[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFpOtW5ZkFEhamCLPNsD-ECH1c1gERzMwT5MRMWc_9q_OQ@mail.gmail.com>
Date: Mon, 20 Jan 2020 13:30:13 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
Cc: Adrian Hunter <adrian.hunter@...el.com>,
Asutosh Das <asutoshd@...eaurora.org>,
Sahitya Tummala <stummala@...eaurora.org>,
Sayali Lokhande <sayalil@...eaurora.org>, cang@...eaurora.org,
Ram Prakash Gupta <rampraka@...eaurora.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Ritesh Harjani <riteshh@...eaurora.org>,
Andy Gross <agross@...nel.org>,
Andrew Jeffery <andrew@...id.au>,
Faiz Abbas <faiz_abbas@...com>,
Thierry Reding <treding@...dia.com>,
Thomas Gleixner <tglx@...utronix.de>,
"Enrico Weigelt, metux IT consult" <info@...ux.net>,
BOUGH CHEN <haibo.chen@....com>,
Takao Orito <orito.takao@...ionext.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: Re: [PATCH V2 2/2] mmc: sdhci-msm: Add CQHCI support for sdhci-msm
On Thu, 16 Jan 2020 at 18:05, Veerabhadrarao Badiganti
<vbadigan@...eaurora.org> wrote:
>
> From: Ritesh Harjani <riteshh@...eaurora.org>
>
> This adds CQHCI support for sdhci-msm platforms.
>
> Signed-off-by: Ritesh Harjani <riteshh@...eaurora.org>
> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
Applied for next, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/host/Kconfig | 1 +
> drivers/mmc/host/sdhci-msm.c | 133 ++++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 133 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index d06b2df..7f2ae59 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -501,6 +501,7 @@ config MMC_SDHCI_MSM
> depends on ARCH_QCOM || (ARM && COMPILE_TEST)
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> + select MMC_CQHCI
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> support present in Qualcomm SOCs. The controller supports
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 3d0bb5e..0b4d01f 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -15,6 +15,7 @@
> #include <linux/regulator/consumer.h>
>
> #include "sdhci-pltfm.h"
> +#include "cqhci.h"
>
> #define CORE_MCI_VERSION 0x50
> #define CORE_VERSION_MAJOR_SHIFT 28
> @@ -122,6 +123,10 @@
> #define msm_host_writel(msm_host, val, host, offset) \
> msm_host->var_ops->msm_writel_relaxed(val, host, offset)
>
> +/* CQHCI vendor specific registers */
> +#define CQHCI_VENDOR_CFG1 0xA00
> +#define CQHCI_VENDOR_DIS_RST_ON_CQ_EN (0x3 << 13)
> +
> struct sdhci_msm_offset {
> u32 core_hc_mode;
> u32 core_mci_data_cnt;
> @@ -1567,6 +1572,127 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
> __sdhci_msm_set_clock(host, clock);
> }
>
> +/*****************************************************************************\
> + * *
> + * MSM Command Queue Engine (CQE) *
> + * *
> +\*****************************************************************************/
> +
> +static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask)
> +{
> + int cmd_error = 0;
> + int data_error = 0;
> +
> + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
> + return intmask;
> +
> + cqhci_irq(host->mmc, intmask, cmd_error, data_error);
> + return 0;
> +}
> +
> +void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + unsigned long flags;
> + u32 ctrl;
> +
> + /*
> + * When CQE is halted, the legacy SDHCI path operates only
> + * on 16-byte descriptors in 64bit mode.
> + */
> + if (host->flags & SDHCI_USE_64_BIT_DMA)
> + host->desc_sz = 16;
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + /*
> + * During CQE command transfers, command complete bit gets latched.
> + * So s/w should clear command complete interrupt status when CQE is
> + * either halted or disabled. Otherwise unexpected SDCHI legacy
> + * interrupt gets triggered when CQE is halted/disabled.
