[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <9f861920380df9d7a6d52c905fc47643eb25f33f.1578560282.git.benchuanggli@gmail.com>
Date: Thu, 9 Jan 2020 17:14:41 +0800
From: Ben Chuang <benchuanggli@...il.com>
To: adrian.hunter@...el.com, ulf.hansson@...aro.org
Cc: linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
greg.tu@...esyslogic.com.tw, ben.chuang@...esyslogic.com.tw,
Ben Chuang <benchuanggli@...il.com>,
kbuild test robot <lkp@...el.com>
Subject: [RFC PATCH v2 3/6] mmc: host: Add UHS-II support in host layer
From: Ben Chuang <ben.chuang@...esyslogic.com.tw>
Add UHS-II support in host layer
Reported-by: kbuild test robot <lkp@...el.com>
Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
---
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/{sdhci.c => sdhci-core.c} | 276 ++++++--
drivers/mmc/host/sdhci-milbeaut.c | 4 +-
drivers/mmc/host/sdhci-of-arasan.c | 4 +-
drivers/mmc/host/sdhci-of-at91.c | 4 +-
drivers/mmc/host/sdhci-omap.c | 2 +-
drivers/mmc/host/sdhci-pci-core.c | 4 +-
drivers/mmc/host/sdhci-pxav3.c | 4 +-
drivers/mmc/host/sdhci-uhs2.c | 751 +++++++++++++++++++++
drivers/mmc/host/sdhci-uhs2.h | 34 +
drivers/mmc/host/sdhci-xenon.c | 4 +-
drivers/mmc/host/sdhci.h | 284 +++++++-
drivers/mmc/host/sdhci_am654.c | 4 +-
include/linux/mmc/uhs2.h | 270 ++++++++
14 files changed, 1583 insertions(+), 63 deletions(-)
rename drivers/mmc/host/{sdhci.c => sdhci-core.c} (94%)
create mode 100644 drivers/mmc/host/sdhci-uhs2.c
create mode 100644 drivers/mmc/host/sdhci-uhs2.h
create mode 100644 include/linux/mmc/uhs2.h
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 21d9089e5eda..6880d0a1ef16 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_MXC) += mxcmmc.o
obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
+sdhci-y += sdhci-core.o sdhci-uhs2.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci-core.c
similarity index 94%
rename from drivers/mmc/host/sdhci.c
rename to drivers/mmc/host/sdhci-core.c
index 1b1c26da3fe0..82184684f963 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci-core.c
@@ -30,8 +30,12 @@
#include <linux/mmc/card.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/slot-gpio.h>
+#include <linux/mmc/uhs2.h>
+#include <linux/pci.h>
#include "sdhci.h"
+#include "sdhci-uhs2.h"
+#include "sdhci-pci.h"
#define DRIVER_NAME "sdhci"
@@ -46,10 +50,6 @@
static unsigned int debug_quirks = 0;
static unsigned int debug_quirks2;
-static void sdhci_finish_data(struct sdhci_host *);
-
-static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
-
void sdhci_dumpregs(struct sdhci_host *host)
{
SDHCI_DUMP("============ SDHCI REGISTER DUMP ===========\n");
@@ -109,6 +109,29 @@ void sdhci_dumpregs(struct sdhci_host *host)
}
}
+ if (host->mmc && host->mmc->flags & MMC_UHS2_SUPPORT) {
+ SDHCI_DUMP("==================== UHS2 ==================\n");
+ SDHCI_DUMP("Blk Size: 0x%08x | Blk Cnt: 0x%08x\n",
+ sdhci_readw(host, SDHCI_UHS2_BLOCK_SIZE),
+ sdhci_readl(host, SDHCI_UHS2_BLOCK_COUNT));
+ SDHCI_DUMP("Cmd: 0x%08x | Trn mode: 0x%08x\n",
+ sdhci_readw(host, SDHCI_UHS2_COMMAND),
+ sdhci_readw(host, SDHCI_UHS2_TRANS_MODE));
+ SDHCI_DUMP("Int Stat: 0x%08x | Dev Sel : 0x%08x\n",
+ sdhci_readw(host, SDHCI_UHS2_DEV_INT_STATUS),
+ sdhci_readb(host, SDHCI_UHS2_DEV_SELECT));
+ SDHCI_DUMP("Dev Int Code: 0x%08x\n",
+ sdhci_readb(host, SDHCI_UHS2_DEV_INT_CODE));
+ SDHCI_DUMP("Reset: 0x%08x | Timer: 0x%08x\n",
+ sdhci_readw(host, SDHCI_UHS2_SW_RESET),
+ sdhci_readw(host, SDHCI_UHS2_TIMER_CTRL));
+ SDHCI_DUMP("ErrInt: 0x%08x | ErrIntEn: 0x%08x\n",
+ sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS),
+ sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS_EN));
+ SDHCI_DUMP("ErrSigEn: 0x%08x\n",
+ sdhci_readl(host, SDHCI_UHS2_ERR_INT_SIG_EN));
+ }
+
SDHCI_DUMP("============================================\n");
}
EXPORT_SYMBOL_GPL(sdhci_dumpregs);
@@ -187,13 +210,14 @@ static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
pm_runtime_get_noresume(host->mmc->parent);
}
-static void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
+void sdhci_runtime_pm_bus_off(struct sdhci_host *host)
{
if (!host->bus_on)
return;
host->bus_on = false;
pm_runtime_put_noidle(host->mmc->parent);
}
+EXPORT_SYMBOL_GPL(sdhci_runtime_pm_bus_off);
void sdhci_reset(struct sdhci_host *host, u8 mask)
{
@@ -1022,6 +1046,9 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
}
sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+
+ if (host->mmc->flags & MMC_UHS2_SUPPORT)
+ sdhci_uhs2_set_timeout(host);
}
}
@@ -1133,21 +1160,29 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
sdhci_set_transfer_irqs(host);
- /* Set the DMA boundary value and block size */
- sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
- SDHCI_BLOCK_SIZE);
-
- /*
- * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count
- * can be supported, in that case 16-bit block count register must be 0.
- */
- if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
- (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
- if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
- sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
- sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
+ if (host->mmc->flags & MMC_UHS2_SUPPORT &&
+ host->mmc->flags & MMC_UHS2_INITIALIZED) {
+ sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE);
+ sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT);
} else {
- sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+ /* Set the DMA boundary value and block size */
+ sdhci_writew(host,
+ SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
+ SDHCI_BLOCK_SIZE);
+
+ /*
+ * For Version 4.10 onwards, if v4 mode is enabled, 32-bit
+ * Block Count can be supported, in that case 16-bit block
+ * count register must be 0.
+ */
+ if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
+ (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
+ if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
+ sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
+ sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
+ } else {
+ sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+ }
}
}
@@ -1201,6 +1236,11 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
u16 mode = 0;
struct mmc_data *data = cmd->data;
+ if (host->mmc->flags & MMC_UHS2_SUPPORT) {
+ sdhci_uhs2_set_transfer_mode(host, cmd);
+ return;
+ }
+
if (data == NULL) {
if (host->quirks2 &
SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
@@ -1283,14 +1323,15 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
sdhci_led_deactivate(host);
}
-static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
+void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
{
__sdhci_finish_mrq(host, mrq);
queue_work(host->complete_wq, &host->complete_work);
}
+EXPORT_SYMBOL_GPL(sdhci_finish_mrq);
-static void sdhci_finish_data(struct sdhci_host *host)
+void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_command *data_cmd = host->data_cmd;
struct mmc_data *data = host->data;
@@ -1324,6 +1365,11 @@ static void sdhci_finish_data(struct sdhci_host *host)
else
data->bytes_xfered = data->blksz * data->blocks;
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED) {
+ __sdhci_finish_mrq(host, data->mrq);
+ return;
+ }
+
/*
* Need to send CMD12 if -
* a) open-ended multiblock transfer (no CMD23)
@@ -1348,6 +1394,7 @@ static void sdhci_finish_data(struct sdhci_host *host)
__sdhci_finish_mrq(host, data->mrq);
}
}
+EXPORT_SYMBOL_GPL(sdhci_finish_data);
void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
{
@@ -1397,8 +1444,6 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
sdhci_prepare_data(host, cmd);
- sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
-
sdhci_set_transfer_mode(host, cmd);
if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
@@ -1437,6 +1482,12 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
timeout += 10 * HZ;
sdhci_mod_timer(host, cmd->mrq, timeout);
+ if (host->mmc->flags & MMC_UHS2_SUPPORT) {
+ sdhci_uhs2_send_command(host, cmd);
+ return;
+ }
+ sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
+
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
}
EXPORT_SYMBOL_GPL(sdhci_send_command);
@@ -1464,10 +1515,13 @@ static void sdhci_read_rsp_136(struct sdhci_host *host, struct mmc_command *cmd)
static void sdhci_finish_command(struct sdhci_host *host)
{
struct mmc_command *cmd = host->cmd;
+ int uhs2_flag = 0;
- host->cmd = NULL;
-
- if (cmd->flags & MMC_RSP_PRESENT) {
+ if (host->mmc->flags & MMC_UHS2_SUPPORT) {
+ sdhci_uhs2_finish_command(host);
+ uhs2_flag = 1;
+ } else if (cmd->flags & MMC_RSP_PRESENT) {
+ host->cmd = NULL;
if (cmd->flags & MMC_RSP_136) {
sdhci_read_rsp_136(host, cmd);
} else {
@@ -1475,6 +1529,9 @@ static void sdhci_finish_command(struct sdhci_host *host)
}
}
+ if (!uhs2_flag)
+ host->cmd = NULL;
+
if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd)
mmc_command_done(host->mmc, cmd->mrq);
@@ -1494,6 +1551,7 @@ static void sdhci_finish_command(struct sdhci_host *host)
} else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) &&
cmd == host->data_cmd) {
/* Command complete before busy is ended */
+ host->cmd = NULL;
return;
}
}
@@ -1510,6 +1568,8 @@ static void sdhci_finish_command(struct sdhci_host *host)
if (!cmd->data)
__sdhci_finish_mrq(host, cmd->mrq);
}
+
+ host->cmd = NULL;
}
static u16 sdhci_get_preset_value(struct sdhci_host *host)
@@ -1537,6 +1597,9 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
case MMC_TIMING_MMC_HS400:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
break;
+ case MMC_TIMING_UHS2:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_UHS2);
+ break;
default:
pr_warn("%s: Invalid UHS-I mode selected\n",
mmc_hostname(host->mmc));
@@ -1708,12 +1771,16 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
