| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e58888d7-9803-da5e-1054-690fe52284a1@samsung.com>
Date: Wed, 8 Jan 2020 21:01:14 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: Dmitry Osipenko <digetx@...il.com>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: leonard.crestez@....com, lukasz.luba@....com, a.swigon@...sung.com,
m.szyprowski@...sung.com, enric.balletbo@...labora.com,
hl@...k-chips.com, bjorn.andersson@...aro.org,
jcrouse@...eaurora.org, chanwoo@...nel.org,
myungjoo.ham@...sung.com, kyungmin.park@...sung.com
Subject: Re: [PATCH 2/2] PM / devfreq: Add devfreq_transitions debugfs file
On 1/8/20 7:56 PM, Chanwoo Choi wrote:
> Hi,
>
> On 1/8/20 6:31 AM, Dmitry Osipenko wrote:
>> Hello Chanwoo,
>>
>> 07.01.2020 12:05, Chanwoo Choi пишет:
>>> Add new devfreq_transitions debugfs file to track the frequency transitions
>>> of all devfreq devices for the simple profiling as following:
>>> - /sys/kernel/debug/devfreq/devfreq_transitions
>>>
>>> And the user can decide the storage size (CONFIG_NR_DEVFREQ_TRANSITIONS)
>>> in Kconfig in order to save the transition history.
>>>
>>> [Detailed description of each field of 'devfreq_transitions' debugfs file]
>>> - time_ms : Change time of frequency transition. (unit: millisecond)
>>> - dev_name : Device name of h/w.
>>> - dev : Device name made by devfreq core.
>>> - parent_dev : If devfreq device uses the passive governor,
>>> show parent devfreq device name.
>>> - load_% : If devfreq device uses the simple_ondemand governor,
>>> load is used by governor whene deciding the new frequency.
>>> (unit: percentage)
>>> - old_freq_hz : Frequency before changing. (unit: hz)
>>> - new_freq_hz : Frequency after changed. (unit: hz)
>>>
>>> [For example on Exynos5422-based Odroid-XU3 board]
>>> $ cat /sys/kernel/debug/devfreq/devfreq_transitions
>>> time_ms dev_name dev parent_dev load_% old_freq_hz new_freq_hz
>>> ---------- ------------------------------ ---------- ---------- ---------- ------------ ------------
>>> 14600 soc:bus_noc devfreq2 devfreq1 0 100000000 67000000
>>> 14600 soc:bus_fsys_apb devfreq3 devfreq1 0 200000000 100000000
>>> 14600 soc:bus_fsys devfreq4 devfreq1 0 200000000 100000000
>>> 14600 soc:bus_fsys2 devfreq5 devfreq1 0 150000000 75000000
>>> 14602 soc:bus_mfc devfreq6 devfreq1 0 222000000 96000000
>>> 14602 soc:bus_gen devfreq7 devfreq1 0 267000000 89000000
>>> 14602 soc:bus_g2d devfreq9 devfreq1 0 300000000 84000000
>>> 14602 soc:bus_g2d_acp devfreq10 devfreq1 0 267000000 67000000
>>> 14602 soc:bus_jpeg devfreq11 devfreq1 0 300000000 75000000
>>> 14602 soc:bus_jpeg_apb devfreq12 devfreq1 0 167000000 84000000
>>> 14603 soc:bus_disp1_fimd devfreq13 devfreq1 0 200000000 120000000
>>> 14603 soc:bus_disp1 devfreq14 devfreq1 0 300000000 120000000
>>> 14606 soc:bus_gscl_scaler devfreq15 devfreq1 0 300000000 150000000
>>> 14606 soc:bus_mscl devfreq16 devfreq1 0 333000000 84000000
>>> 14608 soc:bus_wcore devfreq1 9 333000000 84000000
>>> 14783 10c20000.memory-controller devfreq0 35 825000000 633000000
>>> 15873 soc:bus_wcore devfreq1 41 84000000 400000000
>>> 15873 soc:bus_noc devfreq2 devfreq1 0 67000000 100000000
>>> [snip]
>>>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
>>> ---
>>> drivers/devfreq/Kconfig | 13 +++
>>> drivers/devfreq/devfreq.c | 126 +++++++++++++++++++++++++++++
>>> drivers/devfreq/governor.h | 3 +
>>> drivers/devfreq/governor_passive.c | 2 +
>>> include/linux/devfreq.h | 1 +
>>> 5 files changed, 145 insertions(+)
>>>
>>> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
>>> index 0b1df12e0f21..84936eec0ef9 100644
>>> --- a/drivers/devfreq/Kconfig
>>> +++ b/drivers/devfreq/Kconfig
>>> @@ -74,6 +74,19 @@ config DEVFREQ_GOV_PASSIVE
>>> through sysfs entries. The passive governor recommends that
>>> devfreq device uses the OPP table to get the frequency/voltage.
