| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <75278f35-c4c2-90bc-cc54-8c3b5bbdd7e1@xs4all.nl>
Date: Mon, 13 Jan 2020 14:30:36 +0100
From: Hans Verkuil <hverkuil-cisco@...all.nl>
To: guillaume La Roque <glaroque@...libre.com>,
narmstrong@...libre.com, mchehab@...nel.org, khilman@...libre.com,
devicetree@...r.kernel.org
Cc: linux-media@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/3] media: platform: meson-ao-cec-g12a: add wakeup
support
On 1/10/20 4:06 PM, guillaume La Roque wrote:
> Hi Hans,
>
> On 1/7/20 3:36 PM, Hans Verkuil wrote:
>> Hi Guillaume,
>>
>> On 12/13/19 2:29 PM, Guillaume La Roque wrote:
>>> add register configuration to activate wakeup feature in bl301
>>>
>>> Tested-by: Kevin Hilman <khilman@...libre.com>
>>> Signed-off-by: Guillaume La Roque <glaroque@...libre.com>
>>> ---
>>> drivers/media/platform/meson/ao-cec-g12a.c | 33 ++++++++++++++++++++++
>>> 1 file changed, 33 insertions(+)
>>>
>>> diff --git a/drivers/media/platform/meson/ao-cec-g12a.c b/drivers/media/platform/meson/ao-cec-g12a.c
>>> index 891533060d49..85850b974126 100644
>>> --- a/drivers/media/platform/meson/ao-cec-g12a.c
>>> +++ b/drivers/media/platform/meson/ao-cec-g12a.c
>>> @@ -25,6 +25,7 @@
>>> #include <media/cec.h>
>>> #include <media/cec-notifier.h>
>>> #include <linux/clk-provider.h>
>>> +#include <linux/mfd/syscon.h>
>>>
>>> /* CEC Registers */
>>>
>>> @@ -168,6 +169,18 @@
>>>
>>> #define CECB_WAKEUPCTRL 0x31
>>>
>>> +#define CECB_FUNC_CFG_REG 0xA0
>>> +#define CECB_FUNC_CFG_MASK GENMASK(6, 0)
>>> +#define CECB_FUNC_CFG_CEC_ON 0x01
>>> +#define CECB_FUNC_CFG_OTP_ON 0x02
>>> +#define CECB_FUNC_CFG_AUTO_STANDBY 0x04
>>> +#define CECB_FUNC_CFG_AUTO_POWER_ON 0x08
>>> +#define CECB_FUNC_CFG_ALL 0x2f
>>> +#define CECB_FUNC_CFG_NONE 0x0
>>> +
>>> +#define CECB_LOG_ADDR_REG 0xA4
>>> +#define CECB_LOG_ADDR_MASK GENMASK(22, 16)
>>> +
>>> struct meson_ao_cec_g12a_data {
>>> /* Setup the internal CECB_CTRL2 register */
>>> bool ctrl2_setup;
>>> @@ -177,6 +190,7 @@ struct meson_ao_cec_g12a_device {
>>> struct platform_device *pdev;
>>> struct regmap *regmap;
>>> struct regmap *regmap_cec;
>>> + struct regmap *regmap_ao_sysctrl;
>>> spinlock_t cec_reg_lock;
>>> struct cec_notifier *notify;
>>> struct cec_adapter *adap;
>>> @@ -518,6 +532,13 @@ meson_ao_cec_g12a_set_log_addr(struct cec_adapter *adap, u8 logical_addr)
>>> BIT(logical_addr - 8));
>>> }
>>>
>>> + if (ao_cec->regmap_ao_sysctrl)
>>> + ret |= regmap_update_bits(ao_cec->regmap_ao_sysctrl,
>>> + CECB_LOG_ADDR_REG,
>>> + CECB_LOG_ADDR_MASK,
>>> + FIELD_PREP(CECB_LOG_ADDR_MASK,
>>> + logical_addr));
>>> +
>>> /* Always set Broadcast/Unregistered 15 address */
>>> ret |= regmap_update_bits(ao_cec->regmap_cec, CECB_LADD_HIGH,
>>> BIT(CEC_LOG_ADDR_UNREGISTERED - 8),
>>> @@ -618,6 +639,13 @@ static int meson_ao_cec_g12a_adap_enable(struct cec_adapter *adap, bool enable)
>>> regmap_write(ao_cec->regmap_cec, CECB_CTRL2,
>>> FIELD_PREP(CECB_CTRL2_RISE_DEL_MAX, 2));
>>>
>>> + if (ao_cec->regmap_ao_sysctrl) {
>>> + regmap_update_bits(ao_cec->regmap_ao_sysctrl,
>>> + CECB_FUNC_CFG_REG,
>>> + CECB_FUNC_CFG_MASK,
>>> + CECB_FUNC_CFG_ALL);
>> What exactly is enabled here? Looking at CECB_FUNC_CFG_ALL it seems to
>> enable automatic standby (I presume when the STANDBY message is received?)
