| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e5aaf19b-6f9d-c9f7-cc42-5948cafe1f2f@intel.com>
Date: Wed, 15 Jan 2020 12:55:12 +0200
From: Adrian Hunter <adrian.hunter@...el.com>
To: Faiz Abbas <faiz_abbas@...com>, linux-omap@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-mmc@...r.kernel.org
Cc: kishon@...com, mark.rutland@....com, robh+dt@...nel.org,
ulf.hansson@...aro.org, tony@...mide.com
Subject: Re: [PATCH v4 02/11] mmc: sdhci: Factor out some operations set to
their own functions
On 6/01/20 1:01 pm, Faiz Abbas wrote:
> In preparation for adding external dma support, factor out data initialization,
> block info and mrq_done to their own functions.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@...com>
Minor changes below, otherwise:
Acked-by: Adrian Hunter <adrian.hunter@...el.com>
> ---
> drivers/mmc/host/sdhci.c | 96 +++++++++++++++++++++++-----------------
> 1 file changed, 55 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 1b1c26da3fe0..f6999054abcf 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1025,18 +1025,9 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> }
> }
>
> -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> +static void sdhci_initialize_data(struct sdhci_host *host,
> + struct mmc_data *data)
> {
> - struct mmc_data *data = cmd->data;
> -
> - host->data_timeout = 0;
> -
> - if (sdhci_data_line_cmd(cmd))
> - sdhci_set_timeout(host, cmd);
> -
> - if (!data)
> - return;
> -
> WARN_ON(host->data);
>
> /* Sanity checks */
> @@ -1048,6 +1039,36 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> host->data_early = 0;
> host->data->bytes_xfered = 0;
>
Unnessary blank line
> +}
> +
> +static inline void sdhci_set_block_info(struct sdhci_host *host,
> + struct mmc_data *data)
> +{
> +
> + /* Set the DMA boundary value and block size */
> + sdhci_writew(host,
> + SDHCI_MAKE_BLKSZ(host->sdma_boundary, host->data->blksz),
host->data -> data
> + SDHCI_BLOCK_SIZE);
> + /*
> + * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count
> + * can be supported, in that case 16-bit block count register must be 0.
> + */
> + if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
> + (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
> + if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
> + sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
> + sdhci_writew(host, host->data->blocks, SDHCI_32BIT_BLK_CNT);
host->data -> data
> + } else {
> + sdhci_writew(host, host->data->blocks, SDHCI_BLOCK_COUNT);
host->data -> data
> + }
> +}
> +
> +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> +{
> + struct mmc_data *data = cmd->data;
> +
> + sdhci_initialize_data(host, data);
> +
> if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
> struct scatterlist *sg;
> unsigned int length_mask, offset_mask;
> @@ -1133,22 +1154,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
>
> sdhci_set_transfer_irqs(host);
>
> - /* Set the DMA boundary value and block size */
> - sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz),
> - SDHCI_BLOCK_SIZE);
> -
> - /*
> - * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count
> - * can be supported, in that case 16-bit block count register must be 0.
> - */
> - if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
> - (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) {
> - if (sdhci_readw(host, SDHCI_BLOCK_COUNT))
> - sdhci_writew(host, 0, SDHCI_BLOCK_COUNT);
> - sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT);
> - } else {
> - sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
> - }
> + sdhci_set_block_info(host, data);
> }
>
> static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
> @@ -1245,22 +1251,10 @@ static bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq)
> (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)));
> }
>
> -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> +static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq)
> {
> int i;
>
> - if (host->cmd && host->cmd->mrq == mrq)
> - host->cmd = NULL;
> -
> - if (host->data_cmd && host->data_cmd->mrq == mrq)
> - host->data_cmd = NULL;
> -
> - if (host->data && host->data->mrq == mrq)
> - host->data = NULL;
> -
> - if (sdhci_needs_reset(host, mrq))
> - host->pending_reset = true;
> -
> for (i = 0; i < SDHCI_MAX_MRQS; i++) {
> if (host->mrqs_done[i] == mrq) {
> WARN_ON(1);
> @@ -1276,6 +1270,23 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> }
>
> WARN_ON(i >= SDHCI_MAX_MRQS);
> +}
> +
> +static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> +{
> + if (host->cmd && host->cmd->mrq == mrq)
> + host->cmd = NULL;
> +
> + if (host->data_cmd && host->data_cmd->mrq == mrq)
> + host->data_cmd = NULL;
> +
> + if (host->data && host->data->mrq == mrq)
> + host->data = NULL;
> +
> + if (sdhci_needs_reset(host, mrq))
> + host->pending_reset = true;
> +
> + sdhci_set_mrq_done(host, mrq);
>
> sdhci_del_timer(host, mrq);
>
> @@ -1390,12 +1401,15 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> }
>
> host->cmd = cmd;
> + host->data_timeout = 0;
> if (sdhci_data_line_cmd(cmd)) {
> WARN_ON(host->data_cmd);
> host->data_cmd = cmd;
> + sdhci_set_timeout(host, cmd);
> }
>
> - sdhci_prepare_data(host, cmd);
> + if (cmd->data)
> + sdhci_prepare_data(host, cmd);
>
> sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
>
>
Powered by blists - more mailing lists