linux-kernel - [PATCH v2] arm64: dts: allwinner: a64: Add gpio bank supply for A64-Olinuxino

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <20200118143408.15574-1-manu@freebsd.org>
Date:   Sat, 18 Jan 2020 15:34:08 +0100
From:   Emmanuel Vadot <manu@...ebsd.org>
To:     mripard@...nel.org, wens@...e.org, robh+dt@...nel.org,
        mark.rutland@....com
Cc:     linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Emmanuel Vadot <manu@...ebsd.org>
Subject: [PATCH v2] arm64: dts: allwinner: a64: Add gpio bank supply for A64-Olinuxino

Add the regulators for each bank on this boards.
For VCC-PL only add a comment on what regulator is used. We cannot add
the property without causing a circular dependency as the PL pins are
used to talk to the PMIC.

Signed-off-by: Emmanuel Vadot <manu@...ebsd.org>
---
v2:
 - Remove vcc-pl-supply in r_pio as it cause a circular dependency.

 .../boot/dts/allwinner/sun50i-a64-olinuxino.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 01a9a52edae4..7e71b5b12f98 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -163,6 +163,17 @@ &ohci1 {
 	status = "okay";
 };
 
+&pio {
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -175,6 +186,12 @@ axp803: pmic@3a3 {
 	};
 };
 
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/*	vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
 #include "axp803.dtsi"
 
 &ac_power_supply {
-- 
2.24.1