linux-kernel - [PATCH v2 4/8] arm64: zynqmp: Turn comment to gpio-line-names

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <daa153e9b77184e29a4064efebd759cfb999de7a.1578577931.git.michal.simek@xilinx.com>
Date:   Thu,  9 Jan 2020 14:52:18 +0100
From:   Michal Simek <michal.simek@...inx.com>
To:     linux-arm-kernel@...ts.infradead.org, git@...inx.com
Cc:     Anurag Kumar Vulisha <anurag.kumar.vulisha@...inx.com>,
        Harini Katakam <harini.katakam@...inx.com>,
        Mark Rutland <mark.rutland@....com>,
        Rajan Vaja <rajan.vaja@...inx.com>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/8] arm64: zynqmp: Turn comment to gpio-line-names

Label gpio lines properly.

Signed-off-by: Michal Simek <michal.simek@...inx.com>
---

Changes in v2: None

 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    | 43 ++++---------------
 1 file changed, 9 insertions(+), 34 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7c6b538490f8..c96e8416fa7e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -125,21 +125,11 @@ &i2c0 {
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - PS_GTR_LAN_SEL0
-		 * 1 - PS_GTR_LAN_SEL1
-		 * 2 - PS_GTR_LAN_SEL2
-		 * 3 - PS_GTR_LAN_SEL3
-		 * 4 - PCI_CLK_DIR_SEL
-		 * 5 - IIC_MUX_RESET_B
-		 * 6 - GEM3_EXP_RESET_B
-		 * 7, 10 - 17 - not connected
-		 */
-
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
 		gtr-sel0 {
 			gpio-hog;
 			gpios = <0 0>;
@@ -169,27 +159,12 @@ gtr-sel3 {
 	tca6416_u61: gpio@21 {
 		compatible = "ti,tca6416";
 		reg = <0x21>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - VCCPSPLL_EN
-		 * 1 - MGTRAVCC_EN
-		 * 2 - MGTRAVTT_EN
-		 * 3 - VCCPSDDRPLL_EN
-		 * 4 - MIO26_PMU_INPUT_LS
-		 * 5 - PL_PMBUS_ALERT
-		 * 6 - PS_PMBUS_ALERT
-		 * 7 - MAXIM_PMBUS_ALERT
-		 * 10 - PL_DDR4_VTERM_EN
-		 * 11 - PL_DDR4_VPP_2V5_EN
-		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
-		 * 13 - PS_DIMM_SUSPEND_EN
-		 * 14 - PS_DDR4_VTERM_EN
-		 * 15 - PS_DDR4_VPP_2V5_EN
-		 * 16 - 17 - not connected
-		 */
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
 	};
 
 	i2c-mux@75 { /* u60 */
-- 
2.24.0