>> and power on (I presume when SET_STREAM_PATH is received?).
> this register and flags are used by bl301 part.
>
> amlogic implemented a task to check cec event/message.
>
> for power on in bl301 it's not only on SET_STREAM_PATH but also on :
>
> USER_CONTROL_PRESSED
> TEXT_VIEW_ON
Not IMAGE_VIEW_ON?
> ACTIVE_SOURCE
> ROUTING_CHANGE
>
> when in CECB_FUNC_CFG_REG register we put CECB_FUNC_CFG_CEC_ON and CECB_FUNC_CFG_AUTO_POWER_ON
>
> it's not possible to change this
Too bad since ACTIVE_SOURCE and ROUTING_CHANGE should not power on a CEC device.
See section 11.5.2 in the HDMI 2.0 Specification for more details, if you have
that spec.
>
>>
>> Do you really want to automatically handle STANDBY that way? What does this
>> do on the hardware level anyway? Isn't this something that should be
>> controlled in userspace?
>
> in fact i do a new check in bl301 code amlogic do nothing on STANDBY so i will clean code
>
> and activate real option supported by bl301
>
>>
>> Similar questions for power on: you may not always want to enable this feature
>> since it depends very much on the precise use-case.
>>
>> And which messages it reacts to in order to do a power-on needs to be
>> documented since this differs depending on whether the CEC adapter is
>> used for a TV or for a playback device. This feature may be hardwired for
>> a playback device only, in which case it should probably be disabled if
>> the CEC adapter is configured as a TV.
>>
>> In any case I would like to see some more details about how this works,
>> especially since this is the first implementation of such a feature.
>>
>> I suspect that some userspace API might be needed to get the right level
>> of control of such a feature.
>
> i will send v3 next week with some comments and fix ( disable are missing for example)
>
> actual usercase is for android TV.
>
> when cec was enable android TV want to be wakeup by cec event.
>
>
>> Regards,
>>
>> Hans
>>
>
> thanks for your review
No problem!
Hans
>
> Regards
>
> Guillaume
>
>>> + }
>>> +
>>> meson_ao_cec_g12a_irq_setup(ao_cec, true);
>>>
>>> return 0;
>>> @@ -685,6 +713,11 @@ static int meson_ao_cec_g12a_probe(struct platform_device *pdev)
>>> goto out_probe_adapter;
>>> }
>>>
>>> + ao_cec->regmap_ao_sysctrl = syscon_regmap_lookup_by_phandle
>>> + (pdev->dev.of_node, "amlogic,ao-sysctrl");
>>> + if (IS_ERR(ao_cec->regmap_ao_sysctrl))
>>> + dev_warn(&pdev->dev, "ao-sysctrl syscon regmap lookup failed.\n");
>>> +
>>> irq = platform_get_irq(pdev, 0);
>>> ret = devm_request_threaded_irq(&pdev->dev, irq,
>>> meson_ao_cec_g12a_irq,
>>>
Powered by blists - more mailing lists