lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ca162efb3a0de530e119f5237c006515@kernel.org>
Date:   Tue, 07 Jan 2020 09:29:29 +0000
From:   Marc Zyngier <maz@...nel.org>
To:     Jianyong Wu <jianyong.wu@....com>
Cc:     netdev@...r.kernel.org, yangbo.lu@....com, john.stultz@...aro.org,
        tglx@...utronix.de, pbonzini@...hat.com,
        sean.j.christopherson@...el.com, richardcochran@...il.com,
        Mark.Rutland@....com, will@...nel.org, suzuki.poulose@....com,
        steven.price@....com, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, kvmarm@...ts.cs.columbia.edu,
        kvm@...r.kernel.org, Steve.Capper@....com, Kaly.Xin@....com,
        justin.he@....com, nd@....com
Subject: Re: [RFC PATCH v9 7/8] ptp: arm64: Enable ptp_kvm for arm64

On 2019-12-10 03:40, Jianyong Wu wrote:
> Currently in arm64 virtualization environment, there is no mechanism to
> keep time sync between guest and host. Time in guest will drift 
> compared
> with host after boot up as they may both use third party time sources
> to correct their time respectively. The time deviation will be in order
> of milliseconds but some scenarios ask for higher time precision, like
> in cloud envirenment, we want all the VMs running in the host aquire 
> the
> same level accuracy from host clock.
> 
> Use of kvm ptp clock, which choose the host clock source clock as a
> reference clock to sync time clock between guest and host has been 
> adopted
> by x86 which makes the time sync order from milliseconds to 
> nanoseconds.
> 
> This patch enable kvm ptp on arm64 and we get the similar clock drift 
> as
> found with x86 with kvm ptp.
> 
> Test result comparison between with kvm ptp and without it in arm64 are
> as follows. This test derived from the result of command 'chronyc
> sources'. we should take more cure of the last sample column which 
> shows
> the offset between the local clock and the source at the last 
> measurement.
> 
> no kvm ptp in guest:
> MS Name/IP address   Stratum Poll Reach LastRx Last sample
> ========================================================================
> ^* dns1.synet.edu.cn      2   6   377    13  +1040us[+1581us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377    21  +1040us[+1581us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377    29  +1040us[+1581us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377    37  +1040us[+1581us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377    45  +1040us[+1581us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377    53  +1040us[+1581us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377    61  +1040us[+1581us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377     4   -130us[ +796us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377    12   -130us[ +796us] +/-   
> 21ms
> ^* dns1.synet.edu.cn      2   6   377    20   -130us[ +796us] +/-   
> 21ms
> 
> in host:
> MS Name/IP address   Stratum Poll Reach LastRx Last sample
> ========================================================================
> ^* 120.25.115.20          2   7   377    72   -470us[ -603us] +/-   
> 18ms
> ^* 120.25.115.20          2   7   377    92   -470us[ -603us] +/-   
> 18ms
> ^* 120.25.115.20          2   7   377   112   -470us[ -603us] +/-   
> 18ms
> ^* 120.25.115.20          2   7   377     2   +872ns[-6808ns] +/-   
> 17ms
> ^* 120.25.115.20          2   7   377    22   +872ns[-6808ns] +/-   
> 17ms
> ^* 120.25.115.20          2   7   377    43   +872ns[-6808ns] +/-   
> 17ms
> ^* 120.25.115.20          2   7   377    63   +872ns[-6808ns] +/-   
> 17ms
> ^* 120.25.115.20          2   7   377    83   +872ns[-6808ns] +/-   
> 17ms
> ^* 120.25.115.20          2   7   377   103   +872ns[-6808ns] +/-   
> 17ms
> ^* 120.25.115.20          2   7   377   123   +872ns[-6808ns] +/-   
> 17ms
> 
> The dns1.synet.edu.cn is the network reference clock for guest and
> 120.25.115.20 is the network reference clock for host. we can't get the
> clock error between guest and host directly, but a roughly estimated 
> value
> will be in order of hundreds of us to ms.
> 
> with kvm ptp in guest:
> chrony has been disabled in host to remove the disturb by network 
> clock.
> 
> MS Name/IP address         Stratum Poll Reach LastRx Last sample
> ========================================================================
> * PHC0                    0   3   377     8     -7ns[   +1ns] +/-    
> 3ns
> * PHC0                    0   3   377     8     +1ns[  +16ns] +/-    
> 3ns
> * PHC0                    0   3   377     6     -4ns[   -0ns] +/-    
> 6ns
> * PHC0                    0   3   377     6     -8ns[  -12ns] +/-    
> 5ns
> * PHC0                    0   3   377     5     +2ns[   +4ns] +/-    
> 4ns
> * PHC0                    0   3   377    13     +2ns[   +4ns] +/-    
> 4ns
> * PHC0                    0   3   377    12     -4ns[   -6ns] +/-    
> 4ns
> * PHC0                    0   3   377    11     -8ns[  -11ns] +/-    
> 6ns
> * PHC0                    0   3   377    10    -14ns[  -20ns] +/-    
> 4ns
> * PHC0                    0   3   377     8     +4ns[   +5ns] +/-    
> 4ns
> 
> The PHC0 is the ptp clock which choose the host clock as its source
> clock. So we can be sure to say that the clock error between host and 
> guest
> is in order of ns.
> 
> Signed-off-by: Jianyong Wu <jianyong.wu@....com>
> ---
>  drivers/clocksource/arm_arch_timer.c | 22 ++++++++++++
>  drivers/ptp/Kconfig                  |  2 +-
>  drivers/ptp/ptp_kvm_arm64.c          | 53 ++++++++++++++++++++++++++++
>  3 files changed, 76 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/ptp/ptp_kvm_arm64.c
> 
> diff --git a/drivers/clocksource/arm_arch_timer.c
> b/drivers/clocksource/arm_arch_timer.c
> index 277846decd33..72260b66f02e 100644
> --- a/drivers/clocksource/arm_arch_timer.c
> +++ b/drivers/clocksource/arm_arch_timer.c
> @@ -1636,3 +1636,25 @@ static int __init arch_timer_acpi_init(struct
> acpi_table_header *table)
>  }
>  TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
>  #endif
> +
> +#if IS_ENABLED(CONFIG_PTP_1588_CLOCK_KVM)
> +#include <linux/arm-smccc.h>
> +int kvm_arch_ptp_get_crosststamp(unsigned long *cycle, struct 
> timespec64 *ts,
> +			      struct clocksource **cs)
> +{
> +	struct arm_smccc_res hvc_res;
> +	ktime_t ktime_overall;
> +
> +	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID, &hvc_res);
> +	if ((long)(hvc_res.a0) < 0)
> +		return -EOPNOTSUPP;
> +
> +	ktime_overall = hvc_res.a0 << 32 | hvc_res.a1;
> +	*ts = ktime_to_timespec64(ktime_overall);
> +	*cycle = hvc_res.a2 << 32 | hvc_res.a3;

So why isn't that just a read of the virtual counter, given that what 
you do
in the hypervisor seems to be "cntpct - cntvoff"?

What am I missing here?

> +	*cs = &clocksource_counter;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(kvm_arch_ptp_get_crosststamp);
> +#endif
> diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
> index 9b8fee5178e8..3c31ff8eb05f 100644
> --- a/drivers/ptp/Kconfig
> +++ b/drivers/ptp/Kconfig
> @@ -110,7 +110,7 @@ config PTP_1588_CLOCK_PCH
>  config PTP_1588_CLOCK_KVM
>  	tristate "KVM virtual PTP clock"
>  	depends on PTP_1588_CLOCK
> -	depends on KVM_GUEST && X86
> +	depends on KVM_GUEST && X86 || ARM64 && ARM_ARCH_TIMER
>  	default y
>  	help
>  	  This driver adds support for using kvm infrastructure as a PTP
> diff --git a/drivers/ptp/ptp_kvm_arm64.c b/drivers/ptp/ptp_kvm_arm64.c
> new file mode 100644
> index 000000000000..f3f957117865
> --- /dev/null
> +++ b/drivers/ptp/ptp_kvm_arm64.c
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + *  Virtual PTP 1588 clock for use with KVM guests
> + *  Copyright (C) 2019 ARM Ltd.
> + *  All Rights Reserved
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/err.h>
> +#include <asm/hypervisor.h>
> +#include <linux/module.h>
> +#include <linux/psci.h>
> +#include <linux/arm-smccc.h>
> +#include <linux/timecounter.h>
> +#include <linux/sched/clock.h>
> +#include <asm/arch_timer.h>
> +
> +int kvm_arch_ptp_init(void)
> +{
> +	struct arm_smccc_res hvc_res;
> +
> +	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
> +			     &hvc_res);
> +	if ((long)(hvc_res.a0) < 0)
> +		return -EOPNOTSUPP;
> +
> +	return 0;
> +}
> +
> +int kvm_arch_ptp_get_clock_generic(struct timespec64 *ts,
> +				   struct arm_smccc_res *hvc_res)
> +{
> +	ktime_t ktime_overall;
> +
> +	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
> +				  hvc_res);
> +	if ((long)(hvc_res->a0) < 0)
> +		return -EOPNOTSUPP;
> +
> +	ktime_overall = hvc_res->a0 << 32 | hvc_res->a1;
> +	*ts = ktime_to_timespec64(ktime_overall);
> +
> +	return 0;
> +}
> +
> +int kvm_arch_ptp_get_clock(struct timespec64 *ts)
> +{
> +	struct arm_smccc_res hvc_res;
> +
> +	kvm_arch_ptp_get_clock_generic(ts, &hvc_res);
> +
> +	return 0;
> +}

I also wonder why this is all arm64 specific, while everything
should also work just fine on 32bit.

         M.
-- 
Jazz is not dead. It just smells funny...

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