| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200120142051.28533-2-alexandru.ardelean@analog.com>
Date: Mon, 20 Jan 2020 16:20:49 +0200
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
To: <linux-iio@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <devel@...verdev.osuosl.org>, <dragos.bogdan@...log.com>,
<nuno.sa@...log.com>, <jic23@...nel.org>,
Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH 2/4] iio: imu: adis: Refactor adis_initial_startup
From: Nuno Sá <nuno.sa@...log.com>
All the ADIS devices perform, at the beginning, a self test to make sure
the device is in a sane state. Furthermore, some drivers also do a call
to `adis_reset()` before the test which is also a good practice. This
patch unifies all those operation so that, there's no need for code
duplication. Furthermore, the rst pin is also checked to make sure the
device is not in HW reset. On top of this, some drivers also read the
device product id and compare it with the device being probed to make
sure the correct device is being handled. This can also be passed to the
library by introducing a variable holding the PROD_ID register of the
device.
Signed-off-by: Nuno Sá <nuno.sa@...log.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
drivers/iio/imu/Kconfig | 1 +
drivers/iio/imu/adis.c | 63 ++++++++++++++++++++++++++----------
include/linux/iio/imu/adis.h | 15 ++++++++-
3 files changed, 61 insertions(+), 18 deletions(-)
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 60bb1029e759..63036cf473c7 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -85,6 +85,7 @@ endmenu
config IIO_ADIS_LIB
tristate
+ depends on GPIOLIB
help
A set of IO helper functions for the Analog Devices ADIS* device family.
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index d02b1911b0f2..1eca5271380e 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -7,6 +7,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
@@ -365,36 +366,64 @@ static int adis_self_test(struct adis *adis)
}
/**
- * adis_inital_startup() - Performs device self-test
+ * __adis_initial_startup() - Device initial setup
* @adis: The adis device
*
+ * This functions makes sure the device is not in reset, via rst pin.
+ * Furthermore it performs a SW reset (only in the case we are not coming from
+ * reset already) and a self test. It also compares the product id with the
+ * device id if the prod_id_reg variable is set.
+ *
* Returns 0 if the device is operational, a negative error code otherwise.
*
* This function should be called early on in the device initialization sequence
* to ensure that the device is in a sane and known state and that it is usable.
*/
-int adis_initial_startup(struct adis *adis)
+int __adis_initial_startup(struct adis *adis)
{
int ret;
-
- mutex_lock(&adis->state_lock);
+ struct gpio_desc *gpio;
+ const struct adis_timeout *timeouts = adis->data->timeouts;
+ const char *iio_name = spi_get_device_id(adis->spi)->name;
+ u16 prod_id, dev_id;
+
+ /* check if the device has rst pin low */
+ gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_ASIS);
+ if (IS_ERR(gpio)) {
+ return PTR_ERR(gpio);
+ } else if (gpio && gpiod_get_value_cansleep(gpio)) {
+ /* bring device out of reset */
+ gpiod_set_value_cansleep(gpio, 0);
+ msleep(timeouts->reset_ms);
+ } else {
+ ret = __adis_reset(adis);
+ if (ret)
+ return ret;
+ }
ret = adis_self_test(adis);
- if (ret) {
- dev_err(&adis->spi->dev, "Self-test failed, trying reset.\n");
- __adis_reset(adis);
- ret = adis_self_test(adis);
- if (ret) {
- dev_err(&adis->spi->dev, "Second self-test failed, giving up.\n");
- goto out_unlock;
- }
- }
+ if (ret)
+ return ret;
-out_unlock:
- mutex_unlock(&adis->state_lock);
- return ret;
+ if (!adis->data->prod_id_reg)
+ return 0;
+
+ ret = adis_read_reg_16(adis, adis->data->prod_id_reg, &prod_id);
+ if (ret)
+ return ret;
+
+ ret = sscanf(iio_name, "adis%hu\n", &dev_id);
+ if (ret != 1)
+ return -EINVAL;
+
+ if (prod_id != dev_id)
+ dev_warn(&adis->spi->dev,
+ "Device ID(%u) and product ID(%u) do not match.",
+ dev_id, prod_id);
+
+ return 0;
}
-EXPORT_SYMBOL_GPL(adis_initial_startup);
+EXPORT_SYMBOL_GPL(__adis_initial_startup);
/**
* adis_single_conversion() - Performs a single sample conversion
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index d21a013d1122..c43e7922ab32 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -41,6 +41,7 @@ struct adis_timeout {
* @glob_cmd_reg: Register address of the GLOB_CMD register
* @msc_ctrl_reg: Register address of the MSC_CTRL register
* @diag_stat_reg: Register address of the DIAG_STAT register
+ * @prod_id_reg: Register address of the PROD_ID register
* @self_test_reg: Register address to request self test command
* @status_error_msgs: Array of error messgaes
* @status_error_mask:
@@ -54,6 +55,7 @@ struct adis_data {
unsigned int glob_cmd_reg;
unsigned int msc_ctrl_reg;
unsigned int diag_stat_reg;
+ unsigned int prod_id_reg;
unsigned int self_test_mask;
unsigned int self_test_reg;
@@ -299,6 +301,7 @@ static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
int adis_enable_irq(struct adis *adis, bool enable);
int __adis_check_status(struct adis *adis);
+int __adis_initial_startup(struct adis *adis);
static inline int adis_check_status(struct adis *adis)
{
@@ -311,7 +314,17 @@ static inline int adis_check_status(struct adis *adis)
return ret;
}
-int adis_initial_startup(struct adis *adis);
+/* locked version of __adis_initial_startup() */
+static inline int adis_initial_startup(struct adis *adis)
+{
+ int ret;
+
+ mutex_lock(&adis->state_lock);
+ ret = __adis_initial_startup(adis);
+ mutex_unlock(&adis->state_lock);
+
+ return ret;
+}
int adis_single_conversion(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, unsigned int error_mask,
--
2.20.1
Powered by blists - more mailing lists