lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CANdKZ0e+OtVsHps0GPKd7+1DQ=jdavcg4K7vRoW_tOTKD2Smug@mail.gmail.com>
Date:   Wed, 8 Jan 2020 19:12:41 +0800
From:   Pi-Hsun Shih <pihsun@...omium.org>
To:     Roger Lu <roger.lu@...iatek.com>
Cc:     Kevin Hilman <khilman@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Nicolas Boichat <drinkcat@...gle.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Fan Chen <fan.chen@...iatek.com>,
        HenryC Chen <HenryC.Chen@...iatek.com>,
        YT Lee <yt.lee@...iatek.com>,
        Xiaoqing Liu <Xiaoqing.Liu@...iatek.com>,
        Charles Yang <Charles.Yang@...iatek.com>,
        Angus Lin <Angus.Lin@...iatek.com>,
        Mark Rutland <mark.rutland@....com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Nishanth Menon <nm@...com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-arm-kernel@...ts.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        open list <linux-kernel@...r.kernel.org>,
        "open list:THERMAL" <linux-pm@...r.kernel.org>
Subject: Re: [PATCH v6 3/3] PM / AVS: SVS: Introduce SVS engine

Hi Roger,

On Tue, Jan 7, 2020 at 3:02 PM Roger Lu <roger.lu@...iatek.com> wrote:
>
> The SVS (Smart Voltage Scaling) engine is a piece
> of hardware which is used to calculate optimized
> voltage values of several power domains,
> e.g. CPU/GPU/CCI, according to chip process corner,
> temperatures, and other factors. Then DVFS driver
> could apply those optimized voltage values to reduce
> power consumption.
>
> Signed-off-by: Roger Lu <roger.lu@...iatek.com>
> ---
>  drivers/power/avs/Kconfig     |   10 +
>  drivers/power/avs/Makefile    |    1 +
>  drivers/power/avs/mtk_svs.c   | 2075 +++++++++++++++++++++++++++++++++
>  include/linux/power/mtk_svs.h |   23 +
>  4 files changed, 2109 insertions(+)
>  create mode 100644 drivers/power/avs/mtk_svs.c
>  create mode 100644 include/linux/power/mtk_svs.h
> [...]
> new file mode 100644
> index 000000000000..c46211a15fcd
> --- /dev/null
> +++ b/drivers/power/avs/mtk_svs.c
> [...]
> +
> +static bool svs_mt8183_efuse_parsing(struct mtk_svs *svs)
> +{
> +       const struct svs_platform *svsp = svs->platform;
> +       struct thermal_parameter tp;
> +       struct svs_bank *svsb;
> +       bool mon_mode_support = true;
> +       int format[6], x_roomt[6], tb_roomt = 0;
> +       u32 idx, i, ft_pgm, mts, temp0, temp1, temp2;
> +
> +       if (svsp->fake_efuse) {
> +               pr_notice("fake efuse\n");
> +               svs->efuse[0] = 0x00310080;
> +               svs->efuse[1] = 0xabfbf757;
> +               svs->efuse[2] = 0x47c747c7;
> +               svs->efuse[3] = 0xabfbf757;
> +               svs->efuse[4] = 0xe7fca0ec;
> +               svs->efuse[5] = 0x47bf4b88;
> +               svs->efuse[6] = 0xabfb8fa5;
> +               svs->efuse[7] = 0xabfb217b;
> +               svs->efuse[8] = 0x4bf34be1;
> +               svs->efuse[9] = 0xabfb670d;
> +               svs->efuse[16] = 0xabfbc653;
> +               svs->efuse[17] = 0x47f347e1;
> +               svs->efuse[18] = 0xabfbd848;
> +
> +               svs->thermal_efuse[0] = 0x02873f69;
> +               svs->thermal_efuse[1] = 0xa11d9142;
> +               svs->thermal_efuse[2] = 0xa2526900;
> +       }
> +
> +       for (i = 0; i < svsp->efuse_num; i++) {
> +               if (svs->efuse[i])
> +                       pr_notice("M_HW_RES%d: 0x%08x\n", i, svs->efuse[i]);
> +       }
> +
> +       /* svs efuse parsing */
> +       ft_pgm = (svs->efuse[0] >> 4) & 0xf;
> +
> +       for (idx = 0; idx < svsp->bank_num; idx++) {
> +               svsb = &svsp->banks[idx];
> +               if (ft_pgm <= 1)
> +                       svsb->init01_volt_flag = SVSB_INIT01_VOLT_IGNORE;
> +
> +               switch (svsb->sw_id) {
> +               case SVS_CPU_LITTLE:
> +                       svsb->bdes = svs->efuse[16] & GENMASK(7, 0);
> +                       svsb->mdes = (svs->efuse[16] >> 8) & GENMASK(7, 0);
> +                       svsb->dcbdet = (svs->efuse[16] >> 16) & GENMASK(7, 0);
> +                       svsb->dcmdet = (svs->efuse[16] >> 24) & GENMASK(7, 0);
> +                       svsb->mtdes  = (svs->efuse[17] >> 16) & GENMASK(7, 0);
> +
> +                       if (ft_pgm <= 3)
> +                               svsb->volt_offset += 10;
> +                       else
> +                               svsb->volt_offset += 2;
> +                       break;
> +               case SVS_CPU_BIG:
> +                       svsb->bdes = svs->efuse[18] & GENMASK(7, 0);
> +                       svsb->mdes = (svs->efuse[18] >> 8) & GENMASK(7, 0);
> +                       svsb->dcbdet = (svs->efuse[18] >> 16) & GENMASK(7, 0);
> +                       svsb->dcmdet = (svs->efuse[18] >> 24) & GENMASK(7, 0);
> +                       svsb->mtdes  = svs->efuse[17] & GENMASK(7, 0);
> +
> +                       if (ft_pgm <= 3)
> +                               svsb->volt_offset += 15;
> +                       else
> +                               svsb->volt_offset += 12;
> +                       break;
> +               case SVS_CCI:
> +                       svsb->bdes = svs->efuse[4] & GENMASK(7, 0);
> +                       svsb->mdes = (svs->efuse[4] >> 8) & GENMASK(7, 0);
> +                       svsb->dcbdet = (svs->efuse[4] >> 16) & GENMASK(7, 0);
> +                       svsb->dcmdet = (svs->efuse[4] >> 24) & GENMASK(7, 0);
> +                       svsb->mtdes  = (svs->efuse[5] >> 16) & GENMASK(7, 0);
> +
> +                       if (ft_pgm <= 3)
> +                               svsb->volt_offset += 10;
> +                       else
> +                               svsb->volt_offset += 2;
> +                       break;
> +               case SVS_GPU:
> +                       svsb->bdes = svs->efuse[6] & GENMASK(7, 0);
> +                       svsb->mdes = (svs->efuse[6] >> 8) & GENMASK(7, 0);
> +                       svsb->dcbdet = (svs->efuse[6] >> 16) & GENMASK(7, 0);
> +                       svsb->dcmdet = (svs->efuse[6] >> 24) & GENMASK(7, 0);
> +                       svsb->mtdes  = svs->efuse[5] & GENMASK(7, 0);
> +
> +                       if (ft_pgm >= 2) {
> +                               svsb->freq_base = 800000000; /* 800MHz */
> +                               svsb->dvt_fixed = 2;
> +                       }
> +                       break;
> +               default:
> +                       break;
> +               }
> +       }
> +
> +       /* Thermal efuse parsing */
> +       if (!svs->thermal_efuse)
> +               return true;
> +
> +       tp.adc_ge_t = (svs->thermal_efuse[1] >> 22) & GENMASK(9, 0);
> +       tp.adc_oe_t = (svs->thermal_efuse[1] >> 12) & GENMASK(9, 0);
> +
> +       tp.o_vtsmcu1 = (svs->thermal_efuse[0] >> 17) & GENMASK(8, 0);
> +       tp.o_vtsmcu2 = (svs->thermal_efuse[0] >> 8) & GENMASK(8, 0);
