linux-kernel - [PATCH 3/8] ARM: at91: pm: add macros for plla disable/enable

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1579522208-19523-4-git-send-email-claudiu.beznea@microchip.com>
Date:   Mon, 20 Jan 2020 14:10:03 +0200
From:   Claudiu Beznea <claudiu.beznea@...rochip.com>
To:     <nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
        <ludovic.desroches@...rochip.com>, <linux@...linux.org.uk>,
        <mturquette@...libre.com>, <sboyd@...nel.org>
CC:     <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <linux-clk@...r.kernel.org>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: [PATCH 3/8] ARM: at91: pm: add macros for plla disable/enable

Add macros for PLLA disable and enable (in disable macro the PLLA
state will also be saved). This prepares the field for PLLA disable/enable
for suspend/resume on SAM9X60.

Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---
 arch/arm/mach-at91/pm_suspend.S | 57 ++++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index bfb3aab8859e..64460b4e0fc1 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -47,15 +47,6 @@ tmp2	.req	r5
 	.endm
 
 /*
- * Wait until PLLA has locked.
- */
-	.macro wait_pllalock
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKA
-	beq	1b
-	.endm
-
-/*
  * Put the processor to enter the idle state
  */
 	.macro at91_cpu_idle
@@ -336,6 +327,34 @@ ENDPROC(at91_backup_mode)
 3:
 .endm
 
+.macro at91_plla_disable
+	/* Save PLLA setting and disable it */
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
+
+	/* Disable PLLA. */
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+.endm
+
+.macro at91_plla_enable
+	/* Restore PLLA setting */
+	ldr	tmp1, .saved_pllar
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+	/* Enable PLLA. */
+	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
+	bne	1f
+	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
+	beq	2f
+
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
+	beq	1b
+2:
+.endm
+
 ENTRY(at91_ulp_mode)
 	ldr	pmc, .pmc_base
 	ldr	tmp2, .mckr_offset
@@ -352,13 +371,7 @@ ENTRY(at91_ulp_mode)
 
 	wait_mckrdy
 
-	/* Save PLLA setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
-	str	tmp1, .saved_pllar
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	at91_plla_disable
 
 	ldr	r0, .pm_mode
 	cmp	r0, #AT91_PM_ULP1
@@ -374,17 +387,7 @@ ulp1_mode:
 ulp_exit:
 	ldr	pmc, .pmc_base
 
-	/* Restore PLLA setting */
-	ldr	tmp1, .saved_pllar
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	3f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	4f
-3:
-	wait_pllalock
-4:
+	at91_plla_enable
 
 	/*
 	 * Restore master clock setting
-- 
2.7.4