linux-kernel - [PATCH V5 0/5] Add minimal boot support for IPQ6018

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1579160701-32408-1-git-send-email-sricharan@codeaurora.org>
Date:   Thu, 16 Jan 2020 13:14:56 +0530
From:   Sricharan R <sricharan@...eaurora.org>
To:     agross@...nel.org, devicetree@...r.kernel.org,
        linus.walleij@...aro.org, linux-arm-kernel@...ts.infradead.org,
        linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-soc@...r.kernel.org,
        robh+dt@...nel.org, sivaprak@...eaurora.org,
        sricharan@...eaurora.org
Subject: [PATCH V5 0/5] Add minimal boot support for IPQ6018

The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers,
Gateways and Access Points.

This series adds minimal board boot support for ipq6018-cp01 board.

[V5]
 * Addressed review comments in pinctrl bindings from Rob.
 * Ran make dt_binding_check with modified patch.
 * Added fixed rate clocks in gcc clock controller node.
 * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
   dependency with,
        https://lkml.org/lkml/2020/1/9/84
[v4]
 * Addressed review comments in pinctrl bindings from Rob.
 * Ran make dt_binding_check and no issues was reported.
 * Deleted absahu email id from patch 4, since its bouncing now.
 * Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build
   dependency with,
	https://lkml.org/lkml/2020/1/9/84

[V3]
 * Removed clock driver and bindings from this patch series, and added them
   as a different series.
 * Removed qpic_padN from pinctrl driver.
 * Addressed review comments in dts, and added the remaining fixed clocks their
 * Fixed review comments in pinctrl bindings

[v2]
 * Splitted dt bindings  and driver into different patches. Added missing bindings
   and some style changes.
 * Added ipq6018 schema
 * Addressed review comments for gcc clock bindings.
 * Removed all clk critical flags, removed 1/1 factor clocks, moved to new
   way of specifying clk parents, and addressed other review comments.
 * Sorted nodes based on address, name, label. Removed unused clock nodes,
   Addressed other review comments.

Sricharan R (5):
  dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
  pinctrl: qcom: Add ipq6018 pinctrl driver
  dt-bindings: qcom: Add ipq6018 bindings
  arm64: dts: Add ipq6018 SoC and CP01 board support
  arm64: defconfig: Enable qcom ipq6018 clock and pinctrl

 Documentation/devicetree/bindings/arm/qcom.yaml    |    8 +
 .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml     |  174 +++
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts       |   30 +
 arch/arm64/boot/dts/qcom/ipq6018.dtsi              |  263 +++++
 arch/arm64/configs/defconfig                       |    3 +
 drivers/pinctrl/qcom/Kconfig                       |   10 +
 drivers/pinctrl/qcom/Makefile                      |    1 +
 drivers/pinctrl/qcom/pinctrl-ipq6018.c             | 1107 ++++++++++++++++++++
 9 files changed, 1597 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
 create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
 create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c

-- 
1.9.1