[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200115141333.1222676-16-bryan.odonoghue@linaro.org>
Date: Wed, 15 Jan 2020 14:13:29 +0000
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
gregkh@...uxfoundation.org, jackp@...eaurora.org, balbi@...nel.org,
bjorn.andersson@...aro.org
Cc: linux-kernel@...r.kernel.org,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>, devicetree@...r.kernel.org
Subject: [PATCH 15/19] arm64: dts: qcom: qcs404-evb: Define USB ID pin
The USB ID pin is used to tell if a system is a Host or a Device. For our
purposes we will bind this pin into gpio-usb-conn later.
For now define the pin with its pinmux.
Cc: Andy Gross <agross@...nel.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: linux-arm-msm@...r.kernel.org
Cc: devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
---
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index b6147b5ab5cb..abfb2a9a37e9 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -270,6 +270,20 @@ rclk {
bias-pull-down;
};
};
+
+ usb3_id_pin: usb3-id-pin {
+ pinmux {
+ pins = "gpio116";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio116";
+ drive-strength = <2>;
+ bias-pull-up;
+ input-enable;
+ };
+ };
};
&pms405_gpios {
--
2.24.0
Powered by blists - more mailing lists