EXPORT_SYMBOL_GPL(sdhci_set_clock);
static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ if (mmc->caps & MMC_CAP_UHS2 &&
+ !IS_ERR(mmc->supply.vmmc2))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, vdd2);
+
if (mode != MMC_POWER_OFF)
sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
else
@@ -1721,7 +1788,7 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
}
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
u8 pwr = 0;
@@ -1752,6 +1819,20 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
}
}
+ if (mode != MMC_POWER_OFF) {
+ if (vdd2 != (unsigned short)-1) {
+ switch (1 << vdd2) {
+ case MMC_VDD2_165_195:
+ pwr |= SDHCI_VDD2_POWER_180;
+ break;
+ default:
+ WARN(1, "%s: Invalid vdd2 %#x\n",
+ mmc_hostname(host->mmc), vdd2);
+ break;
+ }
+ }
+ }
+
if (host->pwr == pwr)
return;
@@ -1778,8 +1859,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
pwr |= SDHCI_POWER_ON;
+ if (vdd2 != (unsigned short)-1)
+ pwr |= SDHCI_VDD2_POWER_ON;
+ sdhci_writeb(host, pwr&0xf, SDHCI_POWER_CONTROL);
+ mdelay(5);
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ mdelay(5);
if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
sdhci_runtime_pm_bus_on(host);
@@ -1795,12 +1881,12 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
EXPORT_SYMBOL_GPL(sdhci_set_power_noreg);
void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
if (IS_ERR(host->mmc->supply.vmmc))
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, vdd2);
else
- sdhci_set_power_reg(host, mode, vdd);
+ sdhci_set_power_reg(host, mode, vdd, vdd2);
}
EXPORT_SYMBOL_GPL(sdhci_set_power);
@@ -1899,6 +1985,7 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
u8 ctrl;
+ u16 ctrl_2;
if (ios->power_mode == MMC_POWER_UNDEFINED)
return;
@@ -1907,6 +1994,10 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (!IS_ERR(mmc->supply.vmmc) &&
ios->power_mode == MMC_POWER_OFF)
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+ if (host->mmc->caps & MMC_CAP_UHS2 &&
+ !IS_ERR(mmc->supply.vmmc2) &&
+ ios->power_mode == MMC_POWER_OFF)
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, 0);
return;
}
@@ -1925,6 +2016,9 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
sdhci_enable_preset_value(host, false);
if (!ios->clock || ios->clock != host->clock) {
+ if (ios->timing == MMC_TIMING_UHS2)
+ host->timing = ios->timing;
+
host->ops->set_clock(host, ios->clock);
host->clock = ios->clock;
@@ -1942,9 +2036,19 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
if (host->ops->set_power)
- host->ops->set_power(host, ios->power_mode, ios->vdd);
+ host->ops->set_power(host, ios->power_mode, ios->vdd, -1);
else
- sdhci_set_power(host, ios->power_mode, ios->vdd);
+ sdhci_set_power(host, ios->power_mode, ios->vdd, -1);
+
+ /* 4.0 host support */
+ if (host->version >= SDHCI_SPEC_400) {
+ /* UHS2 Support */
+ if (host->mmc->flags & MMC_UHS2_SUPPORT &&
+ host->mmc->caps & MMC_CAP_UHS2) {
+ sdhci_uhs2_do_set_ios(host, ios);
+ return;
+ }
+ }
if (host->ops->platform_send_init_74_clocks)
host->ops->platform_send_init_74_clocks(host, ios->power_mode);
@@ -1969,7 +2073,7 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
if (host->version >= SDHCI_SPEC_300) {
- u16 clk, ctrl_2;
+ u16 clk;
if (!host->preset_enabled) {
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
@@ -2181,8 +2285,12 @@ int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
/*
* Signal Voltage Switching is only applicable for Host Controllers
* v3.00 and above.
+ * But for UHS2, the signal voltage is supplied by vdd2 which is
+ * already 1.8v so no voltage siwtch required.
*/
- if (host->version < SDHCI_SPEC_300)
+ if (host->version < SDHCI_SPEC_300 ||
+ (host->version >= SDHCI_SPEC_400 &&
+ host->flags & SDHCI_USE_UHS2))
return 0;
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
@@ -2511,7 +2619,7 @@ int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
}
EXPORT_SYMBOL_GPL(sdhci_execute_tuning);
-static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
+void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
{
/* Host Controller v3.00 defines preset value registers */
if (host->version < SDHCI_SPEC_300)
@@ -2539,6 +2647,7 @@ static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
host->preset_enabled = enable;
}
}
+EXPORT_SYMBOL_GPL(sdhci_enable_preset_value);
static void sdhci_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
int err)
@@ -2611,6 +2720,64 @@ static void sdhci_card_event(struct mmc_host *mmc)
spin_unlock_irqrestore(&host->lock, flags);
}
+static int sdhci_uhs2_detect_init(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int ret;
+
+ ret = sdhci_uhs2_do_detect_init(host);
+
+ return ret;
+}
+
+static int sdhci_uhs2_set_reg(struct mmc_host *mmc, enum uhs2_act act)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ int ret;
+
+ ret = sdhci_uhs2_do_set_reg(host, act);
+
+ return ret;
+}
+
+void sdhci_uhs2_disable_clk(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u16 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+
+ clk &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_disable_clk);
+
+void sdhci_uhs2_enable_clk(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u16 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ ktime_t timeout;
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = ktime_add_ms(ktime_get(), 20);
+ while (1) {
+ bool timedout = ktime_after(ktime_get(), timeout);
+
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ if (clk & SDHCI_CLOCK_INT_STABLE)
+ break;
+ if (timedout) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return;
+ }
+ udelay(10);
+ }
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_enable_clk);
+
static const struct mmc_host_ops sdhci_ops = {
.request = sdhci_request,
.post_req = sdhci_post_req,
@@ -2626,6 +2793,10 @@ static const struct mmc_host_ops sdhci_ops = {
.execute_tuning = sdhci_execute_tuning,
.card_event = sdhci_card_event,
.card_busy = sdhci_card_busy,
+ .uhs2_detect_init = sdhci_uhs2_detect_init,
+ .uhs2_set_reg = sdhci_uhs2_set_reg,
+ .uhs2_disable_clk = sdhci_uhs2_disable_clk,
+ .uhs2_enable_clk = sdhci_uhs2_enable_clk,
};
/*****************************************************************************\
@@ -2726,11 +2897,16 @@ static bool sdhci_request_done(struct sdhci_host *host)
/* This is to force an update */
host->ops->set_clock(host, host->clock);
- /* Spec says we should do both at the same time, but Ricoh
- controllers do not like that. */
- sdhci_do_reset(host, SDHCI_RESET_CMD);
- sdhci_do_reset(host, SDHCI_RESET_DATA);
-
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED) {
+ sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD);
+ } else {
+ /*
+ * Spec says we should do both at the same time, but
+ * Ricoh controllers do not like that.
+ */
+ sdhci_do_reset(host, SDHCI_RESET_CMD);
+ sdhci_do_reset(host, SDHCI_RESET_DATA);
+ }
host->pending_reset = false;
}
@@ -3082,6 +3258,11 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
SDHCI_INT_BUS_POWER);
sdhci_writel(host, mask, SDHCI_INT_STATUS);
+ if (intmask & SDHCI_INT_ERROR &&
+ host->mmc->flags & MMC_UHS2_SUPPORT) {
+ sdhci_uhs2_irq(host);
+ }
+
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT;
@@ -3770,6 +3951,13 @@ int sdhci_setup_host(struct sdhci_host *host)
if (host->quirks & SDHCI_QUIRK_BROKEN_CQE)
mmc->caps2 &= ~MMC_CAP2_CQE;
+ if ((host->version >= SDHCI_SPEC_400) &&
+ (host->caps1 & SDHCI_SUPPORT_UHS2) &&
+ host->v4_mode) {
+ mmc->caps |= MMC_CAP_UHS2;
+ mmc->flags |= MMC_UHS2_SUPPORT;
+ }
+
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
else if (!(host->caps & SDHCI_CAN_DO_SDMA))
@@ -4248,6 +4436,9 @@ int sdhci_setup_host(struct sdhci_host *host)
/* This may alter mmc->*_blk_* parameters */
sdhci_allocate_bounce_buffer(host);
+ if (host->version >= SDHCI_SPEC_400)
+ sdhci_uhs2_add_host(host, host->caps1);
+
return 0;
unreg:
@@ -4332,6 +4523,7 @@ int __sdhci_add_host(struct sdhci_host *host)
unled:
sdhci_led_unregister(host);
unirq:
+ sdhci_uhs2_remove_host(host, 0);
sdhci_do_reset(host, SDHCI_RESET_ALL);
sdhci_writel(host, 0, SDHCI_INT_ENABLE);
sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
@@ -4389,6 +4581,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
sdhci_led_unregister(host);
+ sdhci_uhs2_remove_host(host, dead);
+
if (!dead)
sdhci_do_reset(host, SDHCI_RESET_ALL);
diff --git a/drivers/mmc/host/sdhci-milbeaut.c b/drivers/mmc/host/sdhci-milbeaut.c
index a1aa21b9ae1c..1c076f885670 100644
--- a/drivers/mmc/host/sdhci-milbeaut.c
+++ b/drivers/mmc/host/sdhci-milbeaut.c
@@ -122,14 +122,14 @@ static void sdhci_milbeaut_reset(struct sdhci_host *host, u8 mask)
}
static void sdhci_milbeaut_set_power(struct sdhci_host *host,
- unsigned char mode, unsigned short vdd)
+ unsigned char mode, unsigned short vdd, unsigned short vdd2)
{
if (!IS_ERR(host->mmc->supply.vmmc)) {
struct mmc_host *mmc = host->mmc;
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
}
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
}
static const struct sdhci_ops sdhci_milbeaut_ops = {
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index e49b44b4d82e..7bc5c60544f1 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -326,14 +326,14 @@ static int sdhci_arasan_voltage_switch(struct mmc_host *mmc,
}
static void sdhci_arasan_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
if (!IS_ERR(host->mmc->supply.vmmc)) {
struct mmc_host *mmc = host->mmc;
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
}
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
}
static const struct sdhci_ops sdhci_arasan_ops = {
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 5959e394b416..59237568fdc3 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -100,14 +100,14 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
* an external regulator.
