| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200110153932.14970-2-john.ogness@linutronix.de>
Date: Fri, 10 Jan 2020 16:45:31 +0106
From: John Ogness <john.ogness@...utronix.de>
To: Sebastian Andrzej Siewior <bigeasy@...utronix.de>
Cc: Petr Mladek <pmladek@...e.com>,
Sergey Senozhatsky <sergey.senozhatsky@...il.com>,
Dick Hollenbeck <dick@...tplc.com>,
linux-kernel@...r.kernel.org, linux-rt-users@...r.kernel.org
Subject: [PATCH RT 1/2] serial: 8250: only atomic lock for console
The atomic console implementation requires that IER is synchronized
between atomic and non-atomic usage. However, it was implemented such
that the console_atomic_lock was performed for all IER access, even
if that port was not a console.
The implementation also used a usage counter to keep track of IER
clear/restore windows. However, this is not needed because the
console_atomic_lock synchronization of IER access with prevent any
situations where IER is prematurely restored or left cleared.
Move the IER access functions to inline macros. They will only
console_atomic_lock if the port is a console. Remove the
restore_ier() function by having clear_ier() return the prior IER
value so that the caller can restore it using set_ier(). Rename the
IER access functions to match other 8250 wrapper macros.
Suggested-by: Dick Hollenbeck <dick@...tplc.com>
Signed-off-by: John Ogness <john.ogness@...utronix.de>
---
drivers/tty/serial/8250/8250.h | 65 +++++++++++++++--------
drivers/tty/serial/8250/8250_core.c | 6 +--
drivers/tty/serial/8250/8250_dma.c | 4 +-
drivers/tty/serial/8250/8250_port.c | 81 +++++++----------------------
4 files changed, 66 insertions(+), 90 deletions(-)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 4e6c74330829..b29aed97a54d 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -96,10 +96,6 @@ struct serial8250_config {
#define SERIAL8250_SHARE_IRQS 0
#endif
-void set_ier(struct uart_8250_port *up, unsigned char ier);
-void clear_ier(struct uart_8250_port *up);
-void restore_ier(struct uart_8250_port *up);
-
#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \
{ \
.iobase = _base, \
@@ -134,39 +130,64 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
up->dl_write(up, value);
}
-static inline bool serial8250_set_THRI(struct uart_8250_port *up)
+static inline void serial8250_set_IER(struct uart_8250_port *up,
+ unsigned char ier)
{
- if (up->ier & UART_IER_THRI)
- return false;
- up->ier |= UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
- return true;
+ struct uart_port *port = &up->port;
+ unsigned int flags;
+ bool is_console;
+
+ is_console = uart_console(port);
+
+ if (is_console)
+ console_atomic_lock(&flags);
+
+ serial_out(up, UART_IER, ier);
+
+ if (is_console)
+ console_atomic_unlock(flags);
}
-static inline bool serial8250_set_THRI_sier(struct uart_8250_port *up)
+static inline unsigned char serial8250_clear_IER(struct uart_8250_port *up)
{
- if (up->ier & UART_IER_THRI)
- return false;
- up->ier |= UART_IER_THRI;
- set_ier(up, up->ier);
- return true;
+ struct uart_port *port = &up->port;
+ unsigned int clearval = 0;
+ unsigned int prior;
+ unsigned int flags;
+ bool is_console;
+
+ is_console = uart_console(port);
+
+ if (up->capabilities & UART_CAP_UUE)
+ clearval = UART_IER_UUE;
+
+ if (is_console)
+ console_atomic_lock(&flags);
+
+ prior = serial_port_in(port, UART_IER);
+ serial_port_out(port, UART_IER, clearval);
+
+ if (is_console)
+ console_atomic_unlock(flags);
+
+ return prior;
}
-static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
+static inline bool serial8250_set_THRI(struct uart_8250_port *up)
{
- if (!(up->ier & UART_IER_THRI))
+ if (up->ier & UART_IER_THRI)
return false;
- up->ier &= ~UART_IER_THRI;
- serial_out(up, UART_IER, up->ier);
+ up->ier |= UART_IER_THRI;
+ serial8250_set_IER(up, up->ier);
return true;
}
-static inline bool serial8250_clear_THRI_sier(struct uart_8250_port *up)
+static inline bool serial8250_clear_THRI(struct uart_8250_port *up)
{
if (!(up->ier & UART_IER_THRI))
return false;
up->ier &= ~UART_IER_THRI;
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
return true;
}
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 8c40472eff19..eabb9274c0a9 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -275,7 +275,7 @@ static void serial8250_timeout(struct timer_list *t)
static void serial8250_backup_timeout(struct timer_list *t)
{
struct uart_8250_port *up = from_timer(up, t, timer);
- unsigned int iir, lsr;
+ unsigned int iir, ier = 0, lsr;
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
@@ -285,7 +285,7 @@ static void serial8250_backup_timeout(struct timer_list *t)
* based handler.
*/
if (up->port.irq)
- clear_ier(up);
+ ier = serial8250_clear_IER(up);
iir = serial_in(up, UART_IIR);
@@ -308,7 +308,7 @@ static void serial8250_backup_timeout(struct timer_list *t)
serial8250_tx_chars(up);
if (up->port.irq)
- restore_ier(up);
+ serial8250_set_IER(up, ier);
spin_unlock_irqrestore(&up->port.lock, flags);
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index c91dafbca57c..890fa7ddaa7f 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -35,7 +35,7 @@ static void __dma_tx_complete(void *param)
ret = serial8250_tx_dma(p);
if (ret)
- serial8250_set_THRI_sier(p);
+ serial8250_set_THRI(p);
spin_unlock_irqrestore(&p->port.lock, flags);
}
@@ -98,7 +98,7 @@ int serial8250_tx_dma(struct uart_8250_port *p)
dma_async_issue_pending(dma->txchan);
if (dma->tx_err) {
dma->tx_err = 0;
- serial8250_clear_THRI_sier(p);
+ serial8250_clear_THRI(p);
}
return 0;
err:
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 51d9a79b70db..776770112223 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -721,7 +721,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
serial_out(p, UART_EFR, UART_EFR_ECB);
serial_out(p, UART_LCR, 0);
}
- set_ier(p, sleep ? UART_IERX_SLEEP : 0);
+ serial8250_set_IER(p, sleep ? UART_IERX_SLEEP : 0);
if (p->capabilities & UART_CAP_EFR) {
serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(p, UART_EFR, efr);
@@ -1390,7 +1390,7 @@ static void serial8250_stop_rx(struct uart_port *port)
up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
up->port.read_status_mask &= ~UART_LSR_DR;
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
serial8250_rpm_put(up);
}
@@ -1408,7 +1408,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
serial8250_clear_and_reinit_fifos(p);
p->ier |= UART_IER_RLSI | UART_IER_RDI;
- set_ier(p, p->ier);
+ serial8250_set_IER(p, p->ier);
}
}
static enum hrtimer_restart serial8250_em485_handle_stop_tx(struct hrtimer *t)
@@ -1459,7 +1459,7 @@ static void __stop_tx_rs485(struct uart_8250_port *p)
static inline void __do_stop_tx(struct uart_8250_port *p)
{
- if (serial8250_clear_THRI_sier(p))
+ if (serial8250_clear_THRI(p))
serial8250_rpm_put_tx(p);
}
@@ -1509,7 +1509,7 @@ static inline void __start_tx(struct uart_port *port)
if (up->dma && !up->dma->tx_dma(up))
return;
- if (serial8250_set_THRI_sier(up)) {
+ if (serial8250_set_THRI(up)) {
if (up->bugs & UART_BUG_TXEN) {
unsigned char lsr;
@@ -1616,7 +1616,7 @@ static void serial8250_disable_ms(struct uart_port *port)
mctrl_gpio_disable_ms(up->gpios);
up->ier &= ~UART_IER_MSI;
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
}
static void serial8250_enable_ms(struct uart_port *port)
@@ -1632,7 +1632,7 @@ static void serial8250_enable_ms(struct uart_port *port)
up->ier |= UART_IER_MSI;
serial8250_rpm_get(up);
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
serial8250_rpm_put(up);
}
@@ -1991,54 +1991,6 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
}
}
-static atomic_t ier_counter = ATOMIC_INIT(0);
-static atomic_t ier_value = ATOMIC_INIT(0);
-
-void set_ier(struct uart_8250_port *up, unsigned char ier)
-{
- struct uart_port *port = &up->port;
- unsigned int flags;
-
- console_atomic_lock(&flags);
- if (atomic_read(&ier_counter) > 0)
- atomic_set(&ier_value, ier);
- else
- serial_port_out(port, UART_IER, ier);
