| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMzD94SDk=y5=hpcYOUYnKnqpQbFCyNu-FiXatJPisancvr7gw@mail.gmail.com>
Date: Tue, 14 Jan 2020 15:49:14 -0800
From: Brian Vazquez <brianvv@...gle.com>
To: Yonghong Song <yhs@...com>
Cc: Brian Vazquez <brianvv.kernel@...il.com>,
Alexei Starovoitov <ast@...nel.org>,
Daniel Borkmann <daniel@...earbox.net>,
"David S . Miller" <davem@...emloft.net>,
Andrii Nakryiko <andrii.nakryiko@...il.com>,
Stanislav Fomichev <sdf@...gle.com>,
Petar Penkov <ppenkov@...gle.com>,
Willem de Bruijn <willemb@...gle.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"bpf@...r.kernel.org" <bpf@...r.kernel.org>
Subject: Re: [PATCH v4 bpf-next 5/9] bpf: add batch ops to all htab bpf map
Hi Yonghong, thanks for reviewing it!
On Tue, Jan 14, 2020 at 2:56 PM Yonghong Song <yhs@...com> wrote:
>
>
>
> On 1/14/20 8:46 AM, Brian Vazquez wrote:
> > From: Yonghong Song <yhs@...com>
> >
> > htab can't use generic batch support due some problematic behaviours
> > inherent to the data structre, i.e. while iterating the bpf map a
> > concurrent program might delete the next entry that batch was about to
> > use, in that case there's no easy solution to retrieve the next entry,
> > the issue has been discussed multiple times (see [1] and [2]).
> >
> > The only way hmap can be traversed without the problem previously
> > exposed is by making sure that the map is traversing entire buckets.
> > This commit implements those strict requirements for hmap, the
> > implementation follows the same interaction that generic support with
> > some exceptions:
> >
> > - If keys/values buffer are not big enough to traverse a bucket,
> > ENOSPC will be returned.
> > - out_batch contains the value of the next bucket in the iteration, not
> > the next key, but this is transparent for the user since the user
> > should never use out_batch for other than bpf batch syscalls.
> >
> > This commits implements BPF_MAP_LOOKUP_BATCH and adds support for new
> > command BPF_MAP_LOOKUP_AND_DELETE_BATCH. Note that for update/delete
> > batch ops it is possible to use the generic implementations.
> >
> > [1] https://lore.kernel.org/bpf/20190724165803.87470-1-brianvv@google.com/
> > [2] https://lore.kernel.org/bpf/20190906225434.3635421-1-yhs@fb.com/
> >
> > Signed-off-by: Yonghong Song <yhs@...com>
> > Signed-off-by: Brian Vazquez <brianvv@...gle.com>
> > ---
> > include/linux/bpf.h | 3 +
> > include/uapi/linux/bpf.h | 1 +
> > kernel/bpf/hashtab.c | 258 +++++++++++++++++++++++++++++++++++++++
> > kernel/bpf/syscall.c | 9 +-
> > 4 files changed, 270 insertions(+), 1 deletion(-)
> >
> > diff --git a/include/linux/bpf.h b/include/linux/bpf.h
> > index 05466ad6cf1c5..3517e32149a4f 100644
> > --- a/include/linux/bpf.h
> > +++ b/include/linux/bpf.h
> > @@ -46,6 +46,9 @@ struct bpf_map_ops {
> > void *(*map_lookup_elem_sys_only)(struct bpf_map *map, void *key);
> > int (*map_lookup_batch)(struct bpf_map *map, const union bpf_attr *attr,
> > union bpf_attr __user *uattr);
> > + int (*map_lookup_and_delete_batch)(struct bpf_map *map,
> > + const union bpf_attr *attr,
> > + union bpf_attr __user *uattr);
> > int (*map_update_batch)(struct bpf_map *map, const union bpf_attr *attr,
> > union bpf_attr __user *uattr);
> > int (*map_delete_batch)(struct bpf_map *map, const union bpf_attr *attr,
> > diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
> > index e8df9ca680e0c..9536729a03d57 100644
> > --- a/include/uapi/linux/bpf.h
