| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200115125951.3677-1-tbogendoerfer@suse.de>
Date: Wed, 15 Jan 2020 13:59:50 +0100
From: Thomas Bogendoerfer <tbogendoerfer@...e.de>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
linux-kernel@...r.kernel.org, linux-input@...r.kernel.org
Subject: [PATCH] Input: add IOC3 serio driver
This patch adds a platform driver for supporting keyboard and mouse
interface of SGI IOC3 chips.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@...e.de>
---
drivers/input/serio/Kconfig | 10 ++
drivers/input/serio/Makefile | 1 +
drivers/input/serio/ioc3kbd.c | 183 ++++++++++++++++++++++++++++++++++
3 files changed, 194 insertions(+)
create mode 100644 drivers/input/serio/ioc3kbd.c
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index f3e18f8ef9ca..373a1646019e 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -165,6 +165,16 @@ config SERIO_MACEPS2
To compile this driver as a module, choose M here: the
module will be called maceps2.
+config SERIO_SGI_IOC3
+ tristate "SGI IOC3 PS/2 controller"
+ depends on SGI_MFD_IOC3
+ help
+ Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
+ and you want to attach and use a keyboard, mouse, or both.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ioc3kbd.
+
config SERIO_LIBPS2
tristate "PS/2 driver library"
depends on SERIO_I8042 || SERIO_I8042=n
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
index 67950a5ccb3f..6d97bad7b844 100644
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_HIL_MLC) += hp_sdc_mlc.o hil_mlc.o
obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o
obj-$(CONFIG_SERIO_PS2MULT) += ps2mult.o
obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o
+obj-$(CONFIG_SERIO_SGI_IOC3) += ioc3kbd.o
obj-$(CONFIG_SERIO_LIBPS2) += libps2.o
obj-$(CONFIG_SERIO_RAW) += serio_raw.o
obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o
diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
new file mode 100644
index 000000000000..814ca640732f
--- /dev/null
+++ b/drivers/input/serio/ioc3kbd.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IOC3 PS/2 controller driver for linux
+ *
+ * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@...e.de>
+ *
+ * Based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@...ligned.org>
+ * Copyright (C) 2009 Johannes Dickgreber <tanzy@....de>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/sn/ioc3.h>
+
+struct ioc3kbd_data {
+ struct ioc3_serioregs __iomem *regs;
+ struct serio *kbd, *aux;
+ int irq;
+};
+
+static int ioc3kbd_wait(struct ioc3_serioregs __iomem *regs, u32 mask)
+{
+ unsigned long timeout = 0;
+
+ while ((readl(®s->km_csr) & mask) && (timeout < 250)) {
+ udelay(50);
+ timeout++;
+ }
+ return (timeout >= 250) ? -ETIMEDOUT : 0;
+}
+
+static int ioc3kbd_write(struct serio *dev, u8 val)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+ int ret;
+
+ ret = ioc3kbd_wait(d->regs, KM_CSR_K_WRT_PEND);
+ if (ret)
+ return ret;
+
+ writel(val, &d->regs->k_wd);
+
+ return 0;
+}
+
+static int ioc3aux_write(struct serio *dev, u8 val)
+{
+ struct ioc3kbd_data *d = dev->port_data;
+ int ret;
+
+ ret = ioc3kbd_wait(d->regs, KM_CSR_M_WRT_PEND);
+ if (ret)
+ return ret;
+
+ writel(val, &d->regs->m_wd);
+
+ return 0;
+}
+
+static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
+{
+ struct ioc3kbd_data *d = dev_id;
+ u32 data_k, data_m;
+
+ data_k = readl(&d->regs->k_rd);
+ data_m = readl(&d->regs->m_rd);
+
+ if (data_k & KM_RD_VALID_0)
+ serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_0_SHIFT) & 0xff,
+ 0);
+ if (data_k & KM_RD_VALID_1)
+ serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_1_SHIFT) & 0xff,
+ 0);
+ if (data_k & KM_RD_VALID_2)
+ serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_2_SHIFT) & 0xff,
+ 0);
+ if (data_m & KM_RD_VALID_0)
+ serio_interrupt(d->aux, (data_m >> KM_RD_DATA_0_SHIFT) & 0xff,
+ 0);
+ if (data_m & KM_RD_VALID_1)
+ serio_interrupt(d->aux, (data_m >> KM_RD_DATA_1_SHIFT) & 0xff,
+ 0);
+ if (data_m & KM_RD_VALID_2)
+ serio_interrupt(d->aux, (data_m >> KM_RD_DATA_2_SHIFT) & 0xff,
+ 0);
+
+ return IRQ_HANDLED;
+}
+
+static int ioc3kbd_probe(struct platform_device *pdev)
+{
+ struct ioc3_serioregs __iomem *regs;
+ struct device *dev = &pdev->dev;
+ struct ioc3kbd_data *d;
+ struct serio *sk, *sa;
+ int irq, ret;
+
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENXIO;
+
+ d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ sk = kzalloc(sizeof(*sk), GFP_KERNEL);
+ if (!sk)
+ return -ENOMEM;
+
+ sa = kzalloc(sizeof(*sa), GFP_KERNEL);
+ if (!sa) {
+ kfree(sk);
+ return -ENOMEM;
+ }
+
+ sk->id.type = SERIO_8042;
+ sk->write = ioc3kbd_write;
+ snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
+ snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
+ sk->port_data = d;
+ sk->dev.parent = dev;
+
+ sa->id.type = SERIO_8042;
+ sa->write = ioc3aux_write;
+ snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
+ snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
+ sa->port_data = d;
+ sa->dev.parent = dev;
+
+ d->regs = regs;
+ d->kbd = sk;
+ d->aux = sa;
+ d->irq = irq;
+
+ platform_set_drvdata(pdev, d);
+ serio_register_port(d->kbd);
+ serio_register_port(d->aux);
+
+ ret = request_irq(irq, ioc3kbd_intr, IRQF_SHARED, "ioc3-kbd", d);
+ if (ret) {
+ dev_err(dev, "could not request IRQ %d\n", irq);
+ serio_unregister_port(d->kbd);
+ serio_unregister_port(d->aux);
+ return ret;
+ }
+
+ /* enable ports */
+ writel(KM_CSR_K_CLAMP_3 | KM_CSR_M_CLAMP_3, ®s->km_csr);
+
+ return 0;
+}
+
+static int ioc3kbd_remove(struct platform_device *pdev)
+{
+ struct ioc3kbd_data *d = platform_get_drvdata(pdev);
+
+ free_irq(d->irq, d);
+ serio_unregister_port(d->kbd);
+ serio_unregister_port(d->aux);
+ return 0;
+}
+
+static struct platform_driver ioc3kbd_driver = {
+ .probe = ioc3kbd_probe,
+ .remove = ioc3kbd_remove,
+ .driver = {
+ .name = "ioc3-kbd",
+ },
+};
+module_platform_driver(ioc3kbd_driver);
+
+MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@...e.de>");
+MODULE_DESCRIPTION("SGI IOC3 serio driver");
+MODULE_LICENSE("GPL");
--
2.24.1
Powered by blists - more mailing lists