[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3a8e609a-58aa-d2c1-c140-e1f0127dd53b@gmail.com>
Date: Sun, 19 Jan 2020 18:14:07 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Sowjanya Komatineni <skomatineni@...dia.com>,
thierry.reding@...il.com, jonathanh@...dia.com, broonie@...nel.org,
lgirdwood@...il.com, perex@...ex.cz, tiwai@...e.com,
mperttunen@...dia.com, gregkh@...uxfoundation.org,
sboyd@...nel.org, robh+dt@...nel.org, mark.rutland@....com
Cc: pdeschrijver@...dia.com, pgaikwad@...dia.com, spujar@...dia.com,
josephl@...dia.com, daniel.lezcano@...aro.org,
mmaddireddy@...dia.com, markz@...dia.com,
devicetree@...r.kernel.org, linux-clk@...r.kernel.org,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v8 19/22] ASoC: tegra: Enable audio mclk during
tegra_asoc_utils_init
14.01.2020 10:24, Sowjanya Komatineni пишет:
> Tegra PMC clock clk_out_1 is dedicated for audio mclk from Tegra30
> through Tegra210 and currently Tegra clock driver keeps the audio
> mclk enabled.
>
> With the move of PMC clocks from clock driver into pmc driver,
> audio mclk enable from clock driver is removed and this should be
> taken care by the audio driver.
>
> tegra_asoc_utils_init calls tegra_asoc_utils_set_rate and audio mclk
> rate configuration is not needed during init and set_rate is actually
> done during hw_params callback.
>
> So, this patch removes tegra_asoc_utils_set_rate call and just leaves
> the audio mclk enabled.
>
> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
> ---
> sound/soc/tegra/tegra_asoc_utils.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/tegra/tegra_asoc_utils.c b/sound/soc/tegra/tegra_asoc_utils.c
> index 1dce5ad6e665..99584970f5f4 100644
> --- a/sound/soc/tegra/tegra_asoc_utils.c
> +++ b/sound/soc/tegra/tegra_asoc_utils.c
> @@ -216,9 +216,16 @@ int tegra_asoc_utils_init(struct tegra_asoc_utils_data *data,
> data->clk_cdev1 = clk_out_1;
> }
>
> - ret = tegra_asoc_utils_set_rate(data, 44100, 256 * 44100);
> - if (ret)
> + /*
> + * FIXME: There is some unknown dependency between audio mclk disable
> + * and suspend-resume functionality on Tegra30, although audio mclk is
> + * only needed for audio.
> + */
> + ret = clk_prepare_enable(data->clk_cdev1);
> + if (ret) {
> + dev_err(data->dev, "Can't enable cdev1: %d\n", ret);
> return ret;
> + }
>
> return 0;
> }
>
Shouldn't the clock be disabled on driver's removal?
Powered by blists - more mailing lists