| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CADBw62rK1a9K7cxf5ti7YkFsJJ5tJ+8yjuF2aYR3PnZnoK-r2g@mail.gmail.com>
Date: Wed, 8 Jan 2020 17:29:51 +0800
From: Baolin Wang <baolin.wang7@...il.com>
To: Faiz Abbas <faiz_abbas@...com>
Cc: linux-omap@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
devicetree@...r.kernel.org, linux-mmc <linux-mmc@...r.kernel.org>,
kishon@...com, Adrian Hunter <adrian.hunter@...el.com>,
mark.rutland@....com, robh+dt@...nel.org,
Ulf Hansson <ulf.hansson@...aro.org>, tony@...mide.com
Subject: Re: [PATCH v4 03/11] mmc: sdhci: add support for using external DMA devices
Hi Faiz,
On Wed, Jan 8, 2020 at 5:19 PM Faiz Abbas <faiz_abbas@...com> wrote:
>
> Hi Baolin,
>
> On 08/01/20 6:58 am, Baolin Wang wrote:
> > Hi Faiz,
> >
> > On Mon, Jan 6, 2020 at 7:01 PM Faiz Abbas <faiz_abbas@...com> wrote:
> >>
> >> From: Chunyan Zhang <zhang.chunyan@...aro.org>
> >>
> >> Some standard SD host controllers can support both external dma
> >> controllers as well as ADMA/SDMA in which the SD host controller
> >> acts as DMA master. TI's omap controller is the case as an example.
> >>
> >> Currently the generic SDHCI code supports ADMA/SDMA integrated in
> >> the host controller but does not have any support for external DMA
> >> controllers implemented using dmaengine, meaning that custom code is
> >> needed for any systems that use an external DMA controller with SDHCI.
> >>
> >> Fixes by Faiz Abbas <faiz_abbas@...com>:
> >> 1. Map scatterlists before dmaengine_prep_slave_sg()
> >> 2. Use dma_async() functions inside of the send_command() path and call
> >> terminate_sync() in non-atomic context in case of an error.
> >>
> >> Signed-off-by: Chunyan Zhang <zhang.chunyan@...aro.org>
> >> Signed-off-by: Faiz Abbas <faiz_abbas@...com>
> >> ---
> >> drivers/mmc/host/Kconfig | 3 +
> >> drivers/mmc/host/sdhci.c | 228 ++++++++++++++++++++++++++++++++++++++-
> >> drivers/mmc/host/sdhci.h | 8 ++
> >> 3 files changed, 237 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> >> index d06b2dfe3c95..adef971582a1 100644
> >> --- a/drivers/mmc/host/Kconfig
> >> +++ b/drivers/mmc/host/Kconfig
> >> @@ -1040,3 +1040,6 @@ config MMC_OWL
> >> help
> >> This selects support for the SD/MMC Host Controller on
> >> Actions Semi Owl SoCs.
> >> +
> >> +config MMC_SDHCI_EXTERNAL_DMA
> >> + bool
> >> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> >> index f6999054abcf..8cc78c76bc3d 100644
> >> --- a/drivers/mmc/host/sdhci.c
> >> +++ b/drivers/mmc/host/sdhci.c
> >> @@ -10,6 +10,7 @@
> >> */
> >>
> >> #include <linux/delay.h>
> >> +#include <linux/dmaengine.h>
> >> #include <linux/ktime.h>
> >> #include <linux/highmem.h>
> >> #include <linux/io.h>
> >> @@ -1157,6 +1158,188 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> >> sdhci_set_block_info(host, data);
> >> }
> >>
> >> +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
> >> +
> >> +static int sdhci_external_dma_init(struct sdhci_host *host)
> >> +{
> >> + int ret = 0;
> >> + struct mmc_host *mmc = host->mmc;
> >> +
> >> + host->tx_chan = dma_request_chan(mmc->parent, "tx");
> >> + if (IS_ERR(host->tx_chan)) {
> >> + ret = PTR_ERR(host->tx_chan);
> >> + if (ret != -EPROBE_DEFER)
> >> + pr_warn("Failed to request TX DMA channel.\n");
> >> + host->tx_chan = NULL;
> >> + return ret;
> >> + }
> >> +
> >> + host->rx_chan = dma_request_chan(mmc->parent, "rx");
> >> + if (IS_ERR(host->rx_chan)) {
> >> + if (host->tx_chan) {
> >> + dma_release_channel(host->tx_chan);
> >> + host->tx_chan = NULL;
> >> + }
> >> +
> >> + ret = PTR_ERR(host->rx_chan);
> >> + if (ret != -EPROBE_DEFER)
> >> + pr_warn("Failed to request RX DMA channel.\n");
> >> + host->rx_chan = NULL;
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
> >> + struct mmc_data *data)
> >> +{
> >> + return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
> >> +}
> >> +
> >> +static int sdhci_external_dma_setup(struct sdhci_host *host,
> >> + struct mmc_command *cmd)
> >> +{
> >> + int ret, i;
> >> + struct dma_async_tx_descriptor *desc;
> >> + struct mmc_data *data = cmd->data;
> >> + struct dma_chan *chan;
> >> + struct dma_slave_config cfg;
> >> + dma_cookie_t cookie;
> >> + int sg_cnt;
> >> +
> >> + if (!host->mapbase)
> >> + return -EINVAL;
> >> +
> >> + cfg.src_addr = host->mapbase + SDHCI_BUFFER;
> >> + cfg.dst_addr = host->mapbase + SDHCI_BUFFER;
> >> + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> >> + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> >> + cfg.src_maxburst = data->blksz / 4;
> >> + cfg.dst_maxburst = data->blksz / 4;
> >> +
> >> + /* Sanity check: all the SG entries must be aligned by block size. */
> >> + for (i = 0; i < data->sg_len; i++) {
> >> + if ((data->sg + i)->length % data->blksz)
> >> + return -EINVAL;
> >> + }
> >> +
> >> + chan = sdhci_external_dma_channel(host, data);
> >> +
> >> + ret = dmaengine_slave_config(chan, &cfg);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED);
> >> + if (sg_cnt <= 0)
> >> + return -EINVAL;
> >> +
> >> + desc = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len,
> >> + mmc_get_dma_dir(data),
> >> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> >> + if (!desc)
> >> + return -EINVAL;
> >> +
> >> + desc->callback = NULL;
> >> + desc->callback_param = NULL;
> >> +
> >> + cookie = dmaengine_submit(desc);
> >> + if (cookie < 0)
> >
> > We usually use the DMA engine standard API: dma_submit_error() to
> > validate the cookie.
> >
>
> The if condition is doing the same thing as the API. Do we really
> require it?
Yes, now it did the same thing. But in future if the DMA engine expand
the cookie indication, which may break your current condition, but use
dma_submit_error() is more safe, that will help to cover the internal
cookie things. So I recommend to use the standard API as far as
possible.
But if Ulf does not care about this, it's Okay for me too :)
Powered by blists - more mailing lists