>>>
>>> +comment "DEVFREQ Debugging"
>>> +
>>> +config NR_DEVFREQ_TRANSITIONS
>>> + int "Maximum storage size to save DEVFREQ Transitions (10-1000)"
>>> + depends on DEBUG_FS
>>> + range 10 1000
>>> + default "100"
>>> + help
>>> + Show the frequency transitions of all devfreq devices via
>>> + '/sys/kernel/debug/devfreq/devfreq_transitions' for the simple
>>> + profiling. It needs to decide the storage size to save transition
>>> + history of all devfreq devices.
>>> +
>>> comment "DEVFREQ Drivers"
>>>
>>> config ARM_EXYNOS_BUS_DEVFREQ
>>> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
>>> index c7f5e4e06420..7abaae06fa65 100644
>>> --- a/drivers/devfreq/devfreq.c
>>> +++ b/drivers/devfreq/devfreq.c
>>> @@ -268,6 +268,57 @@ int devfreq_update_status(struct devfreq *devfreq, unsigned long freq)
>>> }
>>> EXPORT_SYMBOL(devfreq_update_status);
>>> +/**
>>> + * devfreq_update_transitions() - Update frequency transitions for debugfs file
>>> + * @devfreq: the devfreq instance
>>> + * @old_freq: the previous frequency before changing the frequency
>>> + * @new_freq: the new frequency after frequency is changed
>>> + */
>>> +struct devfreq_transitions {
>>> + struct devfreq *devfreq;
>>> + struct devfreq_freqs freqs;
>>> + unsigned long load;
>>> +} debugfs_transitions[CONFIG_NR_DEVFREQ_TRANSITIONS];
>>> +
>>> +static spinlock_t devfreq_debugfs_lock;
>>
>> This could be:
>>
>> static DEFINE_SPINLOCK(devfreq_debugfs_lock);
>>
>> and then spin_lock_init() isn't needed.
>
> OK
>
>>
>>
>> Also, The "<linux/spinlock.h>" should be included directly by devfreq.c
>
> OK.
>
>>
>>> +static int debugfs_transitions_index;
>>> +
>>> +void devfreq_update_transitions(struct devfreq *devfreq,
>>> + unsigned long old_freq, unsigned long new_freq,
>>> + unsigned long busy_time, unsigned long total_time)
>>> +{
>>> + unsigned long load;
>>> + int i;
>>> +
>>> + if (!devfreq_debugfs || !devfreq || (old_freq == new_freq))
>>> + return;
>>> +
>>> + spin_lock_nested(&devfreq_debugfs_lock, SINGLE_DEPTH_NESTING);
>>> +
>>> + i = debugfs_transitions_index;
>>> +
>>> + /*
>>> + * Calculate the load and if load is larger than 100,
>>> + * initialize to 100 because the unit of load is percentage.
>>> + */
>>> + load = (total_time == 0 ? 0 : (100 * busy_time) / total_time);
>>> + if (load > 100)
>>> + load = 100;
>>> +
>>> + debugfs_transitions[i].devfreq = devfreq;
>>> + debugfs_transitions[i].freqs.time = ktime_to_ms(ktime_get());
>>> + debugfs_transitions[i].freqs.old = old_freq;
>>> + debugfs_transitions[i].freqs.new = new_freq;
>>> + debugfs_transitions[i].load = load;
>>> +
>>> + if (++i == CONFIG_NR_DEVFREQ_TRANSITIONS)
>>> + i = 0;
>>> + debugfs_transitions_index = i;
>>> +
>>> + spin_unlock(&devfreq_debugfs_lock);
>>> +}
>>> +EXPORT_SYMBOL(devfreq_update_transitions);
>>
>> What about EXPORT_SYMBOL_GPL()?
>
> I'll remove it.
Ah. It is needed to support module build.
it is used by passive governor.
>
>>
>>> /**
>>> * find_devfreq_governor() - Find devfreq governor from name
>>> * @name: name of the governor
>>> @@ -401,6 +452,10 @@ static int set_target(struct devfreq *devfreq,
>>> return err;
>>> }
>>>
>>> + devfreq_update_transitions(devfreq, cur_freq, new_freq,
>>> + devfreq->last_status.busy_time,
>>> + devfreq->last_status.total_time);
>>> +
>>> freqs.new = new_freq;
>>> notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE);
>>>
>>> @@ -1787,6 +1842,72 @@ static int devfreq_summary_show(struct seq_file *s, void *data)
>>> }
>>> DEFINE_SHOW_ATTRIBUTE(devfreq_summary);
>>>
>>> +/**
>>> + * devfreq_transitions_show() - Show the frequency transitions of the registered
>>> + * devfreq devices via 'devfreq_transitions' debugfs file.
