| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 16 Jan 2020 19:07:26 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: Kamil Konieczny <k.konieczny@...sung.com>,
linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: leonard.crestez@....com, lukasz.luba@....com, a.swigon@...sung.com,
m.szyprowski@...sung.com, enric.balletbo@...labora.com,
hl@...k-chips.com, digetx@...il.com, bjorn.andersson@...aro.org,
jcrouse@...eaurora.org, chanwoo@...nel.org,
myungjoo.ham@...sung.com, kyungmin.park@...sung.com
Subject: Re: [PATCH v4] PM / devfreq: Add debugfs support with
devfreq_summary file
On 1/16/20 6:53 PM, Kamil Konieczny wrote:
> Hi Chanwoo,
>
> On 16.01.2020 06:03, Chanwoo Choi wrote:
>> Add debugfs interface to provide debugging information of devfreq device.
>> It contains 'devfreq_summary' entry to show the summary of registered
>> devfreq devices as following and the additional debugfs file will be added.
>> - /sys/kernel/debug/devfreq/devfreq_summary
>>
>> [Detailed description of each field of 'devfreq_summary' debugfs file]
>> - dev_name : Device name of h/w.
>> - dev : Device name made by devfreq core.
>> - parent_dev : If devfreq device uses the passive governor,
>> show parent devfreq device name. Otherwise, show 'null'.
>> - governor : Devfreq governor.
>> - polling_ms : If devfreq device uses the simple_ondemand governor,
>> polling_ms is necessary for the period. (unit: millisecond)
>> - cur_freq_Hz : Current Frequency (unit: Hz)
>
> s/Frequency/frequency/
>
>> - old_freq_Hz : Frequency before changing. (unit: Hz)
>
> min_freq_Hz : Minimum frequency (unit Hz)
>
>> - new_freq_Hz : Frequency after changed. (unit: Hz)
>
> max_freq_Hz : Maximum frequency (unit Hz)
Right. Thanks for pointing out.
>
>>
>> [For example on Exynos5422-based Odroid-XU3 board]
>> $ cat /sys/kernel/debug/devfreq/devfreq_summary
>> dev_name dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz
>> ------------------------------ ---------- ---------- --------------- ---------- ------------ ------------ ------------
>> 10c20000.memory-controller devfreq0 null simple_ondemand 0 165000000 165000000 825000000
>> soc:bus_wcore devfreq1 null simple_ondemand 50 532000000 88700000 532000000
>> soc:bus_noc devfreq2 devfreq1 passive 0 111000000 66600000 111000000
>> soc:bus_fsys_apb devfreq3 devfreq1 passive 0 222000000 111000000 222000000
>> soc:bus_fsys devfreq4 devfreq1 passive 0 200000000 75000000 200000000
>> soc:bus_fsys2 devfreq5 devfreq1 passive 0 200000000 75000000 200000000
>> soc:bus_mfc devfreq6 devfreq1 passive 0 333000000 83250000 333000000
>> soc:bus_gen devfreq7 devfreq1 passive 0 266000000 88700000 266000000
>> soc:bus_peri devfreq8 devfreq1 passive 0 66600000 66600000 66600000
>> soc:bus_g2d devfreq9 devfreq1 passive 0 333000000 83250000 333000000
>> soc:bus_g2d_acp devfreq10 devfreq1 passive 0 266000000 66500000 266000000
>> soc:bus_jpeg devfreq11 devfreq1 passive 0 300000000 75000000 300000000
>> soc:bus_jpeg_apb devfreq12 devfreq1 passive 0 166500000 83250000 166500000
>> soc:bus_disp1_fimd devfreq13 devfreq1 passive 0 200000000 120000000 200000000
>> soc:bus_disp1 devfreq14 devfreq1 passive 0 300000000 120000000 300000000
>> soc:bus_gscl_scaler devfreq15 devfreq1 passive 0 300000000 150000000 300000000
>> soc:bus_mscl devfreq16 devfreq1 passive 0 666000000 84000000 666000000
>>
>> [lkp: Reported the build error]
>> Reported-by: kbuild test robot <lkp@...el.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
>> ---
>> Changes from v3:
>> - Remove the unneeded checking of return value when calling debugfs_create_dir
>> - Add missing IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE) condition
>> Changes from v2:
>> - Show 'null' at 'parent_dev' field when governor of devfreq device
>> is not passive