- console_atomic_unlock(flags);
-}
-
-void clear_ier(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- unsigned int ier_cleared = 0;
- unsigned int flags;
- unsigned int ier;
-
- console_atomic_lock(&flags);
- atomic_inc(&ier_counter);
- ier = serial_port_in(port, UART_IER);
- if (up->capabilities & UART_CAP_UUE)
- ier_cleared = UART_IER_UUE;
- if (ier != ier_cleared) {
- serial_port_out(port, UART_IER, ier_cleared);
- atomic_set(&ier_value, ier);
- }
- console_atomic_unlock(flags);
-}
-EXPORT_SYMBOL_GPL(clear_ier);
-
-void restore_ier(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- unsigned int flags;
-
- console_atomic_lock(&flags);
- if (atomic_fetch_dec(&ier_counter) == 1)
- serial_port_out(port, UART_IER, atomic_read(&ier_value));
- console_atomic_unlock(flags);
-}
-EXPORT_SYMBOL_GPL(restore_ier);
-
#ifdef CONFIG_CONSOLE_POLL
/*
* Console polling routines for writing and reading from the uart while
@@ -2070,10 +2022,11 @@ static int serial8250_get_poll_char(struct uart_port *port)
static void serial8250_put_poll_char(struct uart_port *port,
unsigned char c)
{
+ unsigned int ier;
struct uart_8250_port *up = up_to_u8250p(port);
serial8250_rpm_get(up);
- clear_ier(up);
+ ier = serial8250_clear_IER(up);
wait_for_xmitr(up, BOTH_EMPTY);
/*
@@ -2086,7 +2039,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
* and restore the IER
*/
wait_for_xmitr(up, BOTH_EMPTY);
- restore_ier(up);
+ serial8250_set_IER(up, ier);
serial8250_rpm_put(up);
}
@@ -2394,7 +2347,7 @@ void serial8250_do_shutdown(struct uart_port *port)
*/
spin_lock_irqsave(&port->lock, flags);
up->ier = 0;
- set_ier(up, 0);
+ serial8250_set_IER(up, 0);
spin_unlock_irqrestore(&port->lock, flags);
synchronize_irq(port->irq);
@@ -2679,7 +2632,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (up->capabilities & UART_CAP_RTOIE)
up->ier |= UART_IER_RTOIE;
- set_ier(up, up->ier);
+ serial8250_set_IER(up, up->ier);
if (up->capabilities & UART_CAP_EFR) {
unsigned char efr = 0;
@@ -3189,12 +3142,13 @@ void serial8250_console_write_atomic(struct uart_8250_port *up,
{
struct uart_port *port = &up->port;
unsigned int flags;
+ unsigned int ier;
console_atomic_lock(&flags);
touch_nmi_watchdog();
- clear_ier(up);
+ ier = serial8250_clear_IER(up);
if (atomic_fetch_inc(&up->console_printing)) {
uart_console_write(port, "\n", 1,
@@ -3204,7 +3158,7 @@ void serial8250_console_write_atomic(struct uart_8250_port *up,
atomic_dec(&up->console_printing);
wait_for_xmitr(up, BOTH_EMPTY);
- restore_ier(up);
+ serial8250_set_IER(up, ier);
console_atomic_unlock(flags);
}
@@ -3220,13 +3174,14 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
{
struct uart_port *port = &up->port;
unsigned long flags;
+ unsigned int ier;
touch_nmi_watchdog();
serial8250_rpm_get(up);
spin_lock_irqsave(&port->lock, flags);
- clear_ier(up);
+ ier = serial8250_clear_IER(up);
/* check scratch reg to see if port powered off during system sleep */
if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
@@ -3243,7 +3198,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
* and restore the IER
*/
wait_for_xmitr(up, BOTH_EMPTY);
- restore_ier(up);
+ serial8250_set_IER(up, ier);
/*
* The receive handling will happen properly because the
--
2.20.1
Powered by blists - more mailing lists