*/
static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
if (!IS_ERR(host->mmc->supply.vmmc)) {
struct mmc_host *mmc = host->mmc;
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
}
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
}
static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host,
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 083e7e053c95..3b59c20e5f58 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -671,7 +671,7 @@ static void sdhci_omap_set_clock(struct sdhci_host *host, unsigned int clock)
}
static void sdhci_omap_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 5091e2c1c0e5..1cfb22276047 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -630,12 +630,12 @@ static int bxt_get_cd(struct mmc_host *mmc)
#define SDHCI_INTEL_PWR_TIMEOUT_UDELAY 100
static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
int cntr;
u8 reg;
- sdhci_set_power(host, mode, vdd);
+ sdhci_set_power(host, mode, vdd, -1);
if (mode == MMC_POWER_OFF)
return;
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e55037ceda73..457e9425339a 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -298,12 +298,12 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
}
static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
u8 pwr = host->pwr;
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
if (host->pwr == pwr)
return;
diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
new file mode 100644
index 000000000000..e9c42894185a
--- /dev/null
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -0,0 +1,751 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * linux/drivers/mmc/host/sdhci_uhs2.c - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/mmc/mmc.h>
+
+#include "sdhci.h"
+#include "sdhci-uhs2.h"
+
+#define DRIVER_NAME "sdhci_uhs2"
+#define DBG(f, x...) \
+ pr_debug(DRIVER_NAME " [%s()]: " f, __func__, ## x)
+
+static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+{
+ u32 ier;
+
+ ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+ ier &= ~clear;
+ ier |= set;
+ sdhci_writel(host, ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+}
+
+void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear,
+ u32 set)
+{
+ u32 ier;
+
+ ier = sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS_EN);
+ ier &= ~clear;
+ ier |= set;
+ sdhci_writel(host, ier, SDHCI_UHS2_ERR_INT_STATUS_EN);
+ sdhci_writel(host, ier, SDHCI_UHS2_ERR_INT_SIG_EN);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_clear_set_irqs);
+
+void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask)
+{
+ unsigned long timeout;
+
+ if (!(host->mmc->caps & MMC_CAP_UHS2))
+ return;
+
+ sdhci_writew(host, mask, SDHCI_UHS2_SW_RESET);
+
+ if (mask & SDHCI_UHS2_SW_RESET_FULL) {
+ host->clock = 0;
+ /* Reset-all turns off SD Bus Power */
+ if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
+ sdhci_runtime_pm_bus_off(host);
+ }
+
+ /* Wait max 100 ms */
+ timeout = 10000;
+
+ /* hw clears the bit when it's done */
+ while (sdhci_readw(host, SDHCI_UHS2_SW_RESET) & mask) {
+ if (timeout == 0) {
+ pr_err("%s: %s: Reset 0x%x never completed.\n",
+ __func__, mmc_hostname(host->mmc), (int)mask);
+ pr_err("%s: clean reset bit\n",
+ mmc_hostname(host->mmc));
+ sdhci_writeb(host, 0, SDHCI_UHS2_SW_RESET);
+ return;
+ }
+ timeout--;
+ udelay(10);
+ }
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_reset);
+
+static u8 sdhci_calc_timeout_uhs2(struct sdhci_host *host, u8 *cmd_res,
+ u8 *dead_lock)
+{
+ u8 count;
+ unsigned int cmd_res_timeout, dead_lock_timeout, current_timeout;
+
+ /*
+ * If the host controller provides us with an incorrect timeout
+ * value, just skip the check and use 0xE. The hardware may take
+ * longer to time out, but that's much better than having a too-short
+ * timeout value.
+ */
+ if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) {
+ *cmd_res = 0xE;
+ *dead_lock = 0xE;
+ return 0xE;
+ }
+
+ /* timeout in us */
+ cmd_res_timeout = 5 * 1000;
+ dead_lock_timeout = 1 * 1000 * 1000;
+
+ /*
+ * Figure out needed cycles.
+ * We do this in steps in order to fit inside a 32 bit int.
+ * The first step is the minimum timeout, which will have a
+ * minimum resolution of 6 bits:
+ * (1) 2^13*1000 > 2^22,
+ * (2) host->timeout_clk < 2^16
+ * =>
+ * (1) / (2) > 2^6
+ */
+ count = 0;
+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+ while (current_timeout < cmd_res_timeout) {
+ count++;
+ current_timeout <<= 1;
+ if (count >= 0xF)
+ break;
+ }
+
+ if (count >= 0xF) {
+ DBG("%s: Too large timeout 0x%x requested for CMD_RES!\n",
+ mmc_hostname(host->mmc), count);
+ count = 0xE;
+ }
+ *cmd_res = count;
+
+ count = 0;
+ current_timeout = (1 << 13) * 1000 / host->timeout_clk;
+ while (current_timeout < dead_lock_timeout) {
+ count++;
+ current_timeout <<= 1;
+ if (count >= 0xF)
+ break;
+ }
+
+ if (count >= 0xF) {
+ DBG("%s: Too large timeout 0x%x requested for DEADLOCK!\n",
+ mmc_hostname(host->mmc), count);
+ count = 0xE;
+ }
+ *dead_lock = count;
+
+ return count;
+}
+
+void sdhci_uhs2_set_timeout(struct sdhci_host *host)
+{
+ u8 cmd_res, dead_lock;
+
+ sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
+ cmd_res |= dead_lock << SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT;
+ sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_set_timeout);
+
+void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host,
+ struct mmc_command *cmd)
+{
+ u16 mode;
+ struct mmc_data *data = cmd->data;
+ u16 arg;
+
+ if (data == NULL) {
+ /* clear Auto CMD settings for no data CMDs */
+ arg = cmd->uhs2_cmd->arg;
+ if ((((arg & 0xF) << 8) | ((arg >> 8) & 0xFF)) ==
+ UHS2_DEV_CMD_TRANS_ABORT) {
+ mode = 0;
+ } else {
+ mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE);
+ if (cmd->opcode == MMC_STOP_TRANSMISSION ||
+ cmd->opcode == MMC_ERASE)
+ mode |= SDHCI_UHS2_TRNS_WAIT_EBSY;
+ else {
+ /* send status mode */
+ if (cmd->opcode == MMC_SEND_STATUS)
+ mode = 0;
+ }
+ }
+#ifdef CONFIG_MMC_DEBUG
+ DBG("UHS2 no data trans mode is 0x%x.\n", mode);
+#endif
+ sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
+ return;
+ }
+
+ WARN_ON(!host->data);
+
+ mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY;
+ if (data->flags & MMC_DATA_WRITE)
+ mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT;
+
+ if (data->blocks == 1 &&
+ data->blksz != 512 &&
+ cmd->opcode != MMC_READ_SINGLE_BLOCK &&
+ cmd->opcode != MMC_WRITE_BLOCK) {
+ mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN;
+ mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE;
+ }
+
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ mode |= SDHCI_UHS2_TRNS_DMA;
+
+ if ((host->mmc->flags & MMC_UHS2_2L_HD) && !cmd->uhs2_tmode0_flag)
+ mode |= SDHCI_UHS2_TRNS_2L_HD;
+
+ sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
+
+#ifdef CONFIG_MMC_DEBUG
+ DBG("UHS2 trans mode is 0x%x.\n", mode);
+#endif
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_set_transfer_mode);
+
+void sdhci_uhs2_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ int i, j;
+ int cmd_reg;
+
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED) {
+ if (cmd->uhs2_cmd == NULL) {
+ pr_err("%s: fatal error, no uhs2_cmd!\n",
+ mmc_hostname(host->mmc));
+ return;
+ }
+ }
+
+ i = 0;
+ sdhci_writel(host,
+ ((u32)cmd->uhs2_cmd->arg << 16) | (u32)cmd->uhs2_cmd->header,
+ SDHCI_UHS2_CMD_PACKET + i);
+ i += 4;
+
+ /*
+ * Per spec, playload (config) should be MSB before sending out.
+ * But we don't need convert here because had set payload as
+ * MSB when preparing config read/write commands.
+ */
+ for (j = 0; j < cmd->uhs2_cmd->payload_len/sizeof(u32); j++) {
+ sdhci_writel(host, *(cmd->uhs2_cmd->payload + j),
+ SDHCI_UHS2_CMD_PACKET + i);
+ i += 4;
+ }
+
+ for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4)
+ sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET+i);
+
+#ifdef CONFIG_MMC_DEBUG
+ DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len);
+ for (i = 0; i < cmd->uhs2_cmd->packet_len; i++)
+ DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i,
+ sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i));
+#endif
+
+ cmd_reg = cmd->uhs2_cmd->packet_len <<
+ SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT;
+ if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
+ cmd_reg |= SDHCI_UHS2_COMMAND_DATA;
+ if (cmd->opcode == MMC_STOP_TRANSMISSION)
+ cmd_reg |= SDHCI_UHS2_COMMAND_CMD12;
+
+ /* UHS2 Native ABORT */
+ if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
+ ((((cmd->uhs2_cmd->arg & 0xF) << 8) |
+ ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == UHS2_DEV_CMD_TRANS_ABORT))
+ cmd_reg |= SDHCI_UHS2_COMMAND_TRNS_ABORT;
+
+ /* UHS2 Native DORMANT */
+ if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
+ ((((cmd->uhs2_cmd->arg & 0xF) << 8) |
+ ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) ==
+ UHS2_DEV_CMD_GO_DORMANT_STATE))
+ cmd_reg |= SDHCI_UHS2_COMMAND_DORMANT;
+
+ DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg);
+
+ sdhci_writew(host, cmd_reg, SDHCI_UHS2_COMMAND);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_send_command);
+
+void sdhci_uhs2_finish_command(struct sdhci_host *host)
+{
+ int i;
+ bool bReadA0 = 0;
+
+ if (host->mmc->flags & MMC_UHS2_INITIALIZED) {
+ u8 resp;
+ u8 ecode;
+
+ resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2);
+ if (resp & UHS2_RES_NACK_MASK) {
+ ecode = (resp >> UHS2_RES_ECODE_POS) &
+ UHS2_RES_ECODE_MASK;
+ pr_err("%s: NACK is got, ECODE=0x%x.\n",
+ mmc_hostname(host->mmc), ecode);
+ }
+ bReadA0 = 1;
+ }
+
+ if (host->cmd->uhs2_resp &&
+ host->cmd->uhs2_resp_len &&
+ host->cmd->uhs2_resp_len <= 20) {
+ /* Get whole response of some native CCMD, like
+ * DEVICE_INIT, ENUMERATE.
+ */
+ for (i = 0; i < host->cmd->uhs2_resp_len; i++)
+ host->cmd->uhs2_resp[i] = sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i);
+ } else {
+ /* Get SD CMD response and Payload for some read
+ * CCMD, like INQUIRY_CFG.
+ */
+ /* Per spec (p136), payload field is divided into
+ * a unit of DWORD and transmission order within
+ * a DWORD is big endian.
+ */
+ if (!bReadA0)
+ sdhci_readl(host, SDHCI_UHS2_RESPONSE);
+ for (i = 4; i < 20; i += 4) {
+ host->cmd->resp[i/4-1] = (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i) << 24) |
+ (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i + 1) << 16) |
+ (sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i + 2) << 8) |
+ sdhci_readb(host,
+ SDHCI_UHS2_RESPONSE + i + 3);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_finish_command);
+
+void sdhci_uhs2_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
+{
+ u8 cmd_res, dead_lock;
+ u16 ctrl_2;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* UHS2 Timeout Control */
+ sdhci_calc_timeout_uhs2(host, &cmd_res, &dead_lock);
+
+ /* change to use calculate value */
+ cmd_res |= dead_lock << SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT;
+
+ sdhci_uhs2_clear_set_irqs(host,
+ SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT|
+ SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT,
+ 0);
+ sdhci_writeb(host, cmd_res, SDHCI_UHS2_TIMER_CTRL);
+ sdhci_uhs2_clear_set_irqs(host, 0,
+ SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT|
+ SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT);
+
+ /* UHS2 timing */
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (ios->timing == MMC_TIMING_UHS2)
+ ctrl_2 |= SDHCI_CTRL_UHS_2 | SDHCI_CTRL_UHS2_INTERFACE_EN;
+ else
+ ctrl_2 &= ~(SDHCI_CTRL_UHS_2 | SDHCI_CTRL_UHS2_INTERFACE_EN);
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+
+ if (!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
+ sdhci_enable_preset_value(host, true);
+
+ /* Set VDD2 */
+ ios->vdd = fls(host->mmc->ocr_avail) - 1;
+ ios->vdd2 = fls(host->mmc->ocr_avail_uhs2) - 1;
+
+ sdhci_set_power(host, ios->power_mode, ios->vdd, ios->vdd2);
+ udelay(100);
+
+ host->timing = ios->timing;
+ sdhci_set_clock(host, host->clock);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_do_set_ios);
+
+static int sdhci_uhs2_interface_detect(struct sdhci_host *host)
+{
+ int timeout = 100;
+
+ udelay(200); /* wait for 200us before check */
+
+ while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_UHS2_IF_DETECT)) {
+ if (timeout == 0) {
+ pr_warn("%s: not detect UHS2 interface in 200us.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return -EIO;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ /* Enable UHS2 error interrupts */
+ sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
+ SDHCI_UHS2_ERR_INT_STATUS_MASK);
+
+ timeout = 150;
+ while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_UHS2_LANE_SYNC)) {
+ if (timeout == 0) {
+ pr_warn("%s: UHS2 Lane sync fail in 150ms.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return -EIO;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ DBG("%s: UHS2 Lane synchronized in UHS2 mode, PHY is initializaed.\n",
+ mmc_hostname(host->mmc));
+ return 0;
+}
+
+static int sdhci_uhs2_init(struct sdhci_host *host)
+{
+ u16 caps_ptr = 0;
+ u32 caps_gen = 0;
+ u32 caps_phy = 0;
+ u32 caps_tran[2] = {0, 0};
+ struct mmc_host *mmc = host->mmc;
+
+ /*
+ * TODO: may add corresponding members in sdhci_host to
+ * keep these caps.
+ */
+ caps_ptr = sdhci_readw(host, SDHCI_UHS2_HOST_CAPS_PTR);
+ if (caps_ptr < 0x100 || caps_ptr > 0x1FF) {
+ pr_err("%s: SDHCI_UHS2_HOST_CAPS_PTR(%d) is wrong.\n",
+ mmc_hostname(mmc), caps_ptr);
+ return -ENODEV;
+ }
+ caps_gen = sdhci_readl(host,
+ caps_ptr + SDHCI_UHS2_HOST_CAPS_GEN_OFFSET);
+ caps_phy = sdhci_readl(host,
+ caps_ptr + SDHCI_UHS2_HOST_CAPS_PHY_OFFSET);
+ caps_tran[0] = sdhci_readl(host,
+ caps_ptr + SDHCI_UHS2_HOST_CAPS_TRAN_OFFSET);
+ caps_tran[1] = sdhci_readl(host,
+ caps_ptr + SDHCI_UHS2_HOST_CAPS_TRAN_1_OFFSET);
+
+ /* Geneneral Caps */
+ mmc->uhs2_caps.dap = caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_DAP_MASK;
+ mmc->uhs2_caps.gap = (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_GAP_MASK) >>
+ SDHCI_UHS2_HOST_CAPS_GEN_GAP_SHIFT;
+ mmc->uhs2_caps.n_lanes = (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_LANE_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_GEN_LANE_SHIFT;
+ mmc->uhs2_caps.addr64 =
+ (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_ADDR_64) ? 1 : 0;
+ mmc->uhs2_caps.card_type =
+ (caps_gen & SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_MASK) >>
+ SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_SHIFT;
+
+ /* PHY Caps */
+ mmc->uhs2_caps.phy_rev = caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_REV_MASK;
+ mmc->uhs2_caps.speed_range =
+ (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_RANGE_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_PHY_RANGE_SHIFT;
+ mmc->uhs2_caps.n_lss_sync =
+ (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_SHIFT;
+ mmc->uhs2_caps.n_lss_dir =
+ (caps_phy & SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_SHIFT;
+ if (mmc->uhs2_caps.n_lss_sync == 0)
+ mmc->uhs2_caps.n_lss_sync = 16 << 2;
+ else
+ mmc->uhs2_caps.n_lss_sync <<= 2;
+ if (mmc->uhs2_caps.n_lss_dir == 0)
+ mmc->uhs2_caps.n_lss_dir = 16 << 3;
+ else
+ mmc->uhs2_caps.n_lss_dir <<= 3;
+
+ /* LINK/TRAN Caps */
+ mmc->uhs2_caps.link_rev =
+ caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_LINK_REV_MASK;
+ mmc->uhs2_caps.n_fcu =
+ (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_SHIFT;
+ if (mmc->uhs2_caps.n_fcu == 0)
+ mmc->uhs2_caps.n_fcu = 256;
+ mmc->uhs2_caps.host_type =
+ (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_SHIFT;
+ mmc->uhs2_caps.maxblk_len =
+ (caps_tran[0] & SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_MASK)
+ >> SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_SHIFT;
+ mmc->uhs2_caps.n_data_gap =
+ caps_tran[1] & SDHCI_UHS2_HOST_CAPS_TRAN_1_N_DATA_GAP_MASK;
+
+ return 0;
+}
+
+int sdhci_uhs2_do_detect_init(struct sdhci_host *host)
+{
+ unsigned long flags;
+ int ret = -EIO;
+
+ DBG("%s: begin UHS2 init.\n", __func__);
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (sdhci_uhs2_interface_detect(host)) {
+ pr_warn("%s: cannot detect UHS2 interface.\n",
+ mmc_hostname(host->mmc));
+ goto out;
+ }
+
+ if (sdhci_uhs2_init(host)) {
+ pr_warn("%s: UHS2 init fail.\n",
+ mmc_hostname(host->mmc));
+ goto out;
+ }
+
+ /* Init complete, do soft reset and enable UHS2 error irqs. */
+ sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_SD);
+ sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
+ SDHCI_UHS2_ERR_INT_STATUS_MASK);
+ /*
+ * !!! SDHCI_INT_ENABLE and SDHCI_SIGNAL_ENABLE was cleared
+ * by SDHCI_UHS2_SW_RESET_SD
+ */
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
+
+ ret = 0;
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_do_detect_init);
+
+static void sdhci_uhs2_set_config(struct sdhci_host *host)
+{
+ u32 value;
+ u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SET_PTR);
+ u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0);
+ u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
+ u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8);
+ u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12);
+
+ /* Set Gen Settings */
+ sdhci_writel(host, host->mmc->uhs2_caps.n_lanes_set <<
+ SDHCI_UHS2_GEN_SET_N_LANES_POS, sdhci_uhs2_gen_set_reg);
+
+ /* Set PHY Settings */
+ value = (host->mmc->uhs2_caps.n_lss_dir_set <<
+ SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS) |
+ (host->mmc->uhs2_caps.n_lss_sync_set <<
+ SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS);
+ if (host->mmc->flags & MMC_UHS2_SPEED_B)
+ value |= 1 << SDHCI_UHS2_PHY_SET_SPEED_POS;
+ sdhci_writel(host, value, sdhci_uhs2_phy_set_reg);
+
+ /* Set LINK-TRAN Settings */
+ value = (host->mmc->uhs2_caps.max_retry_set <<
+ SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS) |
+ (host->mmc->uhs2_caps.n_fcu_set <<
+ SDHCI_UHS2_TRAN_SET_N_FCU_POS);
+ sdhci_writel(host, value, sdhci_uhs2_tran_set_reg);
+ sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set,
+ sdhci_uhs2_tran_set_1_reg);
+}
+
+static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
+{
+ int timeout = 100;
+
+ while (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_UHS2_IN_DORMANT_STATE)) {
+ if (timeout == 0) {
+ pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n",
+ mmc_hostname(host->mmc));
+ sdhci_dumpregs(host);
+ return -EIO;
+ }
+ timeout--;
+ mdelay(1);
+ }
+ return 0;
+}
+
+int sdhci_uhs2_do_set_reg(struct sdhci_host *host, enum uhs2_act act)
+{
+ unsigned long flags;
+ int err = 0;
+ u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SET_PTR);
+ u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
+
