[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200113121109.GG5414@dell>
Date: Mon, 13 Jan 2020 12:11:09 +0000
From: Lee Jones <lee.jones@...aro.org>
To: "Vaittinen, Matti" <Matti.Vaittinen@...rohmeurope.com>
Cc: "dmurphy@...com" <dmurphy@...com>,
"linux-leds@...r.kernel.org" <linux-leds@...r.kernel.org>,
"linux-rtc@...r.kernel.org" <linux-rtc@...r.kernel.org>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
"mazziesaccount@...il.com" <mazziesaccount@...il.com>,
"mturquette@...libre.com" <mturquette@...libre.com>,
"lgirdwood@...il.com" <lgirdwood@...il.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linus.walleij@...aro.org" <linus.walleij@...aro.org>,
"a.zummo@...ertech.it" <a.zummo@...ertech.it>,
"mark.rutland@....com" <mark.rutland@....com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"bgolaszewski@...libre.com" <bgolaszewski@...libre.com>,
"linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
"sboyd@...nel.org" <sboyd@...nel.org>,
"pavel@....cz" <pavel@....cz>,
"jacek.anaszewski@...il.com" <jacek.anaszewski@...il.com>,
"broonie@...nel.org" <broonie@...nel.org>
Subject: Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and
bd718x7 specific parts
On Mon, 13 Jan 2020, Vaittinen, Matti wrote:
> Hello Lee,
>
> On Mon, 2020-01-13 at 10:53 +0000, Lee Jones wrote:
> > On Wed, 08 Jan 2020, Vaittinen, Matti wrote:
> >
> > > Hello Lee,
> > >
> > > On Tue, 2020-01-07 at 12:41 +0000, Lee Jones wrote:
> > > > On Mon, 30 Dec 2019, Matti Vaittinen wrote:
> > > >
> > > > > Few ROHM PMICs allow setting the voltage states for different
> > > > > system states
> > > > > like RUN, IDLE, SUSPEND and LPSR. States are then changed via
> > > > > SoC
> > > > > specific
> > > > > mechanisms. bd718x7 driver implemented device-tree parsing
> > > > > functions for
> > > > > these state specific voltages. The parsing functions can be re-
> > > > > used
> > > > > by
> > > > > other ROHM chip drivers like bd71828. Split the generic
> > > > > functions
> > > > > from
> > > > > bd718x7-regulator.c to rohm-regulator.c and export them for
> > > > > other
> > > > > modules
> > > > > to use.
> > > > >
> > > > > Signed-off-by: Matti Vaittinen <
> > > > > matti.vaittinen@...rohmeurope.com>
> > > > > Acked-by: Mark Brown <broonie@...nel.org>
> > > > > ---
> >
> > [...]
> >
> > > > > +#if IS_ENABLED(CONFIG_REGULATOR_ROHM)
> > > > > +int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config
> > > > > *dvs,
> > > > > + struct device_node *np,
> > > > > + const struct regulator_desc
> > > > > *desc,
> > > > > + struct regmap *regmap);
> > > >
> > > > Does these really need to live in the parent's header file?
> > >
> > > I don't know what would be a better place?
> >
> > You don't have a regulator header file?
> >
> > It seems over-kill to create one for this, so leave it as is.
> >
> > > > What other call-sites are there?
> > >
> > > After this series the bd718x7-regulator.c and bd71828-regulator.c
> > > are
> > > the in-tree drivers using these. rohm-regulator.c is implementing
> > > them.
> > > And I hope we see yet another driver landing in later this year.
> > >
> > > Anyways, I will investigate if I can switch this to some common
> > > (not
> > > rohm specific) DT bindings at some point (I've scheduled this study
> > > to
> > > March) - If I can then they should live in regulator core headers.
> > >
> > > But changing the existing properties should again be own set of
> > > patches
> > > and I'd prefer doing that work independently of this series and not
> > > delaying the BD71828 due to not-yet-evaluated bd718x7 property
> > > changes.
> >
> > That's fine.
>
> Glad to hear :) By the way, I already sent the v9 ;)
It's in my queue.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists