linux-kernel - Re: [PATCH v4] Bluetooth: hci_qca: Add qca_power_on() API to support both wcn399x and Rome power up

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5bd30d7a3fabcc73d50e428d4a874755@codeaurora.org>
Date:   Mon, 13 Jan 2020 12:31:08 +0800
From:   Rocky Liao <rjliao@...eaurora.org>
To:     marcel@...tmann.org, johan.hedberg@...il.com
Cc:     mka@...omium.org, linux-kernel@...r.kernel.org,
        linux-bluetooth@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v4] Bluetooth: hci_qca: Add qca_power_on() API to support
 both wcn399x and Rome power up

Sorry, please ignore this one. I was wanting to send v5...

在 2020-01-13 12:29，Rocky Liao 写道：
> This patch adds a unified API qca_power_on() to support both wcn399x 
> and
> Rome power on. For wcn399x it calls the qca_wcn3990_init() to init the
> regulators, and for Rome it pulls up the bt_en GPIO to power up the 
> btsoc.
> It also moves all the power up operation from hdev->open() to
> hdev->setup().
> 
> Signed-off-by: Rocky Liao <rjliao@...eaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
> ---
> 
> Changes in v2: None
> Changes in v3:
>   -moved all the power up operation from open() to setup()
>   -updated the commit message
> Changes in v4:
>   -made a single call to qca_power_on() in setup()
> 
> 
>  drivers/bluetooth/hci_qca.c | 48 +++++++++++++++++++++++--------------
>  1 file changed, 30 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 82e4cd4b6663..6a67e5489b16 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -541,7 +541,6 @@ static int qca_open(struct hci_uart *hu)
>  {
>  	struct qca_serdev *qcadev;
>  	struct qca_data *qca;
> -	int ret;
> 
>  	BT_DBG("hu %p qca_open", hu);
> 
> @@ -582,23 +581,10 @@ static int qca_open(struct hci_uart *hu)
>  	hu->priv = qca;
> 
>  	if (hu->serdev) {
> -
>  		qcadev = serdev_device_get_drvdata(hu->serdev);
> -		if (!qca_is_wcn399x(qcadev->btsoc_type)) {
> -			gpiod_set_value_cansleep(qcadev->bt_en, 1);
> -			/* Controller needs time to bootup. */
> -			msleep(150);
> -		} else {
> +		if (qca_is_wcn399x(qcadev->btsoc_type)) {
>  			hu->init_speed = qcadev->init_speed;
>  			hu->oper_speed = qcadev->oper_speed;
> -			ret = qca_regulator_enable(qcadev);
> -			if (ret) {
> -				destroy_workqueue(qca->workqueue);
> -				kfree_skb(qca->rx_skb);
> -				hu->priv = NULL;
> -				kfree(qca);
> -				return ret;
> -			}
>  		}
>  	}
> 
> @@ -1531,6 +1517,31 @@ static int qca_wcn3990_init(struct hci_uart *hu)
>  	return 0;
>  }
> 
> +static int qca_power_on(struct hci_dev *hdev)
> +{
> +	struct hci_uart *hu = hci_get_drvdata(hdev);
> +	enum qca_btsoc_type soc_type = qca_soc_type(hu);
> +	struct qca_serdev *qcadev;
> +	int ret = 0;
> +
> +	/* Non-serdev device usually is powered by external power
> +	 * and don't need additional action in driver for power on
> +	 */
> +	if (!hu->serdev)
> +		return 0;
> +
> +	if (qca_is_wcn399x(soc_type)) {
> +		ret = qca_wcn3990_init(hu);
> +	} else {
> +		qcadev = serdev_device_get_drvdata(hu->serdev);
> +		gpiod_set_value_cansleep(qcadev->bt_en, 1);
> +		/* Controller needs time to bootup. */
> +		msleep(150);
> +	}
> +
> +	return ret;
> +}
> +
>  static int qca_setup(struct hci_uart *hu)
>  {
>  	struct hci_dev *hdev = hu->hdev;
> @@ -1553,6 +1564,10 @@ static int qca_setup(struct hci_uart *hu)
>  	 */
>  	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
> 
> +	ret = qca_power_on(hdev);
> +	if (ret)
> +		return ret;
> +
>  	if (qca_is_wcn399x(soc_type)) {
>  		bt_dev_info(hdev, "setting up wcn3990");
> 
> @@ -1562,9 +1577,6 @@ static int qca_setup(struct hci_uart *hu)
>  		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
>  		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>  		hu->hdev->shutdown = qca_power_off;
> -		ret = qca_wcn3990_init(hu);
> -		if (ret)
> -			return ret;
> 
>  		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
>  		if (ret)