linux-kernel - [PATCH v2] mmc: sdhci: fix minimum clock rate for v3 controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <36180c2b31b154b482892d6c7a3c6d5f386a6a73.1579077085.git.mirq-linux@rere.qmqm.pl>
Date:   Wed, 15 Jan 2020 09:32:16 +0100
From:   Michał Mirosław <mirq-linux@...e.qmqm.pl>
To:     Adrian Hunter <adrian.hunter@...el.com>,
        Ulf Hansson <ulf.hansson@...aro.org>
Cc:     linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] mmc: sdhci: fix minimum clock rate for v3 controller

For SDHCIv3+ with programmable clock mode, minimal clock frequency is
still base clock / max(divider). Minimal programmable clock frequency is
always greater than minimal divided clock frequency. Without this patch,
SDHCI uses out-of-spec initial frequency when multiplier is big enough:

mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz
[for 480 MHz source clock divided by 1024]

The code in sdhci_calc_clk() already chooses a correct SDCLK clock source.

Cc: stable@...r.kernel.org
Fixes: c3ed3877625f ("mmc: sdhci: add support for programmable clock mode")
Signed-off-by: Michał Mirosław <mirq-linux@...e.qmqm.pl>
---
 v2: extend commitmsg and add comment
---
 drivers/mmc/host/sdhci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 96609c961465..fde510c55c89 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3903,11 +3903,11 @@ int sdhci_setup_host(struct sdhci_host *host)
 	if (host->ops->get_min_clock)
 		mmc->f_min = host->ops->get_min_clock(host);
 	else if (host->version >= SDHCI_SPEC_300) {
-		if (host->clk_mul) {
-			mmc->f_min = (host->max_clk * host->clk_mul) / 1024;
+		if (host->clk_mul)
 			max_clk = host->max_clk * host->clk_mul;
-		} else
-			mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
+		/* minimal divided clock rate is always less than minimal
+		 * programmable clock rate */
+		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
 	} else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
 
-- 
2.20.1