linux-kernel - [PATCH v2 8/8] arm64: zynqmp: Setup default number of chipselects for zcu100

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <227c68a635b031ce20ba2a48a950bf4407c01359.1578577931.git.michal.simek@xilinx.com>
Date:   Thu,  9 Jan 2020 14:52:22 +0100
From:   Michal Simek <michal.simek@...inx.com>
To:     linux-arm-kernel@...ts.infradead.org, git@...inx.com
Cc:     Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>,
        Jan Kiszka <jan.kiszka@...mens.com>,
        Mark Rutland <mark.rutland@....com>,
        Rajan Vaja <rajan.vaja@...inx.com>,
        Rob Herring <robh+dt@...nel.org>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 8/8] arm64: zynqmp: Setup default number of chipselects for zcu100

There is only one chipselect on each connector.
Define it directly in board dts file.
There should be an option to use more chipselects via gpios.

Signed-off-by: Michal Simek <michal.simek@...inx.com>
---

Changes in v2: None

 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 2b3757dd74cc..a109e82982ae 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -250,11 +250,13 @@ wlcore: wifi@2 {
 &spi0 { /* Low Speed connector */
 	status = "okay";
 	label = "LS-SPI0";
+	num-cs = <1>;
 };
 
 &spi1 { /* High Speed connector */
 	status = "okay";
 	label = "HS-SPI1";
+	num-cs = <1>;
 };
 
 &uart0 {
-- 
2.24.0