+ DBG("Begin sdhci_uhs2_set_reg, act %d.\n", act);
+ spin_lock_irqsave(&host->lock, flags);
+
+ switch (act) {
+ case SET_CONFIG:
+ sdhci_uhs2_set_config(host);
+ break;
+ case ENABLE_INT:
+ sdhci_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
+ break;
+ case DISABLE_INT:
+ sdhci_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
+ break;
+ case SET_SPEED_B:
+ sdhci_writeb(host, 1 << SDHCI_UHS2_PHY_SET_SPEED_POS,
+ sdhci_uhs2_phy_set_reg);
+ break;
+ case CHECK_DORMANT:
+ err = sdhci_uhs2_check_dormant(host);
+ break;
+ default:
+ pr_err("%s: input action %d is wrong!\n",
+ mmc_hostname(host->mmc), act);
+ err = -EIO;
+ break;
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ return err;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_do_set_reg);
+
+void sdhci_uhs2_irq(struct sdhci_host *host)
+{
+ u32 uhs2mask;
+ struct mmc_command *cmd = host->cmd;
+
+ uhs2mask = sdhci_readl(host, SDHCI_UHS2_ERR_INT_STATUS);
+ DBG("*** %s got UHS2 interrupt: 0x%08x\n",
+ mmc_hostname(host->mmc), uhs2mask);
+
+ sdhci_writel(host, uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_MASK,
+ SDHCI_UHS2_ERR_INT_STATUS);
+
+ if (!(uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_MASK))
+ return;
+
+ if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_CMD_MASK) {
+ if (!host->cmd) {
+ pr_err("%s: Got cmd interrupt 0x%08x but no cmd.\n",
+ mmc_hostname(host->mmc),
+ (unsigned int)uhs2mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+ host->cmd->error = -EILSEQ;
+ if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT)
+ host->cmd->error = -ETIMEDOUT;
+ }
+
+ if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_DATA_MASK) {
+ if (!host->data) {
+ pr_err("%s: Got data interrupt 0x%08x but no data.\n",
+ mmc_hostname(host->mmc),
+ (unsigned int)uhs2mask);
+ sdhci_dumpregs(host);
+ return;
+ }
+
+ if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT) {
+ pr_err("%s: Got deadlock timeout interrupt 0x%08x\n",
+ mmc_hostname(host->mmc),
+ (unsigned int)uhs2mask);
+ host->data->error = -ETIMEDOUT;
+ } else if (uhs2mask & SDHCI_UHS2_ERR_INT_STATUS_ADMA) {
+ pr_err("%s: ADMA error = 0x %x\n",
+ mmc_hostname(host->mmc),
+ sdhci_readb(host, SDHCI_ADMA_ERROR));
+ host->data->error = -EIO;
+ } else
+ host->data->error = -EILSEQ;
+ }
+
+ if (host->data && host->data->error)
+ sdhci_finish_data(host);
+ else
+ sdhci_finish_mrq(host, cmd->mrq);
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_irq);
+
+int sdhci_uhs2_add_host(struct sdhci_host *host, u32 caps1)
+{
+ struct mmc_host *mmc;
+ u32 max_current_caps2;
+
+ if (host->version < SDHCI_SPEC_400)
+ return 0;
+
+ mmc = host->mmc;
+
+ /* Support UHS2 */
+ if (caps1 & SDHCI_SUPPORT_UHS2) {
+ mmc->caps |= MMC_CAP_UHS2;
+ mmc->flags |= MMC_UHS2_SUPPORT;
+ }
+
+ max_current_caps2 = sdhci_readl(host, SDHCI_MAX_CURRENT_1);
+
+ if ((caps1 & SDHCI_SUPPORT_VDD2_180) &&
+ !max_current_caps2 &&
+ !IS_ERR(mmc->supply.vmmc2)) {
+ /* UHS2 - VDD2 */
+ int curr = regulator_get_current_limit(mmc->supply.vmmc2);
+
+ if (curr > 0) {
+ /* convert to SDHCI_MAX_CURRENT format */
+ curr = curr/1000; /* convert to mA */
+ curr = curr/SDHCI_MAX_CURRENT_MULTIPLIER;
+ curr = min_t(u32, curr,
+ SDHCI_MAX_CURRENT_LIMIT);
+ max_current_caps2 = curr;
+ }
+ }
+
+ if (caps1 & SDHCI_SUPPORT_VDD2_180) {
+ mmc->ocr_avail_uhs2 |= MMC_VDD2_165_195;
+ /*
+ * UHS2 doesn't require this. Only UHS-I bus needs to set
+ * max current.
+ */
+ mmc->max_current_180_vdd2 = (max_current_caps2 &
+ SDHCI_MAX_CURRENT_VDD2_180_MASK) *
+ SDHCI_MAX_CURRENT_MULTIPLIER;
+ } else {
+ mmc->caps &= ~MMC_CAP_UHS2;
+ mmc->flags &= ~MMC_UHS2_SUPPORT;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_add_host);
+
+void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead)
+{
+ if (!(host->mmc) || !(host->mmc->flags & MMC_UHS2_SUPPORT))
+ return;
+
+ if (!dead)
+ sdhci_uhs2_reset(host, SDHCI_UHS2_SW_RESET_FULL);
+
+ sdhci_writel(host, 0, SDHCI_UHS2_ERR_INT_STATUS_EN);
+ sdhci_writel(host, 0, SDHCI_UHS2_ERR_INT_SIG_EN);
+ host->mmc->flags &= ~MMC_UHS2_SUPPORT;
+ host->mmc->flags &= ~MMC_UHS2_INITIALIZED;
+}
+EXPORT_SYMBOL_GPL(sdhci_uhs2_remove_host);
diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h
new file mode 100644
index 000000000000..1a17c81a3533
--- /dev/null
+++ b/drivers/mmc/host/sdhci-uhs2.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * linux/drivers/mmc/host/sdhci-uhs2.h - Secure Digital Host Controller
+ * Interface driver
+ *
+ * Header file for Host Controller UHS2 related registers and I/O accessors.
+ *
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ */
+#ifndef __SDHCI_UHS2_H
+#define __SDHCI_UHS2_H
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/uhs2.h>
+
+extern void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask);
+extern void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host,
+ struct mmc_command *cmd);
+extern void sdhci_uhs2_send_command(struct sdhci_host *host,
+ struct mmc_command *cmd);
+extern void sdhci_uhs2_finish_command(struct sdhci_host *host);
+extern void sdhci_uhs2_do_set_ios(struct sdhci_host *host,
+ struct mmc_ios *ios);
+extern int sdhci_uhs2_do_detect_init(struct sdhci_host *host);
+extern int sdhci_uhs2_do_set_reg(struct sdhci_host *host, enum uhs2_act act);
+extern void sdhci_uhs2_irq(struct sdhci_host *host);
+extern int sdhci_uhs2_add_host(struct sdhci_host *host, u32 caps1);
+extern void sdhci_uhs2_remove_host(struct sdhci_host *host, int dead);
+extern void sdhci_uhs2_clear_set_irqs(struct sdhci_host *host, u32 clear,
+ u32 set);
+extern void sdhci_uhs2_set_timeout(struct sdhci_host *host);
+
+#endif /* __SDHCI_UHS2_H */
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 1dea1ba66f7b..328860cf2bc3 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -214,12 +214,12 @@ static void xenon_set_uhs_signaling(struct sdhci_host *host,
}
static void xenon_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
u8 pwr = host->pwr;
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
if (host->pwr == pwr)
return;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index fe83ece6965b..2f7732f4bb75 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -42,8 +42,28 @@
#define SDHCI_TRNS_READ 0x10
#define SDHCI_TRNS_MULTI 0x20
+/*
+ * Defined in Host Version 4.10.
+ * 1 - R5 (SDIO)
+ * 0 - R1 (Memory)
+ */
+#define SDHCI_TRNS_RES_TYPE 0x40
+#define SDHCI_TRNS_RES_ERR_CHECK 0x80
+#define SDHCI_TRNS_RES_INT_DIS 0x0100
+
+
#define SDHCI_COMMAND 0x0E
#define SDHCI_CMD_RESP_MASK 0x03
+
+/*
+ * Host Version 4.10 adds this bit to distinguish a main command or
+ * sub command.
+ * CMD53(SDIO) - main command
+ * CMD52(SDIO) - sub command which doesn't have data block or doesn't
+ * indicate busy.
+ */
+#define SDHCI_CMD_SUB_CMD 0x04
+
#define SDHCI_CMD_CRC 0x08
#define SDHCI_CMD_INDEX 0x10
#define SDHCI_CMD_DATA 0x20
@@ -59,11 +79,19 @@
#define SDHCI_RESPONSE 0x10
+#define SDHCI_RESPONSE_CM_TRAN_ABORT_OFFSET 0x10
+#define SDHCI_RESPONSE_CM_TRAN_ABORT_SIZE 4
+#define SDHCI_RESPONSE_SD_TRAN_ABORT_OFFSET 0x18
+#define SDHCI_RESPONSE_SD_TRAN_ABORT_SIZE 8
+
#define SDHCI_BUFFER 0x20
#define SDHCI_PRESENT_STATE 0x24
#define SDHCI_CMD_INHIBIT 0x00000001
#define SDHCI_DATA_INHIBIT 0x00000002
+
+#define SDHCI_DATA_HIGH_LVL_MASK 0x000000F0
+
#define SDHCI_DOING_WRITE 0x00000100
#define SDHCI_DOING_READ 0x00000200
#define SDHCI_SPACE_AVAILABLE 0x00000400
@@ -79,6 +107,13 @@
#define SDHCI_DATA_0_LVL_MASK 0x00100000
#define SDHCI_CMD_LVL 0x01000000
+#define SDHCI_HOST_REGULATOR_STABLE 0x02000000
+#define SDHCI_CMD_NOT_ISSUE_ERR 0x08000000
+#define SDHCI_SUB_CMD_STATUS 0x10000000
+#define SDHCI_UHS2_IN_DORMANT_STATE 0x20000000
+#define SDHCI_UHS2_LANE_SYNC 0x40000000
+#define SDHCI_UHS2_IF_DETECT 0x80000000
+
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
#define SDHCI_CTRL_4BITBUS 0x02
@@ -99,6 +134,11 @@
#define SDHCI_POWER_300 0x0C
#define SDHCI_POWER_330 0x0E
+/* VDD2 - UHS2 */
+#define SDHCI_VDD2_POWER_ON 0x10
+#define SDHCI_VDD2_POWER_180 0xA0
+#define SDHCI_VDD2_POWER_120 0x80
+
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
#define SDHCI_WAKE_UP_CONTROL 0x2B
@@ -109,7 +149,7 @@
#define SDHCI_CLOCK_CONTROL 0x2C
#define SDHCI_DIVIDER_SHIFT 8
#define SDHCI_DIVIDER_HI_SHIFT 6
-#define SDHCI_DIV_MASK 0xFF
+#define SDHCI_DIV_MASK 0xFF
#define SDHCI_DIV_MASK_LEN 8
#define SDHCI_DIV_HI_MASK 0x300
#define SDHCI_PROG_CLOCK_MODE 0x0020
@@ -138,6 +178,10 @@
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
#define SDHCI_INT_RETUNE 0x00001000
+
+/* Host Version 4.10 */
