lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 13 Jan 2020 14:44:07 +0800
From:   Nicolas Boichat <drinkcat@...omium.org>
To:     Rob Herring <robh@...nel.org>
Cc:     Roger Lu <roger.lu@...iatek.com>,
        Kevin Hilman <khilman@...nel.org>,
        Nicolas Boichat <drinkcat@...gle.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Fan Chen <fan.chen@...iatek.com>,
        HenryC Chen <HenryC.Chen@...iatek.com>,
        YT Lee <yt.lee@...iatek.com>,
        Xiaoqing Liu <Xiaoqing.Liu@...iatek.com>,
        Charles Yang <Charles.Yang@...iatek.com>,
        Angus Lin <Angus.Lin@...iatek.com>,
        Mark Rutland <mark.rutland@....com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Nishanth Menon <nm@...com>,
        Devicetree List <devicetree@...r.kernel.org>,
        linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        lkml <linux-kernel@...r.kernel.org>, linux-pm@...r.kernel.org
Subject: Re: [PATCH v6 1/3] dt-bindings: soc: add mtk svs dt-bindings

On Thu, Jan 9, 2020 at 4:38 AM Rob Herring <robh@...nel.org> wrote:
>
> On Tue, Jan 07, 2020 at 03:01:52PM +0800, Roger Lu wrote:
> > Document the binding for enabling mtk svs on MediaTek SoC.
> >
> > Signed-off-by: Roger Lu <roger.lu@...iatek.com>
> > ---
> >  .../devicetree/bindings/power/mtk-svs.txt     | 76 +++++++++++++++++++
> >  1 file changed, 76 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power/mtk-svs.txt
> >
> > diff --git a/Documentation/devicetree/bindings/power/mtk-svs.txt b/Documentation/devicetree/bindings/power/mtk-svs.txt
> > new file mode 100644
> > index 000000000000..9a3e81b9e1d2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/mtk-svs.txt
> > @@ -0,0 +1,76 @@
> > +* Mediatek Smart Voltage Scaling (MTK SVS)
> > +
> > +This describes the device tree binding for the MTK SVS controller (bank)
> > +which helps provide the optimized CPU/GPU/CCI voltages. This device also
> > +needs thermal data to calculate thermal slope for accurately compensate
> > +the voltages when temperature change.
> > +
> > +Required properties:
> > +- compatible:
> > +  - "mediatek,mt8183-svs" : For MT8183 family of SoCs
> > +- reg: Address range of the MTK SVS controller.
> > +- interrupts: IRQ for the MTK SVS controller.
> > +- clocks, clock-names: Clocks needed for the svs hardware. required
> > +                       clocks are:
> > +                    "main": Main clock for svs controller to work.
> > +- nvmem-cells: Phandle to the calibration data provided by a nvmem device.
> > +- nvmem-cell-names: Should be "svs-calibration-data" and "calibration-data"
> > +
> > +Subnodes:
> > +- svs-cpu-little: SVS bank device node of little CPU
> > +  compatible: "mediatek,mt8183-svs-cpu-little"
> > +  operating-points-v2: OPP table hooked by SVS little CPU bank.
> > +                    SVS will optimze this OPP table voltage part.
> > +  vcpu-little-supply: PMIC buck of little CPU
> > +- svs-cpu-big: SVS bank device node of big CPU
> > +  compatible: "mediatek,mt8183-svs-cpu-big"
> > +  operating-points-v2: OPP table hooked by SVS big CPU bank.
> > +                    SVS will optimze this OPP table voltage part.
> > +  vcpu-big-supply: PMIC buck of big CPU
> > +- svs-cci: SVS bank device node of CCI
> > +  compatible: "mediatek,mt8183-svs-cci"
> > +  operating-points-v2: OPP table hooked by SVS CCI bank.
> > +                    SVS will optimze this OPP table voltage part.
> > +  vcci-supply: PMIC buck of CCI
> > +- svs-gpu: SVS bank device node of GPU
> > +  compatible: "mediatek,mt8183-svs-gpu"
> > +  operating-points-v2: OPP table hooked by SVS GPU bank.
> > +                    SVS will optimze this OPP table voltage part.
> > +  vgpu-supply: PMIC buck of GPU
> > +
> > +Example:
> > +
> > +     svs: svs@...0b000 {
> > +             compatible = "mediatek,mt8183-svs";
> > +             reg = <0 0x1100b000 0 0x1000>;
> > +             interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
> > +             clocks = <&infracfg CLK_INFRA_THERM>;
> > +             clock-names = "main_clk";
> > +             nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
> > +             nvmem-cell-names = "svs-calibration-data", "calibration-data";
> > +
> > +             svs_cpu_little: svs-cpu-little {
> > +                     compatible = "mediatek,mt8183-svs-cpu-little";
> > +                     operating-points-v2 = <&cluster0_opp>;
> > +                     vcpu-little-supply = <&mt6358_vproc12_reg>;
> > +             };
>
> I don't think this is a good binding. This information already exists
> elsewhere in the DT, so your driver should just look in those nodes.
> For example the regulator can be in the cpu nodes or the OPP table
> itself.

Roger, if that helps, without changing any other binding, on 8183,
basically you could have:
 - svs-cpu-little: Add a handle to &cpu0 and get the regulator/opp
table from it.
 - svs-cpu-big: Handle to &cpu4
 - svs-cci: Handle to &cci
 - svs-gpu: Handle to &gpu (BTW, it is expected that SVS would only
apply to vgpu/mali regulator, and not vsram regulator?)

I'm not too sure how we'd fetch the right regulator name, however (for
the first 3 the name is "proc", for the last one it's "mali"), maybe
add a regulator-name list in the DT?

>
> Rob

Powered by blists - more mailing lists