> > +++ b/include/uapi/linux/bpf.h
> > @@ -108,6 +108,7 @@ enum bpf_cmd {
> > BPF_MAP_FREEZE,
> > BPF_BTF_GET_NEXT_ID,
> > BPF_MAP_LOOKUP_BATCH,
> > + BPF_MAP_LOOKUP_AND_DELETE_BATCH,
> > BPF_MAP_UPDATE_BATCH,
> > BPF_MAP_DELETE_BATCH,
> > };
> > diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c
> > index 22066a62c8c97..d9888acfd632b 100644
> > --- a/kernel/bpf/hashtab.c
> > +++ b/kernel/bpf/hashtab.c
> > @@ -17,6 +17,16 @@
> > (BPF_F_NO_PREALLOC | BPF_F_NO_COMMON_LRU | BPF_F_NUMA_NODE | \
> > BPF_F_ACCESS_MASK | BPF_F_ZERO_SEED)
> >
> > +#define BATCH_OPS(_name) \
> > + .map_lookup_batch = \
> > + _name##_map_lookup_batch, \
> > + .map_lookup_and_delete_batch = \
> > + _name##_map_lookup_and_delete_batch, \
> > + .map_update_batch = \
> > + generic_map_update_batch, \
> > + .map_delete_batch = \
> > + generic_map_delete_batch
> > +
> > struct bucket {
> > struct hlist_nulls_head head;
> > raw_spinlock_t lock;
> > @@ -1232,6 +1242,250 @@ static void htab_map_seq_show_elem(struct bpf_map *map, void *key,
> > rcu_read_unlock();
> > }
> >
> > +static int
> > +__htab_map_lookup_and_delete_batch(struct bpf_map *map,
> > + const union bpf_attr *attr,
> > + union bpf_attr __user *uattr,
> > + bool do_delete, bool is_lru_map,
> > + bool is_percpu)
> > +{
> > + struct bpf_htab *htab = container_of(map, struct bpf_htab, map);
> > + u32 bucket_cnt, total, key_size, value_size, roundup_key_size;
> > + void *keys = NULL, *values = NULL, *value, *dst_key, *dst_val;
> > + void __user *uvalues = u64_to_user_ptr(attr->batch.values);
> > + void __user *ukeys = u64_to_user_ptr(attr->batch.keys);
> > + void *ubatch = u64_to_user_ptr(attr->batch.in_batch);
> > + u32 batch, max_count, size, bucket_size;
> > + u64 elem_map_flags, map_flags;
> > + struct hlist_nulls_head *head;
> > + struct hlist_nulls_node *n;
> > + unsigned long flags;
> > + struct htab_elem *l;
> > + struct bucket *b;
> > + int ret = 0;
> > +
> > + elem_map_flags = attr->batch.elem_flags;
> > + if ((elem_map_flags & ~BPF_F_LOCK) ||
> > + ((elem_map_flags & BPF_F_LOCK) && !map_value_has_spin_lock(map)))
> > + return -EINVAL;
> > +
> > + map_flags = attr->batch.flags;
> > + if (map_flags)
> > + return -EINVAL;
> > +
> > + max_count = attr->batch.count;
> > + if (!max_count)
> > + return 0;
> > +
> > + batch = 0;
> > + if (ubatch && copy_from_user(&batch, ubatch, sizeof(batch)))
> > + return -EFAULT;
> > +
> > + if (batch >= htab->n_buckets)
> > + return -ENOENT;
> > +
> > + key_size = htab->map.key_size;
> > + roundup_key_size = round_up(htab->map.key_size, 8);
> > + value_size = htab->map.value_size;
> > + size = round_up(value_size, 8);
> > + if (is_percpu)
> > + value_size = size * num_possible_cpus();
> > + total = 0;
> > + bucket_size = 1;
>
> Have you checked typical hash table linklist length?
While testing with hash tables ranging from 10 to 1000 entries I saw
linked lists of upto 5 entries.
> Maybe initial value bucket_size = 2 is able to cover most common cases?
I think 4-5 is still a reasonable number, what do you think?
>
> > +
> > +alloc:
> > + /* We cannot do copy_from_user or copy_to_user inside
> > + * the rcu_read_lock. Allocate enough space here.
> > + */
> > + keys = kvmalloc(key_size * bucket_size, GFP_USER | __GFP_NOWARN);
> > + values = kvmalloc(value_size * bucket_size, GFP_USER | __GFP_NOWARN);
> > + if (!keys || !values) {
> > + ret = -ENOMEM;
> > + goto out;
>
> In this case, we won't copy batch and total to user buffer. Maybe we
> should do that?