+#define SDHCI_INT_FX_EVENT 0x00002000
+
#define SDHCI_INT_CQE 0x00004000
#define SDHCI_INT_ERROR 0x00008000
#define SDHCI_INT_TIMEOUT 0x00010000
@@ -151,6 +195,9 @@
#define SDHCI_INT_AUTO_CMD_ERR 0x01000000
#define SDHCI_INT_ADMA_ERROR 0x02000000
+/* Host Version 4.0 */
+#define SDHCI_INT_RESPONSE_ERROR 0x08000000
+
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
@@ -177,6 +224,9 @@
#define SDHCI_AUTO_CMD_END_BIT 0x00000008
#define SDHCI_AUTO_CMD_INDEX 0x00000010
+/* Host Version 4.10 */
+#define SDHCI_ACMD_RESPONSE_ERROR 0x0020
+
#define SDHCI_HOST_CONTROL2 0x3E
#define SDHCI_CTRL_UHS_MASK 0x0007
#define SDHCI_CTRL_UHS_SDR12 0x0000
@@ -185,6 +235,7 @@
#define SDHCI_CTRL_UHS_SDR104 0x0003
#define SDHCI_CTRL_UHS_DDR50 0x0004
#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
+#define SDHCI_CTRL_UHS_2 0x0007 /* UHS-2 */
#define SDHCI_CTRL_VDD_180 0x0008
#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
#define SDHCI_CTRL_DRV_TYPE_B 0x0000
@@ -193,9 +244,12 @@
#define SDHCI_CTRL_DRV_TYPE_D 0x0030
#define SDHCI_CTRL_EXEC_TUNING 0x0040
#define SDHCI_CTRL_TUNED_CLK 0x0080
+#define SDHCI_CTRL_UHS2_INTERFACE_EN 0x0100 /* UHS-2 */
+#define SDHCI_CTRL_ADMA2_LEN_MODE 0x0400
#define SDHCI_CMD23_ENABLE 0x0800
#define SDHCI_CTRL_V4_MODE 0x1000
#define SDHCI_CTRL_64BIT_ADDR 0x2000
+#define SDHCI_CTRL_ASYNC_INT_EN 0x4000
#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
@@ -218,10 +272,12 @@
#define SDHCI_CAN_VDD_180 0x04000000
#define SDHCI_CAN_64BIT_V4 0x08000000
#define SDHCI_CAN_64BIT 0x10000000
+#define SDHCI_CAN_ASYNC_INT 0x20000000
#define SDHCI_SUPPORT_SDR50 0x00000001
#define SDHCI_SUPPORT_SDR104 0x00000002
#define SDHCI_SUPPORT_DDR50 0x00000004
+#define SDHCI_SUPPORT_UHS2 0x00000008 /* UHS-2 support */
#define SDHCI_DRIVER_TYPE_A 0x00000010
#define SDHCI_DRIVER_TYPE_C 0x00000020
#define SDHCI_DRIVER_TYPE_D 0x00000040
@@ -233,11 +289,14 @@
#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
#define SDHCI_CLOCK_MUL_SHIFT 16
#define SDHCI_CAN_DO_ADMA3 0x08000000
+#define SDHCI_SUPPORT_VDD2_180 0x10000000 /* UHS-2 1.8V VDD2 */
+#define SDHCI_RSVD_FOR_VDD2 0x20000000 /* Rsvd for future VDD2 */
#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
#define SDHCI_CAPABILITIES_1 0x44
#define SDHCI_MAX_CURRENT 0x48
+#define SDHCI_MAX_CURRENT_1 0x4C
#define SDHCI_MAX_CURRENT_LIMIT 0xFF
#define SDHCI_MAX_CURRENT_330_MASK 0x0000FF
#define SDHCI_MAX_CURRENT_330_SHIFT 0
@@ -245,12 +304,18 @@
#define SDHCI_MAX_CURRENT_300_SHIFT 8
#define SDHCI_MAX_CURRENT_180_MASK 0xFF0000
#define SDHCI_MAX_CURRENT_180_SHIFT 16
-#define SDHCI_MAX_CURRENT_MULTIPLIER 4
+#define SDHCI_MAX_CURRENT_VDD2_180_MASK 0x0000000FF /* UHS2 */
+#define SDHCI_MAX_CURRENT_MULTIPLIER 4
/* 4C-4F reserved for more max current */
#define SDHCI_SET_ACMD12_ERROR 0x50
+/* Host Version 4.10 */
+#define SDHCI_SET_ACMD_RESPONSE_ERROR 0x20
#define SDHCI_SET_INT_ERROR 0x52
+/* Host Version 4.10 */
+#define SDHCI_SET_INT_TUNING_ERROR 0x0400
+#define SDHCI_SET_INT_RESPONSE_ERROR 0x0800
#define SDHCI_ADMA_ERROR 0x54
@@ -267,6 +332,11 @@
#define SDHCI_PRESET_FOR_SDR104 0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
+
+/* TODO: 0x74 is used for UHS2 in 4.10. How about HS400? */
+/* UHS2 */
+#define SDHCI_PRESET_FOR_UHS2 0x74
+
#define SDHCI_PRESET_DRV_MASK 0xC000
#define SDHCI_PRESET_DRV_SHIFT 14
#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
@@ -274,6 +344,195 @@
#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
+#define SDHCI_ADMA3_ADDRESS 0x78
+
+/* UHS-II */
+#define SDHCI_UHS2_BLOCK_SIZE 0x80
+#define SDHCI_UHS2_MAKE_BLKSZ(dma, blksz) \
+ (((dma & 0x7) << 12) | (blksz & 0xFFF))
+
+#define SDHCI_UHS2_BLOCK_COUNT 0x84
+
+#define SDHCI_UHS2_CMD_PACKET 0x88
+#define SDHCI_UHS2_CMD_PACK_MAX_LEN 20
+
+#define SDHCI_UHS2_TRANS_MODE 0x9C
+#define SDHCI_UHS2_TRNS_DMA 0x0001
+#define SDHCI_UHS2_TRNS_BLK_CNT_EN 0x0002
+#define SDHCI_UHS2_TRNS_DATA_TRNS_WRT 0x0010
+#define SDHCI_UHS2_TRNS_BLK_BYTE_MODE 0x0020
+#define SDHCI_UHS2_TRNS_RES_R5 0x0040
+#define SDHCI_UHS2_TRNS_RES_ERR_CHECK_EN 0x0080
+#define SDHCI_UHS2_TRNS_RES_INT_DIS 0x0100
+#define SDHCI_UHS2_TRNS_WAIT_EBSY 0x4000
+#define SDHCI_UHS2_TRNS_2L_HD 0x8000
+
+#define SDHCI_UHS2_COMMAND 0x9E
+#define SDHCI_UHS2_COMMAND_SUB_CMD 0x0004
+#define SDHCI_UHS2_COMMAND_DATA 0x0020
+#define SDHCI_UHS2_COMMAND_TRNS_ABORT 0x0040
+#define SDHCI_UHS2_COMMAND_CMD12 0x0080
+#define SDHCI_UHS2_COMMAND_DORMANT 0x00C0
+#define SDHCI_UHS2_COMMAND_PACK_LEN_MASK 0x1F00
+#define SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT 8
+
+#define SDHCI_UHS2_RESPONSE 0xA0
+#define SDHCI_UHS2_RESPONSE_MAX_LEN 20
+
+#define SDHCI_UHS2_MSG_SELECT 0xB4
+#define SDHCI_UHS2_MSG_SELECT_CURR 0x0
+#define SDHCI_UHS2_MSG_SELECT_ONE 0x1
+#define SDHCI_UHS2_MSG_SELECT_TWO 0x2
+#define SDHCI_UHS2_MSG_SELECT_THREE 0x3
+
+#define SDHCI_UHS2_MSG 0xB8
+
+#define SDHCI_UHS2_DEV_INT_STATUS 0xBC
+
+#define SDHCI_UHS2_DEV_SELECT 0xBE
+#define SDHCI_UHS2_DEV_SELECT_DEV_SEL_MASK 0x0F
+#define SDHCI_UHS2_DEV_SELECT_INT_MSG_EN 0x80
+
+#define SDHCI_UHS2_DEV_INT_CODE 0xBF
+
+#define SDHCI_UHS2_SW_RESET 0xC0
+#define SDHCI_UHS2_SW_RESET_FULL 0x0001
+#define SDHCI_UHS2_SW_RESET_SD 0x0002
+
+#define SDHCI_UHS2_TIMER_CTRL 0xC2
+#define SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT 4
+
+#define SDHCI_UHS2_ERR_INT_STATUS 0xC4
+#define SDHCI_UHS2_ERR_INT_STATUS_EN 0xC8
+#define SDHCI_UHS2_ERR_INT_SIG_EN 0xCC
+#define SDHCI_UHS2_ERR_INT_STATUS_HEADER 0x00000001
+#define SDHCI_UHS2_ERR_INT_STATUS_RES 0x00000002
+#define SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP 0x00000004
+#define SDHCI_UHS2_ERR_INT_STATUS_CRC 0x00000008
+#define SDHCI_UHS2_ERR_INT_STATUS_FRAME 0x00000010
+#define SDHCI_UHS2_ERR_INT_STATUS_TID 0x00000020
+#define SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER 0x00000080
+#define SDHCI_UHS2_ERR_INT_STATUS_EBUSY 0x00000100
+#define SDHCI_UHS2_ERR_INT_STATUS_ADMA 0x00008000
+#define SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT 0x00010000
+#define SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT 0x00020000
+#define SDHCI_UHS2_ERR_INT_STATUS_VENDOR 0x08000000
+#define SDHCI_UHS2_ERR_INT_STATUS_MASK \
+ (SDHCI_UHS2_ERR_INT_STATUS_HEADER | \
+ SDHCI_UHS2_ERR_INT_STATUS_RES | \
+ SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP | \
+ SDHCI_UHS2_ERR_INT_STATUS_CRC | \
+ SDHCI_UHS2_ERR_INT_STATUS_FRAME | \
+ SDHCI_UHS2_ERR_INT_STATUS_TID | \
+ SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER | \
+ SDHCI_UHS2_ERR_INT_STATUS_EBUSY | \
+ SDHCI_UHS2_ERR_INT_STATUS_ADMA | \
+ SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT | \
+ SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT)
+#define SDHCI_UHS2_ERR_INT_STATUS_CMD_MASK \
+ (SDHCI_UHS2_ERR_INT_STATUS_HEADER | \
+ SDHCI_UHS2_ERR_INT_STATUS_RES | \
+ SDHCI_UHS2_ERR_INT_STATUS_FRAME | \
+ SDHCI_UHS2_ERR_INT_STATUS_TID | \
+ SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT)
+/* CRC Error occurs during a packet receiving */
+#define SDHCI_UHS2_ERR_INT_STATUS_DATA_MASK \
+ (SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP | \
+ SDHCI_UHS2_ERR_INT_STATUS_CRC | \
+ SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER | \
+ SDHCI_UHS2_ERR_INT_STATUS_EBUSY | \
+ SDHCI_UHS2_ERR_INT_STATUS_ADMA | \
+ SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT)
+
+#define SDHCI_UHS2_SET_PTR 0xE0
+#define SDHCI_UHS2_GEN_SET_POWER_LOW 0x0001
+#define SDHCI_UHS2_GEN_SET_N_LANES_POS 8
+#define SDHCI_UHS2_GEN_SET_2L_FD_HD 0x0
+#define SDHCI_UHS2_GEN_SET_2D1U_FD 0x2
+#define SDHCI_UHS2_GEN_SET_1D2U_FD 0x3
+#define SDHCI_UHS2_GEN_SET_2D2U_FD 0x4
+
+#define SDHCI_UHS2_PHY_SET_SPEED_POS 6
+#define SDHCI_UHS2_PHY_SET_HIBER_EN 0x00008000
+#define SDHCI_UHS2_PHY_SET_N_LSS_SYN_MASK 0x000F0000
+#define SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS 16
+#define SDHCI_UHS2_PHY_SET_N_LSS_DIR_MASK 0x00F00000
+#define SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS 20
+
+#define SDHCI_UHS2_TRAN_SET_N_FCU_MASK 0x0000FF00
+#define SDHCI_UHS2_TRAN_SET_N_FCU_POS 8
+#define SDHCI_UHS2_TRAN_SET_RETRY_CNT_MASK 0x00030000
+#define SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS 16
+
+#define SDHCI_UHS2_TRAN_SET_1_N_DAT_GAP_MASK 0x000000FF
+
+#define SDHCI_UHS2_HOST_CAPS_PTR 0xE2
+#define SDHCI_UHS2_HOST_CAPS_GEN_OFFSET 0
+#define SDHCI_UHS2_HOST_CAPS_GEN_DAP_MASK 0x0000000F
+#define SDHCI_UHS2_HOST_CAPS_GEN_GAP_MASK 0x000000F0
+#define SDHCI_UHS2_HOST_CAPS_GEN_GAP(gap) (gap * 360)
+#define SDHCI_UHS2_HOST_CAPS_GEN_GAP_SHIFT 4
