linux-kernel - [PATCH v3 0/2] hwmon: (adt7475) Added attenuator bypass support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200117035018.11985-1-logan.shaw@alliedtelesis.co.nz>
Date:   Fri, 17 Jan 2020 16:50:16 +1300
From:   Logan Shaw <logan.shaw@...iedtelesis.co.nz>
To:     linux@...ck-us.net, jdelvare@...e.com, robh+dt@...nel.org
Cc:     linux-hwmon@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, Joshua.Scott@...iedtelesis.co.nz,
        Chris.Packham@...iedtelesis.co.nz, logan.shaw@...iedtelesis.co.nz
Subject: [PATCH v3 0/2] hwmon: (adt7475) Added attenuator bypass support

The ADT7473 and ADT7475 support bypassing voltage input attenuators on
voltage input 1 and the ADT7476 and ADT7490 additionally support
bypassing voltage input attenuators on voltage inputs 0, 3, and 4. This
can be useful to improve measurement resolution when measuring voltages
0 V - 2.25 V.

This patch adds 4 optional devicetree properties to the adt7475
driver, each setting the attenuator bypass (or clearing) on a
specific voltage input.

* v3
- removed the functionality to set the global attenuator bypass.
- added functionality to allow bypassing voltage input 1 on the
	ADT7473 and ADT7475.
- added DTS definition file adt7475.yaml and 4 new properties.
- added the previousely missing newline character to the end of
  	file adt7475.c. 

* v2
- removed sysfs changes from patch
- removed adt7475_write macro from patch and replaced it by using
	the i2c_smbus_write_byte_data function directly in code.
- removed config4_attenuate_index function from patch and replaced it
	by modifying the function  load_individual_bypass_attenuators
	to use hard coded bit values.
- modified function load_individual_bypass_attenuators to use 4 if
	statements, one for each voltage input, replacing the for loop.
- modified function adt7475_probe to check the device is a ADT7476 or
	ADT7490 (other devices do not support bypassing all or
	individual attenuators), and only then set the relevant bits.
- added new file adt7475.txt to document the new devicetree properties.
- removed c++ style comments. 

Logan Shaw (2):
  hwmon: (adt7475) Added attenuator bypass support
  hwmon: (adt7475) Added attenuator bypass support

 .../devicetree/bindings/hwmon/adt7475.yaml    | 90 +++++++++++++++++++
 drivers/hwmon/adt7475.c                       | 76 ++++++++++++++++
 2 files changed, 166 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.yaml

-- 
2.25.0