> +       tp.o_vtsmcu3 = svs->thermal_efuse[1] & GENMASK(8, 0);
> +       tp.o_vtsmcu4 = (svs->thermal_efuse[2] >> 23) & GENMASK(8, 0);
> +       tp.o_vtsmcu5 = (svs->thermal_efuse[2] >> 5) & GENMASK(8, 0);
> +       tp.o_vtsabb = (svs->thermal_efuse[2] >> 14) & GENMASK(8, 0);
> +
> +       tp.degc_cali = (svs->thermal_efuse[0] >> 1) & GENMASK(5, 0);
> +       tp.adc_cali_en_t = svs->thermal_efuse[0] & BIT(0);
> +       tp.o_slope_sign = (svs->thermal_efuse[0] >> 7) & BIT(0);
> +
> +       tp.ts_id = (svs->thermal_efuse[1] >> 9) & BIT(0);
> +       tp.o_slope = (svs->thermal_efuse[0] >> 26) & GENMASK(5, 0);
> +
> +       if (tp.adc_cali_en_t == 1) {
> +               if (tp.ts_id == 0)
> +                       tp.o_slope = 0;
> +
> +               if ((tp.adc_ge_t < 265 || tp.adc_ge_t > 758) ||
> +                   (tp.adc_oe_t < 265 || tp.adc_oe_t > 758) ||
> +                   (tp.o_vtsmcu1 < -8 || tp.o_vtsmcu1 > 484) ||
> +                   (tp.o_vtsmcu2 < -8 || tp.o_vtsmcu2 > 484) ||
> +                   (tp.o_vtsmcu3 < -8 || tp.o_vtsmcu3 > 484) ||
> +                   (tp.o_vtsmcu4 < -8 || tp.o_vtsmcu4 > 484) ||
> +                   (tp.o_vtsmcu5 < -8 || tp.o_vtsmcu5 > 484) ||
> +                   (tp.o_vtsabb < -8 || tp.o_vtsabb > 484) ||
> +                   (tp.degc_cali < 1 || tp.degc_cali > 63)) {
> +                       pr_err("bad thermal efuse data. disable mon mode\n");
> +                       mon_mode_support = false;
> +               }
> +       } else {
> +               pr_err("no thermal efuse data. disable mon mode\n");
> +               mon_mode_support = false;
> +       }
> +
> +       if (!mon_mode_support) {
> +               for (idx = 0; idx < svsp->bank_num; idx++) {
> +                       svsb = &svsp->banks[idx];
> +                       svsb->mode_support &= ~SVSB_MODE_MON;
> +               }
> +
> +               return true;
> +       }
> +
> +       tp.ge = ((tp.adc_ge_t - 512) * 10000) / 4096;
> +       tp.oe = (tp.adc_oe_t - 512);
> +       tp.gain = (10000 + tp.ge);
> +
> +       format[0] = (tp.o_vtsmcu1 + 3350 - tp.oe);
> +       format[1] = (tp.o_vtsmcu2 + 3350 - tp.oe);
> +       format[2] = (tp.o_vtsmcu3 + 3350 - tp.oe);
> +       format[3] = (tp.o_vtsmcu4 + 3350 - tp.oe);
> +       format[4] = (tp.o_vtsmcu5 + 3350 - tp.oe);
> +       format[5] = (tp.o_vtsabb + 3350 - tp.oe);
> +
> +       for (i = 0; i < 6; i++)
> +               x_roomt[i] = (((format[i] * 10000) / 4096) * 10000) / tp.gain;
> +
> +       temp0 = (10000 * 100000 / tp.gain) * 15 / 18;
> +
> +       if (tp.o_slope_sign == 0)
> +               mts = (temp0 * 10) / (1534 + tp.o_slope * 10);
> +       else
> +               mts = (temp0 * 10) / (1534 - tp.o_slope * 10);
> +
> +       for (idx = 0; idx < svsp->bank_num; idx++) {
> +               svsb = &svsp->banks[idx];
> +               svsb->mts = mts;
> +
> +               switch (svsb->sw_id) {
> +               case SVS_CPU_LITTLE:
> +                       tb_roomt = x_roomt[3];
> +                       break;
> +               case SVS_CPU_BIG:
> +                       tb_roomt = x_roomt[4];
> +                       break;
> +               case SVS_CCI:
> +                       tb_roomt = x_roomt[3];
> +                       break;
> +               case SVS_GPU:
> +                       tb_roomt = x_roomt[1];
> +                       break;
> +               default:
> +                       break;