+#define SDHCI_UHS2_HOST_CAPS_GEN_LANE_MASK 0x00003F00
+#define SDHCI_UHS2_HOST_CAPS_GEN_LANE_SHIFT 8
+#define SDHCI_UHS2_HOST_CAPS_GEN_2L_HD_FD 1
+#define SDHCI_UHS2_HOST_CAPS_GEN_2D1U_FD 2
+#define SDHCI_UHS2_HOST_CAPS_GEN_1D2U_FD 4
+#define SDHCI_UHS2_HOST_CAPS_GEN_2D2U_FD 8
+#define SDHCI_UHS2_HOST_CAPS_GEN_ADDR_64 0x00004000
+#define SDHCI_UHS2_HOST_CAPS_GEN_BOOT 0x00008000
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_MASK 0x00030000
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_SHIFT 16
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_RMV 0
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_EMB 1
+#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_EMB_RMV 2
+#define SDHCI_UHS2_HOST_CAPS_GEN_NUM_DEV_MASK 0x003C0000
+#define SDHCI_UHS2_HOST_CAPS_GEN_NUM_DEV_SHIFT 18
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_MASK 0x00C00000
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_SHIFT 22
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_P2P 0
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_RING 1
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_HUB 2
+#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_HUB_RING 3
+
+#define SDHCI_UHS2_HOST_CAPS_PHY_OFFSET 4
+#define SDHCI_UHS2_HOST_CAPS_PHY_REV_MASK 0x0000003F
+#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_MASK 0x000000C0
+#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_SHIFT 6
+#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_A 0
+#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_B 1
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_MASK 0x000F0000
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_SHIFT 16
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_MASK 0x00F00000
+#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_SHIFT 20
+#define SDHCI_UHS2_HOST_CAPS_TRAN_OFFSET 8
+#define SDHCI_UHS2_HOST_CAPS_TRAN_LINK_REV_MASK 0x0000003F
+#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_MASK 0x0000FF00
+#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_SHIFT 8
+#define SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_MASK 0x00070000
+#define SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_SHIFT 16
+#define SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_MASK 0xFFF00000
+#define SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_SHIFT 20
+
+#define SDHCI_UHS2_HOST_CAPS_TRAN_1_OFFSET 12
+#define SDHCI_UHS2_HOST_CAPS_TRAN_1_N_DATA_GAP_MASK 0x000000FF
+
+#define SDHCI_UHS2_TEST_PTR 0xE4
+#define SDHCI_UHS2_TEST_ERR_HEADER 0x00000001
+#define SDHCI_UHS2_TEST_ERR_RES 0x00000002
+#define SDHCI_UHS2_TEST_ERR_RETRY_EXP 0x00000004
+#define SDHCI_UHS2_TEST_ERR_CRC 0x00000008
+#define SDHCI_UHS2_TEST_ERR_FRAME 0x00000010
+#define SDHCI_UHS2_TEST_ERR_TID 0x00000020
+#define SDHCI_UHS2_TEST_ERR_UNRECOVER 0x00000080
+#define SDHCI_UHS2_TEST_ERR_EBUSY 0x00000100
+#define SDHCI_UHS2_TEST_ERR_ADMA 0x00008000
+#define SDHCI_UHS2_TEST_ERR_RES_TIMEOUT 0x00010000
+#define SDHCI_UHS2_TEST_ERR_DEADLOCK_TIMEOUT 0x00020000
+#define SDHCI_UHS2_TEST_ERR_VENDOR 0x08000000
+
+#define SDHCI_UHS2_EMBED_CTRL 0xE6
+#define SDHCI_UHS2_VENDOR 0xE8
+
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
@@ -519,6 +778,7 @@ struct sdhci_host {
#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */
#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */
#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */
+#define SDHCI_USE_UHS2 (1<<17) /* Support UHS2 */
unsigned int version; /* SDHCI spec. version */
@@ -620,7 +880,7 @@ struct sdhci_ops {
void (*set_clock)(struct sdhci_host *host, unsigned int clock);
void (*set_power)(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd);
+ unsigned short vdd, unsigned short vdd2);
u32 (*irq)(struct sdhci_host *host, u32 intmask);
@@ -759,10 +1019,6 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
unsigned int *actual_clock);
void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
-void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd);
-void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd);
void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
void sdhci_set_bus_width(struct sdhci_host *host, int width);
void sdhci_reset(struct sdhci_host *host, u8 mask);
@@ -782,6 +1038,20 @@ int sdhci_runtime_suspend_host(struct sdhci_host *host);
int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset);
#endif
+/* sdhci_uhs2.c needed */
+extern void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
+extern void sdhci_dumpregs(struct sdhci_host *host);
+extern void sdhci_finish_data(struct sdhci_host *host);
+extern void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd, unsigned short vdd2);
+extern void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd, unsigned short vdd2);
+extern void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
+
+extern void sdhci_uhs2_disable_clk(struct mmc_host *mmc);
+extern void sdhci_uhs2_enable_clk(struct mmc_host *mmc);
+extern void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
+
void sdhci_cqe_enable(struct mmc_host *mmc);
void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery);
bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index b8e897e31e2e..524a342ae3cd 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -209,14 +209,14 @@ static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host,
}
static void sdhci_am654_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
if (!IS_ERR(host->mmc->supply.vmmc)) {
struct mmc_host *mmc = host->mmc;
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
}
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
}
static void sdhci_am654_write_b(struct sdhci_host *host, u8 val, int reg)
diff --git a/include/linux/mmc/uhs2.h b/include/linux/mmc/uhs2.h
new file mode 100644
index 000000000000..c61670e3cc06
--- /dev/null
+++ b/include/linux/mmc/uhs2.h
@@ -0,0 +1,270 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * linux/drivers/mmc/host/uhs2.h - UHS-II driver
+ *
+ * Header file for UHS-II packets, Host Controller registers and I/O
+ * accessors.
+ *
+ * Copyright (C) 2014 Intel Corp, All Rights Reserved.
+ */
+#ifndef LINUX_MMC_UHS2_H
+#define LINUX_MMC_UHS2_H
+
+struct mmc_request;
+
+/* LINK Layer definition */
+/* UHS2 Header */
+#define UHS2_NATIVE_PACKET_POS 7
+#define UHS2_NATIVE_PACKET (1 << UHS2_NATIVE_PACKET_POS)
+
+#define UHS2_PACKET_TYPE_POS 4
+#define UHS2_PACKET_TYPE_CCMD (0 << UHS2_PACKET_TYPE_POS)
+#define UHS2_PACKET_TYPE_DCMD (1 << UHS2_PACKET_TYPE_POS)
+#define UHS2_PACKET_TYPE_RES (2 << UHS2_PACKET_TYPE_POS)
+#define UHS2_PACKET_TYPE_DATA (3 << UHS2_PACKET_TYPE_POS)
+#define UHS2_PACKET_TYPE_MSG (7 << UHS2_PACKET_TYPE_POS)
+
+#define UHS2_DEST_ID_MASK 0x0F
+#define UHS2_DEST_ID 0x1
+
+#define UHS2_SRC_ID_POS 12
+#define UHS2_SRC_ID_MASK 0xF000
+
+#define UHS2_TRANS_ID_POS 8
+#define UHS2_TRANS_ID_MASK 0x0700
+
+/* UHS2 MSG */
+#define UHS2_MSG_CTG_POS 5
+#define UHS2_MSG_CTG_LMSG 0x00
+#define UHS2_MSG_CTG_INT 0x60
+#define UHS2_MSG_CTG_AMSG 0x80
+
+#define UHS2_MSG_CTG_FCREQ 0x00
+#define UHS2_MSG_CTG_FCRDY 0x01
+#define UHS2_MSG_CTG_STAT 0x02
+
+#define UHS2_MSG_CODE_POS 8
+#define UHS2_MSG_CODE_FC_UNRECOVER_ERR 0x8
+#define UHS2_MSG_CODE_STAT_UNRECOVER_ERR 0x8
+#define UHS2_MSG_CODE_STAT_RECOVER_ERR 0x1
+
+/* TRANS Layer definition */
+
+/* Native packets*/
+#define UHS2_NATIVE_CMD_RW_POS 7
+#define UHS2_NATIVE_CMD_WRITE (1 << UHS2_NATIVE_CMD_RW_POS)
+#define UHS2_NATIVE_CMD_READ (0 << UHS2_NATIVE_CMD_RW_POS)
+
+#define UHS2_NATIVE_CMD_PLEN_POS 4
+#define UHS2_NATIVE_CMD_PLEN_4B (1 << UHS2_NATIVE_CMD_PLEN_POS)
+#define UHS2_NATIVE_CMD_PLEN_8B (2 << UHS2_NATIVE_CMD_PLEN_POS)
+#define UHS2_NATIVE_CMD_PLEN_16B (3 << UHS2_NATIVE_CMD_PLEN_POS)
+
+#define UHS2_NATIVE_CCMD_GET_MIOADR_MASK 0xF00
+#define UHS2_NATIVE_CCMD_MIOADR_MASK 0x0F
+
+#define UHS2_NATIVE_CCMD_LIOADR_POS 8
+#define UHS2_NATIVE_CCMD_GET_LIOADR_MASK 0x0FF
+
+#define UHS2_DCMD_DM_POS 6
+#define UHS2_DCMD_2L_HD_MODE (1 << UHS2_DCMD_DM_POS)
+#define UHS2_DCMD_LM_POS 5
+#define UHS2_DCMD_LM_TLEN_EXIST (1 << UHS2_DCMD_LM_POS)
+#define UHS2_DCMD_TLUM_POS 4
+#define UHS2_DCMD_TLUM_BYTE_MODE (1 << UHS2_DCMD_TLUM_POS)
+#define UHS2_NATIVE_DCMD_DAM_POS 3
+#define UHS2_NATIVE_DCMD_DAM_IO (1 << UHS2_NATIVE_DCMD_DAM_POS)
+/*
+ * Per UHS2 spec, DCMD payload should be MSB first. There may be
+ * two types of data be assembled to MSB:
+ * 1. TLEN: Input block size for signle read/write and number of blocks
+ * for multiple read/write to calculate TLEN as MSB first per spec.
