| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200109083926.GA5377@arbad>
Date: Thu, 9 Jan 2020 09:39:28 +0100
From: Andreas Klinger <ak@...klinger.de>
To: jic23@...nel.org, robh+dt@...nel.org, mark.rutland@....com
Cc: knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
rpi-receiver@...-steyr.ac.at, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/2] iio: srf04: add power management feature
Add suspend and resume operations for being used by optional power
management.
The suspend function is switching off an GPIO which can be used by the
hardware to switch power off. The resume function is switching the GPIO
on and sleeps an adjustable time to give the device a chance to be up
and running.
If activated the driver gets into autosuspend after some time of
inactivity.
Suggested-by: Franz Parzer <rpi-receiver@...-steyr.ac.at>
Signed-off-by: Andreas Klinger <ak@...klinger.de>
---
drivers/iio/proximity/srf04.c | 104 +++++++++++++++++++++++++++++++++-
1 file changed, 103 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/proximity/srf04.c b/drivers/iio/proximity/srf04.c
index 01eb8cc63076..b19d910298d6 100644
--- a/drivers/iio/proximity/srf04.c
+++ b/drivers/iio/proximity/srf04.c
@@ -45,6 +45,7 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/pm_runtime.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -56,6 +57,7 @@ struct srf04_data {
struct device *dev;
struct gpio_desc *gpiod_trig;
struct gpio_desc *gpiod_echo;
+ struct gpio_desc *gpiod_power;
struct mutex lock;
int irqnr;
ktime_t ts_rising;
@@ -63,6 +65,7 @@ struct srf04_data {
struct completion rising;
struct completion falling;
const struct srf04_cfg *cfg;
+ int startup_time_ms;
};
static const struct srf04_cfg srf04_cfg = {
@@ -97,6 +100,9 @@ static int srf04_read(struct srf04_data *data)
u64 dt_ns;
u32 time_ns, distance_mm;
+ if (data->gpiod_power)
+ pm_runtime_get_sync(data->dev);
+
/*
* just one read-echo-cycle can take place at a time
* ==> lock against concurrent reading calls
@@ -110,6 +116,11 @@ static int srf04_read(struct srf04_data *data)
udelay(data->cfg->trigger_pulse_us);
gpiod_set_value(data->gpiod_trig, 0);
+ if (data->gpiod_power) {
+ pm_runtime_mark_last_busy(data->dev);
+ pm_runtime_put_autosuspend(data->dev);
+ }
+
/* it should not take more than 20 ms until echo is rising */
ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
if (ret < 0) {
@@ -268,6 +279,26 @@ static int srf04_probe(struct platform_device *pdev)
return PTR_ERR(data->gpiod_echo);
}
+#ifdef CONFIG_PM
+ data->gpiod_power = devm_gpiod_get_optional(dev, "power",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(data->gpiod_power)) {
+ dev_err(dev, "failed to get power-gpios: err=%ld\n",
+ PTR_ERR(data->gpiod_power));
+ return PTR_ERR(data->gpiod_power);
+ }
+ if (data->gpiod_power) {
+
+ if (of_property_read_u32(dev->of_node, "startup-time-ms",
+ &data->startup_time_ms))
+ data->startup_time_ms = 100;
+ dev_dbg(dev, "using power gpio: startup-time-ms=%d\n",
+ data->startup_time_ms);
+ }
+#else
+ data->gpiod_power = NULL;
+#endif
+
if (gpiod_cansleep(data->gpiod_echo)) {
dev_err(data->dev, "cansleep-GPIOs not supported\n");
return -ENODEV;
@@ -296,14 +327,85 @@ static int srf04_probe(struct platform_device *pdev)
indio_dev->channels = srf04_chan_spec;
indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
- return devm_iio_device_register(dev, indio_dev);
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(data->dev, "iio_device_register: %d\n", ret);
+ return ret;
+ }
+
+ if (data->gpiod_power) {
+ pm_runtime_set_autosuspend_delay(data->dev, 1000);
+ pm_runtime_use_autosuspend(data->dev);
+
+ ret = pm_runtime_set_active(data->dev);
+ if (ret) {
+ dev_err(data->dev, "pm_runtime_set_active: %d\n", ret);
+ iio_device_unregister(indio_dev);
+ }
+
+ pm_runtime_enable(data->dev);
+ pm_runtime_idle(data->dev);
+ }
+
+ return ret;
}
+static int srf04_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct srf04_data *data = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ if (data->gpiod_power) {
+ pm_runtime_disable(data->dev);
+ pm_runtime_set_suspended(data->dev);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int srf04_pm_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct srf04_data *data = iio_priv(indio_dev);
+
+ gpiod_set_value(data->gpiod_power, 0);
+
+ return 0;
+}
+
+static int srf04_pm_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct srf04_data *data = iio_priv(indio_dev);
+
+ gpiod_set_value(data->gpiod_power, 1);
+ msleep(data->startup_time_ms);
+
+ return 0;
+}
+
+static const struct dev_pm_ops srf04_pm_ops = {
+ SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
+ srf04_pm_runtime_resume, NULL)
+};
+#endif
+
static struct platform_driver srf04_driver = {
.probe = srf04_probe,
+ .remove = srf04_remove,
.driver = {
.name = "srf04-gpio",
.of_match_table = of_srf04_match,
+#ifdef CONFIG_PM
+ .pm = &srf04_pm_ops,
+#endif
},
};
--
2.20.1
Powered by blists - more mailing lists