>> Changes from v1:
>> - Drop the patch about 'devfreq_transitions' debugfs file
>> - Modify from 'hz' to 'Hz'
>> - Edit the indentation of 'devfreq_summary' when show summary
>> - Exchange sequence between PTR_ERR and IS_ERR when debugfs_create_dir
>>
>>
>> drivers/devfreq/devfreq.c | 82 +++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 82 insertions(+)
>>
>> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
>> index 89260b17598f..cceee8bc3c2f 100644
>> --- a/drivers/devfreq/devfreq.c
>> +++ b/drivers/devfreq/devfreq.c
>> @@ -10,6 +10,7 @@
>> #include <linux/kernel.h>
>> #include <linux/kmod.h>
>> #include <linux/sched.h>
>> +#include <linux/debugfs.h>
>> #include <linux/errno.h>
>> #include <linux/err.h>
>> #include <linux/init.h>
>> @@ -33,6 +34,7 @@
>> #define HZ_PER_KHZ 1000
>>
>> static struct class *devfreq_class;
>> +static struct dentry *devfreq_debugfs;
>>
>> /*
>> * devfreq core provides delayed work based load monitoring helper
>> @@ -1643,6 +1645,81 @@ static struct attribute *devfreq_attrs[] = {
>> };
>> ATTRIBUTE_GROUPS(devfreq);
>>
>> +/**
>> + * devfreq_summary_show() - Show the summary of the devfreq devices
>> + * @s: seq_file instance to show the summary of devfreq devices
>> + * @data: not used
>> + *
>> + * Show the summary of the devfreq devices via 'devfreq_summary' debugfs file.
>> + * It helps that user can know the detailed information of the devfreq devices.
>> + *
>> + * Return 0 always because it shows the information without any data change.
>> + */
>> +static int devfreq_summary_show(struct seq_file *s, void *data)
>> +{
>> + struct devfreq *devfreq;
>> + struct devfreq *p_devfreq = NULL;
>> + unsigned long cur_freq, min_freq, max_freq;
>> + unsigned int polling_ms;
>> +
>> + seq_printf(s, "%-30s %-10s %-10s %-15s %10s %12s %12s %12s\n",
>> + "dev_name",
>> + "dev",
>> + "parent_dev",
>> + "governor",
>> + "polling_ms",
>> + "cur_freq_Hz",
>> + "min_freq_Hz",
>> + "max_freq_Hz");
>> + seq_printf(s, "%30s %10s %10s %15s %10s %12s %12s %12s\n",
>> + "------------------------------",
>> + "----------",
>> + "----------",
>> + "---------------",
>> + "----------",
>> + "------------",
>> + "------------",
>> + "------------");
>> +
>> + mutex_lock(&devfreq_list_lock);
>> +
>> + list_for_each_entry_reverse(devfreq, &devfreq_list, node) {
>> +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE)
>> + if (!strncmp(devfreq->governor_name, DEVFREQ_GOV_PASSIVE,
>> + DEVFREQ_NAME_LEN)) {
>> + struct devfreq_passive_data *data = devfreq->data;
>> +
>> + if (data)
>> + p_devfreq = data->parent;
>> + } else {
>> + p_devfreq = NULL;
>> + }
>> +#endif
>> +
>> + mutex_lock(&devfreq->lock);
>> + cur_freq = devfreq->previous_freq,
>> + get_freq_range(devfreq, &min_freq, &max_freq);
>> + polling_ms = devfreq->profile->polling_ms,
>> + mutex_unlock(&devfreq->lock);
>> +
>> + seq_printf(s,
>> + "%-30s %-10s %-10s %-15s %10d %12ld %12ld %12ld\n",
>> + dev_name(devfreq->dev.parent),
>> + dev_name(&devfreq->dev),
>> + p_devfreq ? dev_name(&p_devfreq->dev) : "null",
>> + devfreq->governor_name,
>> + polling_ms,
>> + cur_freq,
>> + min_freq,
>> + max_freq);
>> + }
>> +
>> + mutex_unlock(&devfreq_list_lock);
>> +
>> + return 0;
>> +}
>> +DEFINE_SHOW_ATTRIBUTE(devfreq_summary);
>> +
>> static int __init devfreq_init(void)
>> {
>> devfreq_class = class_create(THIS_MODULE, "devfreq");
>> @@ -1659,6 +1736,11 @@ static int __init devfreq_init(void)
>> }
>> devfreq_class->dev_groups = devfreq_groups;
>>
>> + devfreq_debugfs = debugfs_create_dir("devfreq", NULL);
>> + debugfs_create_file("devfreq_summary", 0444,
>> + devfreq_debugfs, NULL,
>> + &devfreq_summary_fops);
>> +
>> return 0;
>> }
>> subsys_initcall(devfreq_init);
>>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
Powered by blists - more mailing lists