lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200115141333.1222676-15-bryan.odonoghue@linaro.org>
Date:   Wed, 15 Jan 2020 14:13:28 +0000
From:   Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To:     linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
        gregkh@...uxfoundation.org, jackp@...eaurora.org, balbi@...nel.org,
        bjorn.andersson@...aro.org
Cc:     linux-kernel@...r.kernel.org,
        Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>, devicetree@...r.kernel.org
Subject: [PATCH 14/19] arm64: dts: qcom: qcs404-evb: Define VBUS boost pin

An external regulator is used to trigger VBUS on/off via GPIO. This patch
defines the relevant GPIO in the EVB dts.

Cc: Andy Gross <agross@...nel.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
Cc: linux-arm-msm@...r.kernel.org
Cc: devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
---
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 6d53dc342f97..b6147b5ab5cb 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -273,6 +273,14 @@ rclk {
 };
 
 &pms405_gpios {
+	usb_vbus_boost_pin: usb-vbus-boost-pin {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <1>;
+		};
+	};
 	usb3_vbus_pin: usb3-vbus-pin {
 		pinconf {
 			pins = "gpio12";
-- 
2.24.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