linux-kernel - Re: [PATCH v4 1/3] dt-bindings: mmc: Document the Amlogic Meson SDHC MMC host controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 13 Jan 2020 15:10:20 -0600
From:   Rob Herring <robh@...nel.org>
To:     Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc:     linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-mmc@...r.kernel.org, ulf.hansson@...aro.org,
        jianxin.pan@...ogic.com, mark.rutland@....com,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        lnykww@...il.com, yinxin_1989@...yun.com
Subject: Re: [PATCH v4 1/3] dt-bindings: mmc: Document the Amlogic Meson SDHC
 MMC host controller

On Sun, Jan 12, 2020 at 01:24:57AM +0100, Martin Blumenstingl wrote:
> This documents the devicetree bindings for the SDHC MMC host controller
> found in Meson6, Meson8, Meson8b and Meson8m2 SoCs. It can use a
> bus-width of 1/4/8-bit and it supports eMMC spec 4.4x/4.5x including
> HS200 mode (up to 100MHz clock). It embeds an internal clock controller
> which outputs four clocks (mod_clk, sd_clk, tx_clk and rx_clk) and is
> fed by four external input clocks (clkin[0-3]). "pclk" is the module
> register clock, it has to be enabled to access the registers.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> ---
>  .../bindings/mmc/amlogic,meson-mx-sdhc.yaml   | 83 +++++++++++++++++++
>  .../dt-bindings/clock/meson-mx-sdhc-clkc.h    |  8 ++
>  2 files changed, 91 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
>  create mode 100644 include/dt-bindings/clock/meson-mx-sdhc-clkc.h

Fails 'make dt_binding_check':

Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.example.dts:17:53: 
warning: extra tokens at end of #include directive
 #include <dt-bindings/clock/meson-mx-sdhc-clkc.yaml>;
                                                     ^
Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.example.dts:17:10: 
fatal error: dt-bindings/clock/meson-mx-sdhc-clkc.yaml: No such file or directory
 #include <dt-bindings/clock/meson-mx-sdhc-clkc.yaml>;
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

> 
> diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
> new file mode 100644
> index 000000000000..74632692ce26
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Meson SDHC controller Device Tree Bindings
> +
> +allOf:
> +  - $ref: "mmc-controller.yaml"
> +
> +maintainers:
> +  - Martin Blumenstingl <martin.blumenstingl@...glemail.com>
> +
> +description: |
> +  The SDHC MMC host controller on Amlogic SoCs provides an eMMC and MMC
> +  card interface with 1/4/8-bit bus width.
> +  It supports eMMC spec 4.4x/4.5x including HS200 (up to 100MHz clock).
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +        - amlogic,meson8-sdhc
> +        - amlogic,meson8b-sdhc
> +        - amlogic,meson8m2-sdhc
> +      - const: amlogic,meson-mx-sdhc
> +
> +  reg:
> +    minItems: 1
> +
> +  interrupts:
> +    minItems: 1
> +
> +  "#clock-cells":
> +    const: 1
> +
> +  clocks:
> +    minItems: 9
> +
> +  clock-names:
> +    items:
> +      - const: pclk
> +      - const: mod_clk
> +      - const: sd_clk
> +      - const: rx_clk
> +      - const: tx_clk
> +      - const: clkin0
> +      - const: clkin1
> +      - const: clkin2
> +      - const: clkin3

Kind of odd to put the output clocks in the middle of the list.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#clock-cells"
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/meson-mx-sdhc-clkc.yaml>;
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    sdhc: mmc@...0 {
> +      compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
> +      reg = <0x8e00 0x42>;
> +      interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
> +      #clock-cells = <1>;
> +      clocks = <&sdhc_pclk>,
> +               <&sdhc SDHC_CLKID_MOD_CLK>,
> +               <&sdhc SDHC_CLKID_SD_CLK>,
> +               <&sdhc SDHC_CLKID_TX_CLK>,
> +               <&sdhc SDHC_CLKID_RX_CLK>,
> +               <&xtal>,
> +               <&fclk_div4>,
> +               <&fclk_div3>,
> +               <&fclk_div5>;
> +      clock-names = "pclk", "mod_clk", "sd_clk", "tx_clk", "rx_clk",
> +                    "clkin0", "clkin1", "clkin2", "clkin3";
> +    };
> diff --git a/include/dt-bindings/clock/meson-mx-sdhc-clkc.h b/include/dt-bindings/clock/meson-mx-sdhc-clkc.h
> new file mode 100644
> index 000000000000..ad9f6e4dc426
> --- /dev/null
> +++ b/include/dt-bindings/clock/meson-mx-sdhc-clkc.h
> @@ -0,0 +1,8 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#define SDHC_CLKID_SRC_SEL	0
> +#define SDHC_CLKID_DIV		1
> +#define SDHC_CLKID_MOD_CLK	2
> +#define SDHC_CLKID_SD_CLK	3
> +#define SDHC_CLKID_TX_CLK	4
> +#define SDHC_CLKID_RX_CLK	5
> -- 
> 2.24.1
>