>>> + */
>>> +static int devfreq_transitions_show(struct seq_file *s, void *data)
>>> +{
>>> + struct devfreq *devfreq = NULL;
>>> + struct devfreq *p_devfreq = NULL;
>>> + struct devfreq_freqs *freqs = NULL;
>>> + unsigned long load;
>>> + int i = debugfs_transitions_index;
>>> + int count;
>>> +
>>> + seq_printf(s, "%-10s %-30s %-10s %-10s %-6s %-12s %-12s\n",
>>> + "time_ms",
>>> + "dev_name",
>>> + "dev",
>>> + "parent_dev",
>>> + "load_%",
>>> + "old_freq_hz",
>>> + "new_freq_hz");
>>> + seq_printf(s, "%-10s %-30s %-10s %-10s %-6s %-12s %-12s\n",
>>> + "----------",
>>> + "------------------------------",
>>> + "----------",
>>> + "----------",
>>> + "----------",
>>> + "------------",
>>> + "------------");
>>> +
>>> + spin_lock(&devfreq_debugfs_lock);> + for (count = 0; count < CONFIG_NR_DEVFREQ_TRANSITIONS; count++) {
>>> + devfreq = debugfs_transitions[i].devfreq;
>>> + freqs = &debugfs_transitions[i].freqs;
>>> + load = debugfs_transitions[i].load;
>>> +
>>> + i = (CONFIG_NR_DEVFREQ_TRANSITIONS == ++i) ? 0 : i;
>>> + if (!devfreq)
>>> + continue;
>>> +
>>> +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE)
>>> + if (!strncmp(devfreq->governor_name,
>>> + DEVFREQ_GOV_PASSIVE, DEVFREQ_NAME_LEN)) {
>>> + struct devfreq_passive_data *data = devfreq->data;
>>> +
>>> + if (data)
>>> + p_devfreq = data->parent;
>>> + } else {
>>> + p_devfreq = NULL;
>>> + }
>>> +#endif
>>> + seq_printf(s, "%-10lld %-30s %-10s %-10s %-6ld %-12ld %-12ld\n",
>>> + freqs->time,
>>> + dev_name(devfreq->dev.parent),
>>> + dev_name(&devfreq->dev),
>>> + p_devfreq ? dev_name(&p_devfreq->dev) : "",
>>> + load,
>>> + freqs->old,
>>> + freqs->new);
>>> + }
>>> + spin_unlock(&devfreq_debugfs_lock);
>>> +
>>> + return 0;
>>> +}
>>> +DEFINE_SHOW_ATTRIBUTE(devfreq_transitions);
>>> +
>>> static int __init devfreq_init(void)
>>> {
>>> devfreq_class = class_create(THIS_MODULE, "devfreq");
>>> @@ -1808,9 +1929,14 @@ static int __init devfreq_init(void)
>>> devfreq_debugfs = NULL;
>>> pr_warn("%s: couldn't create debugfs dir\n", __FILE__);
>>> } else {
>>> + spin_lock_init(&devfreq_debugfs_lock);
>>> +
>>> debugfs_create_file("devfreq_summary", 0444,
>>> devfreq_debugfs, NULL,
>>> &devfreq_summary_fops);
>>> + debugfs_create_file("devfreq_transitions", 0444,
>>> + devfreq_debugfs, NULL,
>>> + &devfreq_transitions_fops);
>>> }
>>>
>>> return 0;
>>> diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
>>> index dc7533ccc3db..01eecfdaf2d6 100644
>>> --- a/drivers/devfreq/governor.h
>>> +++ b/drivers/devfreq/governor.h
>>> @@ -68,6 +68,9 @@ extern int devfreq_add_governor(struct devfreq_governor *governor);
>>> extern int devfreq_remove_governor(struct devfreq_governor *governor);
>>>
>>> extern int devfreq_update_status(struct devfreq *devfreq, unsigned long freq);
>>> +extern void devfreq_update_transitions(struct devfreq *devfreq,
>>> + unsigned long old_freq, unsigned long new_freq,
>>> + unsigned long busy_time, unsigned long total_time);
>>
>> The 'extern' attribute isn't needed for function prototypes defined in
>> header files.
>>
>>
>
> Right. I'll remove it.
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
Powered by blists - more mailing lists