lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <dfd1b22bdee5544bf0704936805716ad4f34b44f.camel@fi.rohmeurope.com>
Date:   Wed, 15 Jan 2020 08:34:57 +0000
From:   "Vaittinen, Matti" <Matti.Vaittinen@...rohmeurope.com>
To:     "lee.jones@...aro.org" <lee.jones@...aro.org>
CC:     "dmurphy@...com" <dmurphy@...com>,
        "linux-leds@...r.kernel.org" <linux-leds@...r.kernel.org>,
        "linux-rtc@...r.kernel.org" <linux-rtc@...r.kernel.org>,
        "linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>,
        "mazziesaccount@...il.com" <mazziesaccount@...il.com>,
        "mturquette@...libre.com" <mturquette@...libre.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "jacek.anaszewski@...il.com" <jacek.anaszewski@...il.com>,
        "linus.walleij@...aro.org" <linus.walleij@...aro.org>,
        "a.zummo@...ertech.it" <a.zummo@...ertech.it>,
        "lgirdwood@...il.com" <lgirdwood@...il.com>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "bgolaszewski@...libre.com" <bgolaszewski@...libre.com>,
        "linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
        "sboyd@...nel.org" <sboyd@...nel.org>,
        "pavel@....cz" <pavel@....cz>,
        "broonie@...nel.org" <broonie@...nel.org>
Subject: Re: [PATCH v8 08/12] regulator: bd718x7: Split driver to common and
 bd718x7 specific parts


On Wed, 2020-01-15 at 08:29 +0000, Lee Jones wrote:
> On Mon, 13 Jan 2020, Lee Jones wrote:
> > On Mon, 13 Jan 2020, Vaittinen, Matti wrote:
> > > On Mon, 2020-01-13 at 10:53 +0000, Lee Jones wrote:
> > > > On Wed, 08 Jan 2020, Vaittinen, Matti wrote:
> > > > > On Tue, 2020-01-07 at 12:41 +0000, Lee Jones wrote:
> > > > > > On Mon, 30 Dec 2019, Matti Vaittinen wrote:
> > > > > > 
> > > > > > > Few ROHM PMICs allow setting the voltage states for
> > > > > > > different
> > > > > > > system states
> > > > > > > like RUN, IDLE, SUSPEND and LPSR. States are then changed
> > > > > > > via
> > > > > > > SoC
> > > > > > > specific
> > > > > > > mechanisms. bd718x7 driver implemented device-tree
> > > > > > > parsing
> > > > > > > functions for
> > > > > > > these state specific voltages. The parsing functions can
> > > > > > > be re-
> > > > > > > used 
> > > > > > > by
> > > > > > > other ROHM chip drivers like bd71828. Split the generic
> > > > > > > functions
> > > > > > > from
> > > > > > > bd718x7-regulator.c to rohm-regulator.c and export them
> > > > > > > for
> > > > > > > other
> > > > > > > modules
> > > > > > > to use.
> > > > > > > 
> > > > > > > Signed-off-by: Matti Vaittinen <
> > > > > > > matti.vaittinen@...rohmeurope.com>
> > > > > > > Acked-by: Mark Brown <broonie@...nel.org>
> > > > > > > ---
> > > > 
> > > > [...]
> > > > 
> > > > > > > +#if IS_ENABLED(CONFIG_REGULATOR_ROHM)
> > > > > > > +int rohm_regulator_set_dvs_levels(const struct
> > > > > > > rohm_dvs_config
> > > > > > > *dvs,
> > > > > > > +				  struct device_node *np,
> > > > > > > +				  const struct regulator_desc
> > > > > > > *desc,
> > > > > > > +				  struct regmap *regmap);
> > > > > > 
> > > > > > Does these really need to live in the parent's header file?
> > > > > 
> > > > > I don't know what would be a better place?
> > > > 
> > > > You don't have a regulator header file?
> > > > 
> > > > It seems over-kill to create one for this, so leave it as is.
> > > > 
> > > > > > What other call-sites are there?
> > > > > 
> > > > > After this series the bd718x7-regulator.c and bd71828-
> > > > > regulator.c
> > > > > are
> > > > > the in-tree drivers using these. rohm-regulator.c is
> > > > > implementing
> > > > > them.
> > > > > And I hope we see yet another driver landing in later this
> > > > > year. 
> > > > > 
> > > > > Anyways, I will investigate if I can switch this to some
> > > > > common
> > > > > (not
> > > > > rohm specific) DT bindings at some point (I've scheduled this
> > > > > study
> > > > > to
> > > > > March) - If I can then they should live in regulator core
> > > > > headers.
> > > > > 
> > > > > But changing the existing properties should again be own set
> > > > > of
> > > > > patches
> > > > > and I'd prefer doing that work independently of this series
> > > > > and not
> > > > > delaying the BD71828 due to not-yet-evaluated bd718x7
> > > > > property
> > > > > changes.
> > > > 
> > > > That's fine.
> > > 
> > > Glad to hear :) By the way, I already sent the v9 ;)
> > 
> > It's in my queue.
> 
> Although you didn't submit the whole set to me, so I only have a few
> of the patches.  Why did you choose to do that this time?

Sorry Lee. I have not dropped you intentionally! I will resend the
series.

Br,
	Matti Vaittinen


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