Yes, I think last line should be: goto after_loop;
>
>
> > + }
> > +
> > +again:
> > + preempt_disable();
> > + this_cpu_inc(bpf_prog_active);
> > + rcu_read_lock();
> > +again_nocopy:
> > + dst_key = keys;
> > + dst_val = values;
> > + b = &htab->buckets[batch];
> > + head = &b->head;
> > + raw_spin_lock_irqsave(&b->lock, flags);
> > +
> > + bucket_cnt = 0;
> > + hlist_nulls_for_each_entry_rcu(l, n, head, hash_node)
> > + bucket_cnt++;
> > +
> > + if (bucket_cnt > (max_count - total)) {
> > + if (total == 0)
> > + ret = -ENOSPC;
> > + raw_spin_unlock_irqrestore(&b->lock, flags);
> > + rcu_read_unlock();
> > + this_cpu_dec(bpf_prog_active);
> > + preempt_enable();
> > + goto after_loop;
> > + }
> > +
> > + if (bucket_cnt > bucket_size) {
> > + bucket_size = bucket_cnt;
> > + raw_spin_unlock_irqrestore(&b->lock, flags);
> > + rcu_read_unlock();
> > + this_cpu_dec(bpf_prog_active);
> > + preempt_enable();
> > + kvfree(keys);
> > + kvfree(values);
> > + goto alloc;
> > + }
> > +
> > + hlist_nulls_for_each_entry_safe(l, n, head, hash_node) {
> > + memcpy(dst_key, l->key, key_size);
> > +
> > + if (is_percpu) {
> > + int off = 0, cpu;
> > + void __percpu *pptr;
> > +
> > + pptr = htab_elem_get_ptr(l, map->key_size);
> > + for_each_possible_cpu(cpu) {
> > + bpf_long_memcpy(dst_val + off,
> > + per_cpu_ptr(pptr, cpu), size);
> > + off += size;
> > + }
> > + } else {
> > + value = l->key + roundup_key_size;
> > + if (elem_map_flags & BPF_F_LOCK)
> > + copy_map_value_locked(map, dst_val, value,
> > + true);
> > + else
> > + copy_map_value(map, dst_val, value);
> > + check_and_init_map_lock(map, dst_val);
> > + }
> > + if (do_delete) {
> > + hlist_nulls_del_rcu(&l->hash_node);
> > + if (is_lru_map)
> > + bpf_lru_push_free(&htab->lru, &l->lru_node);
> > + else
> > + free_htab_elem(htab, l);
> > + }
> > + dst_key += key_size;
> > + dst_val += value_size;
> > + }
> > +
> > + raw_spin_unlock_irqrestore(&b->lock, flags);
> > + /* If we are not copying data, we can go to next bucket and avoid
> > + * unlocking the rcu.
> > + */
> > + if (!bucket_cnt && (batch + 1 < htab->n_buckets)) {
> > + batch++;
> > + goto again_nocopy;
> > + }
> > +
> > + rcu_read_unlock();
> > + this_cpu_dec(bpf_prog_active);
> > + preempt_enable();
> > + if (bucket_cnt && (copy_to_user(ukeys + total * key_size, keys,
> > + key_size * bucket_cnt) ||
> > + copy_to_user(uvalues + total * value_size, values,
> > + value_size * bucket_cnt))) {
> > + ret = -EFAULT;
> > + goto after_loop;
> > + }
> > +
> > + total += bucket_cnt;
> > + batch++;
> > + if (batch >= htab->n_buckets) {
> > + ret = -ENOENT;
> > + goto after_loop;
> > + }
> > + goto again;
> > +
> > +after_loop:
> > + if (ret && (ret != -ENOENT && ret != -EFAULT))
> > + goto out;
>
> We won't have many error codes reaching here, -ENOENT, -EFAULT, -ENOSPC,
> and possibly -ENOMEM.
> Maybe just
> if (ret == -EFAULT)
> goto out;
>
Yes I think that make senses, I only need to add
if (put_user(0, &uattr->batch.count))
return -EFAULT;
before traversing the map to make sure that if there is an error,
batch.count doesn't miss report entries since that variable is used as
input/output. Does this make sense?
> > +
> > + /* copy # of entries and next batch */
> > + ubatch = u64_to_user_ptr(attr->batch.out_batch);
> > + if (copy_to_user(ubatch, &batch, sizeof(batch)) ||
> > + put_user(total, &uattr->batch.count))
> > + ret = -EFAULT;
> > +
> > +out:
> > + kvfree(keys);
> > + kvfree(values);
> > + return ret;
> > +}
> > +
> [...]
Powered by blists - more mailing lists