linux-kernel - [PATCH 5.4 007/203] mtd: rawnand: stm32

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 17 Jan 2020 00:15:24 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Christophe Kerello <christophe.kerello@...com>,
        Miquel Raynal <miquel.raynal@...tlin.com>
Subject: [PATCH 5.4 007/203] mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus

From: Christophe Kerello <christophe.kerello@...com>

commit 4114b17af41272e14939b000ce8f3ed7ba937e3c upstream.

We are currently using nand_soft_waitrdy to poll the status of the NAND
flash. FMC2 enables the wait feature bit (this feature is mandatory for
the sequencer mode). By enabling this feature, we can't poll the status
of the NAND flash, the read status command is stucked in FMC2 pipeline
until R/B# signal is high, and locks the CPU bus.
To avoid to lock the CPU bus, we poll FMC2 ISR register. This register
reports the status of the R/B# signal.

Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Christophe Kerello <christophe.kerello@...com>
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/mtd/nand/raw/stm32_fmc2_nand.c |   38 +++++++++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -37,6 +37,7 @@
 /* Max ECC buffer length */
 #define FMC2_MAX_ECC_BUF_LEN		(FMC2_BCHDSRS_LEN * FMC2_MAX_SG)
 
+#define FMC2_TIMEOUT_US			1000
 #define FMC2_TIMEOUT_MS			1000
 
 /* Timings */
@@ -53,6 +54,8 @@
 #define FMC2_PMEM			0x88
 #define FMC2_PATT			0x8c
 #define FMC2_HECCR			0x94
+#define FMC2_ISR			0x184
+#define FMC2_ICR			0x188
 #define FMC2_CSQCR			0x200
 #define FMC2_CSQCFGR1			0x204
 #define FMC2_CSQCFGR2			0x208
@@ -118,6 +121,12 @@
 #define FMC2_PATT_ATTHIZ(x)		(((x) & 0xff) << 24)
 #define FMC2_PATT_DEFAULT		0x0a0a0a0a
 
+/* Register: FMC2_ISR */
+#define FMC2_ISR_IHLF			BIT(1)
+
+/* Register: FMC2_ICR */
+#define FMC2_ICR_CIHLF			BIT(1)
+
 /* Register: FMC2_CSQCR */
 #define FMC2_CSQCR_CSQSTART		BIT(0)
 
@@ -1322,6 +1331,31 @@ static void stm32_fmc2_write_data(struct
 		stm32_fmc2_set_buswidth_16(fmc2, true);
 }
 
+static int stm32_fmc2_waitrdy(struct nand_chip *chip, unsigned long timeout_ms)
+{
+	struct stm32_fmc2_nfc *fmc2 = to_stm32_nfc(chip->controller);
+	const struct nand_sdr_timings *timings;
+	u32 isr, sr;
+
+	/* Check if there is no pending requests to the NAND flash */
+	if (readl_relaxed_poll_timeout_atomic(fmc2->io_base + FMC2_SR, sr,
+					      sr & FMC2_SR_NWRF, 1,
+					      FMC2_TIMEOUT_US))
+		dev_warn(fmc2->dev, "Waitrdy timeout\n");
+
+	/* Wait tWB before R/B# signal is low */
+	timings = nand_get_sdr_timings(&chip->data_interface);
+	ndelay(PSEC_TO_NSEC(timings->tWB_max));
+
+	/* R/B# signal is low, clear high level flag */
+	writel_relaxed(FMC2_ICR_CIHLF, fmc2->io_base + FMC2_ICR);
+
+	/* Wait R/B# signal is high */
+	return readl_relaxed_poll_timeout_atomic(fmc2->io_base + FMC2_ISR,
+						 isr, isr & FMC2_ISR_IHLF,
+						 5, 1000 * timeout_ms);
+}
+
 static int stm32_fmc2_exec_op(struct nand_chip *chip,
 			      const struct nand_operation *op,
 			      bool check_only)
@@ -1366,8 +1400,8 @@ static int stm32_fmc2_exec_op(struct nan
 			break;
 
 		case NAND_OP_WAITRDY_INSTR:
-			ret = nand_soft_waitrdy(chip,
-						instr->ctx.waitrdy.timeout_ms);
+			ret = stm32_fmc2_waitrdy(chip,
+						 instr->ctx.waitrdy.timeout_ms);
 			break;
 		}
 	}