linux-kernel - [PATCH v2 11/19] usb: dwc3: Add support for usb-conn-gpio connectors

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200120163116.1197682-12-bryan.odonoghue@linaro.org>
Date:   Mon, 20 Jan 2020 16:31:08 +0000
From:   Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To:     linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org,
        gregkh@...uxfoundation.org, jackp@...eaurora.org, balbi@...nel.org,
        bjorn.andersson@...aro.org
Cc:     linux-kernel@...r.kernel.org,
        Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
        John Stultz <john.stultz@...aro.org>,
        Lee Jones <lee.jones@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        ShuFan Lee <shufan_lee@...htek.com>,
        Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
        Suzuki K Poulose <suzuki.poulose@....com>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Yu Chen <chenyu56@...wei.com>,
        Hans de Goede <hdegoede@...hat.com>,
        Andy Shevchenko <andy.shevchenko@...il.com>,
        Jun Li <lijun.kernel@...il.com>,
        Valentin Schneider <valentin.schneider@....com>,
        devicetree@...r.kernel.org
Subject: [PATCH v2 11/19] usb: dwc3: Add support for usb-conn-gpio connectors

This patch adds the ability to probe and enumerate a connector based on
usb-conn-gpio. A device node label gpio_usb_connector is used to identify
a usb-conn-gpio as a child of the USB interface.

You would use usb-conn-gpio when a regulator in your system provides VBUS
directly to the connector instead of supplying via the USB PHY.

The parent device must have the "usb-role-switch" property, so that when
the usb-conn-gpio driver calls usb_role_switch_set_role() the notification
in dwc3 will run and the block registers will be updated to match the state
detected at the connector.

Cc: John Stultz <john.stultz@...aro.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Lee Jones <lee.jones@...aro.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>
CC: ShuFan Lee <shufan_lee@...htek.com>
Cc: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@....com>
Cc: Chunfeng Yun <chunfeng.yun@...iatek.com>
Cc: Yu Chen <chenyu56@...wei.com>
Cc: Felipe Balbi <balbi@...nel.org>
Cc: Hans de Goede <hdegoede@...hat.com>
Cc: Andy Shevchenko <andy.shevchenko@...il.com>
Cc: Jun Li <lijun.kernel@...il.com>
Cc: Valentin Schneider <valentin.schneider@....com>
Cc: Jack Pham <jackp@...eaurora.org>
Cc: linux-usb@...r.kernel.org
Cc: devicetree@...r.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
---
 drivers/usb/dwc3/drd.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 865341facece..c6bb7cb809d5 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -11,6 +11,7 @@
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/of_platform.h>
 
 #include "debug.h"
 #include "core.h"
@@ -557,9 +558,32 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc)
 	dwc3_set_mode(dwc, mode);
 	return 0;
 }
+
+static int dwc3_register_gpio_usb_connector(struct dwc3 *dwc)
+{
+	struct device		*dev = dwc->dev;
+	struct device_node	*np = dev->of_node, *con_np;
+	int			ret;
+
+	con_np = of_get_child_by_name(np, "gpio_usb_connector");
+	if (!np) {
+		dev_dbg(dev, "no usb_connector child node specified\n");
+		return 0;
+	}
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to register usb_connector - %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 #else
 #define ROLE_SWITCH 0
 #define dwc3_setup_role_switch(x) 0
+#define dwc3_register_gpio_usb_connector(x) 0
 #endif
 
 int dwc3_drd_init(struct dwc3 *dwc)
@@ -575,6 +599,9 @@ int dwc3_drd_init(struct dwc3 *dwc)
 		ret = dwc3_setup_role_switch(dwc);
 		if (ret < 0)
 			return ret;
+		ret = dwc3_register_gpio_usb_connector(dwc);
+		if (ret < 0)
+			return ret;
 	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
-- 
2.25.0