the commit messages and using proper error
> codes in the code.
>
> Warnings are replaced with a useful error messages in the code of
> "Introduce unified driver for NVIDIA Tegra SoCs" patch.
>
> Secondary CPUs parking timeout increased to 100ms because I found
> that it actually may happen to take more than 1ms if CPU is running
> on a *very* low frequency.
>
> Added diagnostic messages that are reporting Flow Controller state
> when CPU parking fails.
>
> Further polished cpuidle driver's code.
>
> The coupled state entering is now aborted if there is a pending SGI
> (Software Generated Interrupt) because it will be lost after GIC's
> power-cycling. Like it was done by the old Tegra20 CPUIDLE driver.
>
> v2: - Added patches to enable the new cpuidle driver in the defconfigs:
>
> ARM: multi_v7_defconfig: Enable Tegra cpuidle driver
> ARM: tegra: Enable Tegra cpuidle driver in tegra_defconfig
>
> - Dropped patches that removed CPUIDLE_FLAG_TIMER_STOP from the idling
> states because that flag actually doesn't have any negative effects,
> but still is correct for the case of a local CPU timer on older Tegra
> SoCs:
>
> cpuidle: tegra: Remove CPUIDLE_FLAG_TIMER_STOP from Tegra114/124 idle-state
> cpuidle: tegra: Remove CPUIDLE_FLAG_TIMER_STOP from all states
>
> - The "Add unified driver for NVIDIA Tegra SoCs" patch got more polish.
> Tegra30 and Terga114 states are now squashed into a single common C7
> state (following Parker TRM terminology, see 17.2.2.2 Power Management
> States), more comments added, etc minor changes.
>
> Dmitry Osipenko (17):
> ARM: tegra: Compile sleep-tegra20/30.S unconditionally
> ARM: tegra: Add tegra_pm_park_secondary_cpu()
> ARM: tegra: Remove pen-locking from cpuidle-tegra20
> ARM: tegra: Change tegra_set_cpu_in_lp2() type to void
> ARM: tegra: Propagate error from tegra_idle_lp2_last()
> ARM: tegra: Expose PM functions required for new cpuidle driver
> ARM: tegra: Rename some of the newly exposed PM functions
> ARM: tegra: Make outer_disable() open-coded
> arm: tegra20: cpuidle: Handle case where secondary CPU hangs on
> entering LP2
> arm: tegra20: cpuidle: Make abort_flag atomic
> arm: tegra20/30: cpuidle: Remove unnecessary memory barrier
> cpuidle: Refactor and move out NVIDIA Tegra20 driver into
> drivers/cpuidle
> cpuidle: tegra: Squash Tegra30 driver into the common driver
> cpuidle: tegra: Squash Tegra114 driver into the common driver
> cpuidle: tegra: Disable CC6 state if LP2 unavailable
> ARM: multi_v7_defconfig: Enable Tegra cpuidle driver
> ARM: tegra: Enable Tegra cpuidle driver in tegra_defconfig
>
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm/configs/tegra_defconfig | 1 +
> arch/arm/mach-tegra/Makefile | 19 +-
> arch/arm/mach-tegra/cpuidle-tegra114.c | 89 ----
> arch/arm/mach-tegra/cpuidle-tegra20.c | 212 ----------
> arch/arm/mach-tegra/cpuidle-tegra30.c | 132 ------
> arch/arm/mach-tegra/cpuidle.c | 50 ---
> arch/arm/mach-tegra/cpuidle.h | 21 -
> arch/arm/mach-tegra/irq.c | 3 +-
> arch/arm/mach-tegra/pm.c | 54 ++-
> arch/arm/mach-tegra/pm.h | 4 -
> arch/arm/mach-tegra/reset-handler.S | 11 -
> arch/arm/mach-tegra/reset.h | 9 +-
> arch/arm/mach-tegra/sleep-tegra20.S | 170 --------
> arch/arm/mach-tegra/sleep-tegra30.S | 6 +-
> arch/arm/mach-tegra/sleep.h | 15 -
> arch/arm/mach-tegra/tegra.c | 7 +-
> drivers/cpuidle/Kconfig.arm | 8 +
> drivers/cpuidle/Makefile | 1 +
> drivers/cpuidle/cpuidle-tegra.c | 389 ++++++++++++++++++
> include/soc/tegra/cpuidle.h | 2 +-
> .../mach-tegra => include/soc/tegra}/irq.h | 8 +-
> include/soc/tegra/pm.h | 31 ++
> 23 files changed, 482 insertions(+), 761 deletions(-)
> delete mode 100644 arch/arm/mach-tegra/cpuidle-tegra114.c
> delete mode 100644 arch/arm/mach-tegra/cpuidle-tegra20.c
> delete mode 100644 arch/arm/mach-tegra/cpuidle-tegra30.c
> delete mode 100644 arch/arm/mach-tegra/cpuidle.c
> delete mode 100644 arch/arm/mach-tegra/cpuidle.h
> create mode 100644 drivers/cpuidle/cpuidle-tegra.c
> rename {arch/arm/mach-tegra => include/soc/tegra}/irq.h (59%)
>
Hello Rafael and Daniel,
Could you please take a look at the CPUIDLE driver patches and ACK them
if they are okay to you? Then Thierry will be able to take this series
via Tegra tree. Thanks in advance!
Powered by blists - more mailing lists