There was a "return -EINVAL;" here in v5, should this be a "return
false"? This function currently always return true.

> +               }
> +
> +               temp0 = (tp.degc_cali * 10 / 2);
> +               temp1 = ((10000 * 100000 / 4096 / tp.gain) *
> +                        tp.oe + tb_roomt * 10) * 15 / 18;
> +
> +               if (tp.o_slope_sign == 0)
> +                       temp2 = temp1 * 100 / (1534 + tp.o_slope * 10);
> +               else
> +                       temp2 = temp1 * 100 / (1534 - tp.o_slope * 10);
> +
> +               svsb->bts = (temp0 + temp2 - 250) * 4 / 10;
> +       }
> +
> +       return true;
> +}
> [...]
> +
> +static int svs_resource_setup(struct mtk_svs *svs)
> +{
> +       const struct svs_platform *svsp = svs->platform;
> +       struct svs_bank *svsb;
> +       struct platform_device *pdev;
> +       struct device_node *np = NULL;
> +       struct dev_pm_opp *opp;
> +       unsigned long freq;
> +       int count, ret;
> +       u32 idx, i;
> +
> +       for (idx = 0; idx < svsp->bank_num; idx++) {
> +               svsb = &svsp->banks[idx];
> +
> +               switch (svsb->sw_id) {
> +               case SVS_CPU_LITTLE:
> +                       svsb->name = "SVS_CPU_LITTLE";
> +                       break;
> +               case SVS_CPU_BIG:
> +                       svsb->name = "SVS_CPU_BIG";
> +                       break;
> +               case SVS_CCI:
> +                       svsb->name = "SVS_CCI";
> +                       break;
> +               case SVS_GPU:
> +                       svsb->name = "SVS_GPU";
> +                       break;
> +               default:
> +                       WARN_ON(1);
> +                       return -EINVAL;
> +               }
> +
> +               /* Add svs bank device for opp-table/mtcmos/buck control */
> +               pdev = platform_device_alloc(svsb->name, 0);
> +               if (!pdev) {
> +                       pr_err("%s: fail to alloc pdev for svs_bank\n",
> +                              svsb->name);
> +                       return -ENOMEM;
> +               }
> +
> +               for_each_child_of_node(svs->dev->of_node, np) {
> +                       if (of_device_is_compatible(np, svsb->of_compatible)) {
> +                               pdev->dev.of_node = np;
> +                               break;
> +                       }
> +               }
> +
> +               ret = platform_device_add(pdev);
> +               if (ret) {
> +                       pr_err("%s: fail to add svs_bank device: %d\n",
> +                              svsb->name, ret);
> +                       return ret;
> +               }
> +
> +               svsb->dev = &pdev->dev;
> +               dev_set_drvdata(svsb->dev, svs);
> +               ret = dev_pm_opp_of_add_table(svsb->dev);
> +               if (ret) {
> +                       pr_err("%s: fail to add opp table: %d\n",
> +                              svsb->name, ret);
> +                       return ret;
> +               }
> +
> +               mutex_init(&svsb->lock);
> +
> +               svsb->buck = devm_regulator_get_optional(svsb->dev,
> +                                                        svsb->buck_name);
> +               if (IS_ERR(svsb->buck)) {
> +                       pr_err("%s: cannot get regulator \"%s-supply\"\n",
> +                              svsb->name, svsb->buck_name);
> +                       return PTR_ERR(svsb->buck);
> +               }
> +
> +               count = dev_pm_opp_get_opp_count(svsb->dev);
> +               if (svsb->opp_count != count) {
> +                       pr_err("%s: opp_count not \"%u\" but get \"%d\"?\n",
> +                              svsb->name, svsb->opp_count, count);
> +                       return count;
> +               }
> +
> +               for (i = 0, freq = (u32)-1; i < svsb->opp_count; i++, freq--) {

Can use U32_MAX instead of (u32)-1.

> +                       opp = dev_pm_opp_find_freq_floor(svsb->dev, &freq);
> +                       if (IS_ERR(opp)) {
> +                               pr_err("%s: error opp entry!!, err = %ld\n",
> +                                      svsb->name, PTR_ERR(opp));
> +                               return PTR_ERR(opp);
> +                       }
> +
> +                       svsb->opp_freqs[i] = freq;
> +                       svsb->opp_volts[i] = dev_pm_opp_get_voltage(opp);
> +                       svsb->freqs_pct[i] = percent(svsb->opp_freqs[i],
> +                                                    svsb->freq_base);
> +                       dev_pm_opp_put(opp);
> +               }
> +       }
> +
> +       return 0;
> +}
> +
> [...]
> +
> +static ssize_t svs_debug_proc_write(struct file *file,
> +                                   const char __user *buffer,
> +                                   size_t count, loff_t *pos)
> +{
> +       struct svs_bank *svsb = (struct svs_bank *)PDE_DATA(file_inode(file));
> +       struct mtk_svs *svs = dev_get_drvdata(svsb->dev);
> +       char *buf = (char *)__get_free_page(GFP_USER);
> +       unsigned long flags;
> +       int enabled, ret;
> +
> +       if (svsb->phase == SVSB_PHASE_ERROR)
> +               return count;
> +
> +       if (!buf)
> +               return -ENOMEM;
> +
> +       if (count >= PAGE_SIZE) {
> +               free_page((unsigned long)buf);
> +               return -EINVAL;
> +       }
> +
> +       if (copy_from_user(buf, buffer, count)) {
> +               free_page((unsigned long)buf);
> +               return -EFAULT;
> +       }
> +
> +       buf[count] = '\0';

Can use memdup_user_nul to allocate the buf and copy from user buffer
for the above operations (and for other _write() functions).

> +
> +       ret = kstrtoint(buf, 10, &enabled);
> +       if (ret)
> +               return ret;
> +
> +       if (!enabled) {
> +               flags = claim_mtk_svs_lock();
> +               svs->bank = svsb;
> +               svsb->mode_support = SVSB_MODE_ALL_DISABLE;
> +               svs_switch_bank(svs);
> +               svs_writel(svs, SVSEN_OFF, SVSEN);
> +               svs_writel(svs, INTSTS_CLEAN, INTSTS);
> +               release_mtk_svs_lock(flags);
> +       }
> +
> +       svsb->phase = SVSB_PHASE_ERROR;
> +       svsb_set_volts(svsb, true);

Missing free_page() (or kfree() if changing to memdup_user_nul) here
(and in other _write() functions).

> +
> +       return count;
> +}
> +
> +proc_fops_rw(svs_debug);
> +
> [...]

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