+ * 2. SD command argument.
+ */
+static inline u32 uhs2_dcmd_convert_msb(u32 input)
+{
+ u32 ret = 0;
+
+ ret = ((input & 0xFF) << 24) |
+ (((input >> 8) & 0xFF) << 16) |
+ (((input >> 16) & 0xFF) << 8) |
+ ((input >> 24) & 0xFF);
+ return ret;
+}
+
+#define UHS2_RES_NACK_POS 7
+#define UHS2_RES_NACK_MASK (0x1 << UHS2_RES_NACK_POS)
+
+#define UHS2_RES_ECODE_POS 4
+#define UHS2_RES_ECODE_MASK 0x7
+#define UHS2_RES_ECODE_COND 1
+#define UHS2_RES_ECODE_ARG 2
+#define UHS2_RES_ECODE_GEN 3
+
+/* IOADR of device registers */
+#define UHS2_IOADR_GENERIC_CAPS 0x00
+#define UHS2_IOADR_PHY_CAPS 0x02
+#define UHS2_IOADR_LINK_CAPS 0x04
+#define UHS2_IOADR_RSV_CAPS 0x06
+#define UHS2_IOADR_GENERIC_SETTINGS 0x08
+#define UHS2_IOADR_PHY_SETTINGS 0x0A
+#define UHS2_IOADR_LINK_SETTINGS 0x0C
+#define UHS2_IOADR_PRESET 0x40
+
+/* SD application packets */
+#define UHS2_SD_CMD_INDEX_POS 8
+
+#define UHS2_SD_CMD_APP_POS 14
+#define UHS2_SD_CMD_APP (1 << UHS2_SD_CMD_APP_POS)
+
+struct uhs2_command {
+ u16 header;
+ u16 arg;
+ u32 *payload;
+ u32 payload_len;
+ u32 packet_len;
+ u8 *resp;
+ u8 resp_len;
+};
+
+struct uhs2_host_caps {
+ u32 dap;
+ u32 gap;
+ u32 maxblk_len;
+ u32 n_fcu;
+ u8 n_lanes;
+ u8 addr64;
+ u8 card_type;
+ u8 phy_rev;
+ u8 speed_range;
+ u8 can_hibernate;
+ u8 n_lss_sync;
+ u8 n_lss_dir;
+ u8 link_rev;
+ u8 host_type;
+ u8 n_data_gap;
+
+ u32 maxblk_len_set;
+ u32 n_fcu_set;
+ u8 n_lanes_set;
+ u8 n_lss_sync_set;
+ u8 n_lss_dir_set;
+ u8 n_data_gap_set;
+ u8 max_retry_set;
+};
+
+struct uhs2_card_prop {
+ u32 node_id;
+ u32 dap;
+ u32 gap;
+ u32 n_fcu;
+ u32 maxblk_len;
+ u8 n_lanes;
+ u8 dadr_len;
+ u8 app_type;
+ u8 phy_minor_rev;
+ u8 phy_major_rev;
+ u8 can_hibernate;
+ u8 n_lss_sync;
+ u8 n_lss_dir;
+ u8 link_minor_rev;
+ u8 link_major_rev;
+ u8 dev_type;
+ u8 n_data_gap;
+
+ u32 n_fcu_set;
+ u32 maxblk_len_set;
+ u8 n_lanes_set;
+ u8 speed_range_set;
+ u8 n_lss_sync_set;
+ u8 n_lss_dir_set;
+ u8 n_data_gap_set;
+ u8 pwrctrl_mode_set;
+ u8 max_retry_set;
+
+ u8 cfg_complete;
+};
+
+enum uhs2_act {
+ SET_CONFIG,
+ ENABLE_INT,
+ DISABLE_INT,
+ SET_SPEED_B,
+ CHECK_DORMANT,
+};
+
+/* UHS-II Device Registers */
+#define UHS2_DEV_CONFIG_REG 0x000
+
+/* General Caps and Settings registers */
+#define UHS2_DEV_CONFIG_GEN_CAPS (UHS2_DEV_CONFIG_REG + 0x000)
+#define UHS2_DEV_CONFIG_N_LANES_POS 8
+#define UHS2_DEV_CONFIG_N_LANES_MASK 0x3F
+#define UHS2_DEV_CONFIG_2L_HD_FD 0x1
+#define UHS2_DEV_CONFIG_2D1U_FD 0x2
+#define UHS2_DEV_CONFIG_1D2U_FD 0x4
+#define UHS2_DEV_CONFIG_2D2U_FD 0x8
+#define UHS2_DEV_CONFIG_DADR_POS 14
+#define UHS2_DEV_CONFIG_DADR_MASK 0x1
+#define UHS2_DEV_CONFIG_APP_POS 16
+#define UHS2_DEV_CONFIG_APP_MASK 0xFF
+#define UHS2_DEV_CONFIG_APP_SD_MEM 0x1
+
+#define UHS2_DEV_CONFIG_GEN_SET (UHS2_DEV_CONFIG_REG + 0x008)
+#define UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD 0x0
+#define UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE (0x1 << 31)
+
+/* PHY Caps and Settings registers */
+#define UHS2_DEV_CONFIG_PHY_CAPS (UHS2_DEV_CONFIG_REG + 0x002)
+#define UHS2_DEV_CONFIG_PHY_MINOR_MASK 0xF
+#define UHS2_DEV_CONFIG_PHY_MAJOR_POS 4
+#define UHS2_DEV_CONFIG_PHY_MAJOR_MASK 0x3
+#define UHS2_DEV_CONFIG_CAN_HIBER_POS 15
+#define UHS2_DEV_CONFIG_CAN_HIBER_MASK 0x1
+#define UHS2_DEV_CONFIG_PHY_CAPS1 (UHS2_DEV_CONFIG_REG + 0x003)
+#define UHS2_DEV_CONFIG_N_LSS_SYN_MASK 0xF
+#define UHS2_DEV_CONFIG_N_LSS_DIR_POS 4
+#define UHS2_DEV_CONFIG_N_LSS_DIR_MASK 0xF
+
+#define UHS2_DEV_CONFIG_PHY_SET (UHS2_DEV_CONFIG_REG + 0x00A)
+#define UHS2_DEV_CONFIG_PHY_SET_SPEED_POS 6
+#define UHS2_DEV_CONFIG_PHY_SET_SPEED_A 0x0
+#define UHS2_DEV_CONFIG_PHY_SET_SPEED_B 0x1
+
+/* LINK-TRAN Caps and Settins registers */
+#define UHS2_DEV_CONFIG_LINK_TRAN_CAPS (UHS2_DEV_CONFIG_REG + 0x004)
+#define UHS2_DEV_CONFIG_LT_MINOR_MASK 0xF
+#define UHS2_DEV_CONFIG_LT_MAJOR_POS 4
+#define UHS2_DEV_CONFIG_LT_MAJOR_MASK 0x3
+#define UHS2_DEV_CONFIG_N_FCU_POS 8
+#define UHS2_DEV_CONFIG_N_FCU_MASK 0xFF
+#define UHS2_DEV_CONFIG_DEV_TYPE_POS 16
+#define UHS2_DEV_CONFIG_DEV_TYPE_MASK 0x7
+#define UHS2_DEV_CONFIG_MAX_BLK_LEN_POS 20
+#define UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK 0xFFF
+#define UHS2_DEV_CONFIG_LINK_TRAN_CAPS1 (UHS2_DEV_CONFIG_REG + 0x005)
+#define UHS2_DEV_CONFIG_N_DATA_GAP_MASK 0xFF
+
+#define UHS2_DEV_CONFIG_LINK_TRAN_SET (UHS2_DEV_CONFIG_REG + 0x00C)
+#define UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN 0x200
+#define UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS 16
+
+/* Preset register */
+#define UHS2_DEV_CONFIG_PRESET (UHS2_DEV_CONFIG_REG + 0x040)
+
+#define UHS2_DEV_INT_REG 0x100
+
+#define UHS2_DEV_STATUS_REG 0x180
+
+#define UHS2_DEV_CMD_REG 0x200
+#define UHS2_DEV_CMD_FULL_RESET (UHS2_DEV_CMD_REG + 0x000)
+#define UHS2_DEV_CMD_GO_DORMANT_STATE (UHS2_DEV_CMD_REG + 0x001)
+#define UHS2_DEV_CMD_DORMANT_HIBER (0x1 << 7)
+#define UHS2_DEV_CMD_DEVICE_INIT (UHS2_DEV_CMD_REG + 0x002)
+#define UHS2_DEV_CMD_ENUMERATE (UHS2_DEV_CMD_REG + 0x003)
+#define UHS2_DEV_CMD_TRANS_ABORT (UHS2_DEV_CMD_REG + 0x004)
+
+#define UHS2_RCLK_MAX 52000000
+#define UHS2_RCLK_MIN 26000000
+
+#endif /* LINUX_MMC_UHS2_H */
--
2.24.1
Powered by blists - more mailing lists