[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <47c4217fd274b77e2fb5c86812cce883c8ed9bd2.1579164456.git.baolin.wang7@gmail.com>
Date: Fri, 17 Jan 2020 13:24:24 +0800
From: Baolin Wang <baolin.wang7@...il.com>
To: axboe@...nel.dk, paolo.valente@...aro.org, adrian.hunter@...el.com,
ulf.hansson@...aro.org
Cc: zhang.lyra@...il.com, orsonzhai@...il.com, arnd@...db.de,
linus.walleij@...aro.org, baolin.wang7@...il.com,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-block@...r.kernel.org
Subject: [RFC PATCH 5/8] mmc: host: sdhci: Factor out the command configuration
Move the SD command configuration into one separate function to simplify
the sdhci_send_command(). Moreover this function can be used to support
ADMA3 transfer mode in following patches.
Signed-off-by: Baolin Wang <baolin.wang7@...il.com>
---
drivers/mmc/host/sdhci.c | 65 +++++++++++++++++++++++++++-------------------
1 file changed, 38 insertions(+), 27 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 907a35e..f517121 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1350,9 +1350,43 @@ static void sdhci_finish_data(struct sdhci_host *host)
}
}
-void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+static int sdhci_get_command(struct sdhci_host *host, struct mmc_command *cmd)
{
int flags;
+
+ if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
+ pr_err("%s: Unsupported response type!\n",
+ mmc_hostname(host->mmc));
+ cmd->error = -EINVAL;
+ sdhci_finish_mrq(host, cmd->mrq);
+ return -EINVAL;
+ }
+
+ if (!(cmd->flags & MMC_RSP_PRESENT))
+ flags = SDHCI_CMD_RESP_NONE;
+ else if (cmd->flags & MMC_RSP_136)
+ flags = SDHCI_CMD_RESP_LONG;
+ else if (cmd->flags & MMC_RSP_BUSY)
+ flags = SDHCI_CMD_RESP_SHORT_BUSY;
+ else
+ flags = SDHCI_CMD_RESP_SHORT;
+
+ if (cmd->flags & MMC_RSP_CRC)
+ flags |= SDHCI_CMD_CRC;
+ if (cmd->flags & MMC_RSP_OPCODE)
+ flags |= SDHCI_CMD_INDEX;
+
+ /* CMD19 is special in that the Data Present Select should be set */
+ if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
+ cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
+ flags |= SDHCI_CMD_DATA;
+
+ return SDHCI_MAKE_CMD(cmd->opcode, flags);
+}
+
+void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
+{
+ int command;
u32 mask;
unsigned long timeout;
@@ -1402,32 +1436,9 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
sdhci_set_transfer_mode(host, cmd);
- if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
- pr_err("%s: Unsupported response type!\n",
- mmc_hostname(host->mmc));
- cmd->error = -EINVAL;
- sdhci_finish_mrq(host, cmd->mrq);
+ command = sdhci_get_command(host, cmd);
+ if (command < 0)
return;
- }
-
- if (!(cmd->flags & MMC_RSP_PRESENT))
- flags = SDHCI_CMD_RESP_NONE;
- else if (cmd->flags & MMC_RSP_136)
- flags = SDHCI_CMD_RESP_LONG;
- else if (cmd->flags & MMC_RSP_BUSY)
- flags = SDHCI_CMD_RESP_SHORT_BUSY;
- else
- flags = SDHCI_CMD_RESP_SHORT;
-
- if (cmd->flags & MMC_RSP_CRC)
- flags |= SDHCI_CMD_CRC;
- if (cmd->flags & MMC_RSP_OPCODE)
- flags |= SDHCI_CMD_INDEX;
-
- /* CMD19 is special in that the Data Present Select should be set */
- if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
- cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
- flags |= SDHCI_CMD_DATA;
timeout = jiffies;
if (host->data_timeout)
@@ -1438,7 +1449,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
timeout += 10 * HZ;
sdhci_mod_timer(host, cmd->mrq, timeout);
- sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
+ sdhci_writew(host, command, SDHCI_COMMAND);
}
EXPORT_SYMBOL_GPL(sdhci_send_command);
--
1.7.9.5
Powered by blists - more mailing lists