linux-kernel - Re: [PATCH v3] iio: imu/mpu6050: support dual-edge IRQ

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20200118133214.58142508@archlinux>
Date:   Sat, 18 Jan 2020 13:32:14 +0000
From:   Jonathan Cameron <jic23@...nel.org>
To:     Michał Mirosław <mirq-linux@...e.qmqm.pl>
Cc:     Hartmut Knaack <knaack.h@....de>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Peter Meerwald-Stadler <pmeerw@...erw.net>,
        Jean-Baptiste Maneyrol <jmaneyrol@...ensense.com>,
        linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] iio: imu/mpu6050: support dual-edge IRQ

On Sat, 11 Jan 2020 16:19:11 +0100
Michał Mirosław <mirq-linux@...e.qmqm.pl> wrote:

> Make mpu6050 usable on platforms which provide only any-edge interrupts.
> One example of this kind of platform is AT91SAM9G45
> 
> Signed-off-by: Michał Mirosław <mirq-linux@...e.qmqm.pl>
> Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@...ensense.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to see if they can break anything.

Thanks,

Jonathan

> 
> ---
> v3: reword commit message
> v2: just remove the dev_warn() message
> 
> Signed-off-by: Michał Mirosław <mirq-linux@...e.qmqm.pl>
> ---
>  drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 2 +-
>  drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 5 +----
>  2 files changed, 2 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 2261c6c4ac65..4cfdd19ee4fc 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -1118,7 +1118,7 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
>  	irq_type = irqd_get_trigger_type(desc);
>  	if (!irq_type)
>  		irq_type = IRQF_TRIGGER_RISING;
> -	if (irq_type == IRQF_TRIGGER_RISING)
> +	if (irq_type & IRQF_TRIGGER_RISING)	// rising or both-edge
>  		st->irq_mask = INV_MPU6050_ACTIVE_HIGH;
>  	else if (irq_type == IRQF_TRIGGER_FALLING)
>  		st->irq_mask = INV_MPU6050_ACTIVE_LOW;
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> index 72d8c5790076..a8a833f8b99b 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> @@ -180,11 +180,8 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
>  			"failed to ack interrupt\n");
>  		goto flush_fifo;
>  	}
> -	if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT)) {
> -		dev_warn(regmap_get_device(st->map),
> -			"spurious interrupt with status 0x%x\n", int_status);
> +	if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT))
>  		goto end_session;
> -	}
>  
>  	if (!(st->chip_config.accl_fifo_enable |
>  		st->chip_config.gyro_fifo_enable))