| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ea9584d47cbec728c942ec2c9d8812b6af15e815.1579406227.git.sathyanarayanan.kuppuswamy@linux.intel.com>
Date: Sat, 18 Jan 2020 20:00:37 -0800
From: sathyanarayanan.kuppuswamy@...ux.intel.com
To: bhelgaas@...gle.com
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
ashok.raj@...el.com, sathyanarayanan.kuppuswamy@...ux.intel.com,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Len Brown <lenb@...nel.org>,
Keith Busch <keith.busch@...el.com>,
Huong Nguyen <huong.nguyen@...l.com>,
Austin Bolen <Austin.Bolen@...l.com>
Subject: [PATCH v13 8/8] PCI/ACPI: Enable EDR support
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
As per PCI firmware specification r3.2 Downstream Port Containment
Related Enhancements ECN, sec 4.5.1, OS must implement following steps
to enable/use EDR feature.
1. OS can use bit 7 of _OSC Control Field to negotiate control over
Downstream Port Containment (DPC) configuration of PCIe port. After _OSC
negotiation, firmware will Set this bit to grant OS control over PCIe
DPC configuration and Clear it if this feature was requested and denied,
or was not requested.
2. Also, if OS supports EDR, it should expose its support to BIOS by
setting bit 7 of _OSC Support Field. And if OS sets bit 7 of _OSC
Control Field it must also expose support for EDR by setting bit 7 of
_OSC Support Field.
Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>
Cc: Len Brown <lenb@...nel.org>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
Acked-by: Keith Busch <keith.busch@...el.com>
Tested-by: Huong Nguyen <huong.nguyen@...l.com>
Tested-by: Austin Bolen <Austin.Bolen@...l.com>
---
drivers/acpi/pci_root.c | 16 ++++++++++++++++
drivers/pci/pcie/portdrv_core.c | 7 +++++--
drivers/pci/probe.c | 1 +
include/linux/acpi.h | 6 ++++--
include/linux/pci.h | 1 +
5 files changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index d1e666ef3fcc..ad1be5941a00 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -131,6 +131,7 @@ static struct pci_osc_bit_struct pci_osc_support_bit[] = {
{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
{ OSC_PCI_MSI_SUPPORT, "MSI" },
+ { OSC_PCI_EDR_SUPPORT, "EDR" },
{ OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
};
@@ -141,6 +142,7 @@ static struct pci_osc_bit_struct pci_osc_control_bit[] = {
{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
{ OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
+ { OSC_PCI_EXPRESS_DPC_CONTROL, "DPC" },
};
static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
@@ -440,6 +442,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
if (pci_msi_enabled())
support |= OSC_PCI_MSI_SUPPORT;
+ if (IS_ENABLED(CONFIG_PCIE_EDR))
+ support |= OSC_PCI_EDR_SUPPORT;
decode_osc_support(root, "OS supports", support);
status = acpi_pci_osc_support(root, support);
@@ -487,6 +491,16 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
control |= OSC_PCI_EXPRESS_AER_CONTROL;
}
+ /*
+ * Per the Downstream Port Containment Related Enhancements ECN to
+ * the PCI Firmware Spec, r3.2, sec 4.5.1, table 4-5,
+ * OSC_PCI_EXPRESS_DPC_CONTROL indicates the OS supports both DPC
+ * and EDR. So use CONFIG_PCIE_EDR for requesting DPC control which
+ * will only be turned on if both EDR and DPC is enabled.
+ */
+ if (IS_ENABLED(CONFIG_PCIE_EDR))
+ control |= OSC_PCI_EXPRESS_DPC_CONTROL;
+
requested = control;
status = acpi_pci_osc_control_set(handle, &control,
OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
@@ -916,6 +930,8 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
host_bridge->native_pme = 0;
if (!(root->osc_control_set & OSC_PCI_EXPRESS_LTR_CONTROL))
host_bridge->native_ltr = 0;
+ if (!(root->osc_control_set & OSC_PCI_EXPRESS_DPC_CONTROL))
+ host_bridge->native_dpc = 0;
/*
* Evaluate the "PCI Boot Configuration" _DSM Function. If it
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 5075cb9e850c..009742c865d6 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -253,10 +253,13 @@ static int get_port_device_capability(struct pci_dev *dev)
/*
* With dpc-native, allow Linux to use DPC even if it doesn't have
* permission to use AER.
+ * If EDR support is enabled in OS, then even if AER is not handled in
+ * OS, DPC service can be enabled.
*/
if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
- pci_aer_available() &&
- (pcie_ports_dpc_native || (services & PCIE_PORT_SERVICE_AER)))
+ ((IS_ENABLED(CONFIG_PCIE_EDR) && !host->native_dpc) ||
+ (pci_aer_available() &&
+ (pcie_ports_dpc_native || (services & PCIE_PORT_SERVICE_AER)))))
services |= PCIE_PORT_SERVICE_DPC;
if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 512cb4312ddd..c9a9c5b42e72 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -598,6 +598,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
bridge->native_shpc_hotplug = 1;
bridge->native_pme = 1;
bridge->native_ltr = 1;
+ bridge->native_dpc = 1;
}
struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 0f37a7d5fa77..0a7aaa452a98 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -515,8 +515,9 @@ extern bool osc_pc_lpi_support_confirmed;
#define OSC_PCI_CLOCK_PM_SUPPORT 0x00000004
#define OSC_PCI_SEGMENT_GROUPS_SUPPORT 0x00000008
#define OSC_PCI_MSI_SUPPORT 0x00000010
+#define OSC_PCI_EDR_SUPPORT 0x00000080
#define OSC_PCI_HPX_TYPE_3_SUPPORT 0x00000100
-#define OSC_PCI_SUPPORT_MASKS 0x0000011f
+#define OSC_PCI_SUPPORT_MASKS 0x0000019f
/* PCI Host Bridge _OSC: Capabilities DWORD 3: Control Field */
#define OSC_PCI_EXPRESS_NATIVE_HP_CONTROL 0x00000001
@@ -525,7 +526,8 @@ extern bool osc_pc_lpi_support_confirmed;
#define OSC_PCI_EXPRESS_AER_CONTROL 0x00000008
#define OSC_PCI_EXPRESS_CAPABILITY_CONTROL 0x00000010
#define OSC_PCI_EXPRESS_LTR_CONTROL 0x00000020
-#define OSC_PCI_CONTROL_MASKS 0x0000003f
+#define OSC_PCI_EXPRESS_DPC_CONTROL 0x00000080
+#define OSC_PCI_CONTROL_MASKS 0x000000bf
#define ACPI_GSB_ACCESS_ATTRIB_QUICK 0x00000002
#define ACPI_GSB_ACCESS_ATTRIB_SEND_RCV 0x00000004
diff --git a/include/linux/pci.h b/include/linux/pci.h
index c393dff2d66f..d0739e90f4e7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -510,6 +510,7 @@ struct pci_host_bridge {
unsigned int native_shpc_hotplug:1; /* OS may use SHPC hotplug */
unsigned int native_pme:1; /* OS may use PCIe PME */
unsigned int native_ltr:1; /* OS may use PCIe LTR */
+ unsigned int native_dpc:1; /* OS may use PCIe DPC */
unsigned int preserve_config:1; /* Preserve FW resource setup */
/* Resource alignment requirements */
--
2.21.0
Powered by blists - more mailing lists