> + */
> + ctrl = sdhci_readl(host, SDHCI_INT_ENABLE);
> + ctrl |= SDHCI_INT_RESPONSE;
> + sdhci_writel(host, ctrl, SDHCI_INT_ENABLE);
> + sdhci_writel(host, SDHCI_INT_RESPONSE, SDHCI_INT_STATUS);
> +
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> + sdhci_cqe_disable(mmc, recovery);
> +}
> +
> +static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
> + .enable = sdhci_cqe_enable,
> + .disable = sdhci_msm_cqe_disable,
> +};
> +
> +static int sdhci_msm_cqe_add_host(struct sdhci_host *host,
> + struct platform_device *pdev)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + struct cqhci_host *cq_host;
> + bool dma64;
> + u32 cqcfg;
> + int ret;
> +
> + /*
> + * When CQE is halted, SDHC operates only on 16byte ADMA descriptors.
> + * So ensure ADMA table is allocated for 16byte descriptors.
> + */
> + if (host->caps & SDHCI_CAN_64BIT)
> + host->alloc_desc_sz = 16;
> +
> + ret = sdhci_setup_host(host);
> + if (ret)
> + return ret;
> +
> + cq_host = cqhci_pltfm_init(pdev);
> + if (IS_ERR(cq_host)) {
> + ret = PTR_ERR(cq_host);
> + dev_err(&pdev->dev, "cqhci-pltfm init: failed: %d\n", ret);
> + goto cleanup;
> + }
> +
> + msm_host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> + cq_host->ops = &sdhci_msm_cqhci_ops;
> +
> + dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
> +
> + ret = cqhci_init(cq_host, host->mmc, dma64);
> + if (ret) {
> + dev_err(&pdev->dev, "%s: CQE init: failed (%d)\n",
> + mmc_hostname(host->mmc), ret);
> + goto cleanup;
> + }
> +
> + /* Disable cqe reset due to cqe enable signal */
> + cqcfg = cqhci_readl(cq_host, CQHCI_VENDOR_CFG1);
> + cqcfg |= CQHCI_VENDOR_DIS_RST_ON_CQ_EN;
> + cqhci_writel(cq_host, cqcfg, CQHCI_VENDOR_CFG1);
> +
> + /*
> + * SDHC expects 12byte ADMA descriptors till CQE is enabled.
> + * So limit desc_sz to 12 so that the data commands that are sent
> + * during card initialization (before CQE gets enabled) would
> + * get executed without any issues.
> + */
> + if (host->flags & SDHCI_USE_64_BIT_DMA)
> + host->desc_sz = 12;
> +
> + ret = __sdhci_add_host(host);
> + if (ret)
> + goto cleanup;
> +
> + dev_info(&pdev->dev, "%s: CQE init: success\n",
> + mmc_hostname(host->mmc));
> + return ret;
> +
> +cleanup:
> + sdhci_cleanup_host(host);
> + return ret;
> +}
> +
> /*
> * Platform specific register write functions. This is so that, if any
> * register write needs to be followed up by platform specific actions,
> @@ -1731,6 +1857,7 @@ static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host)
> .set_uhs_signaling = sdhci_msm_set_uhs_signaling,
> .write_w = sdhci_msm_writew,
> .write_b = sdhci_msm_writeb,
> + .irq = sdhci_msm_cqe_irq,
> };
>
> static const struct sdhci_pltfm_data sdhci_msm_pdata = {
> @@ -1754,6 +1881,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
> u8 core_major;
> const struct sdhci_msm_offset *msm_offset;
> const struct sdhci_msm_variant_info *var_info;
> + struct device_node *node = pdev->dev.of_node;
>
> host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host));
> if (IS_ERR(host))
> @@ -1952,7 +2080,10 @@ static int sdhci_msm_probe(struct platform_device *pdev)
> pm_runtime_use_autosuspend(&pdev->dev);
>
> host->mmc_host_ops.execute_tuning = sdhci_msm_execute_tuning;
> - ret = sdhci_add_host(host);
> + if (of_property_read_bool(node, "supports-cqe"))
> + ret = sdhci_msm_cqe_add_host(host, pdev);
> + else
> + ret = sdhci_add_host(host);
> if (ret)
> goto pm_runtime_disable;
> sdhci_msm_set_regulator_caps(msm_host);
> --
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
Powered by blists - more mailing lists