[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200121023027.2081-2-linux@roeck-us.net>
Date: Mon, 20 Jan 2020 18:30:23 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: linux-hwmon@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Clemens Ladisch <clemens@...isch.de>,
Jean Delvare <jdelvare@...e.com>,
Brad Campbell <lists2009@...rfbargle.com>,
Ondrej Čerman <ocerman@...1.eu>,
Bernhard Gebetsberger <bernhard.gebetsberger@....at>,
Holger Kiehl <Holger.Kiehl@....de>,
Michael Larabel <michael@...ronix.com>,
Jonathan McDowell <noodles@...th.li>,
Ken Moffat <zarniwhoop73@...glemail.com>,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Darren Salt <devspam@...eofthesa.me.uk>,
Guenter Roeck <linux@...ck-us.net>
Subject: [PATCH v3 1/5] hwmon: (k10temp) Use bitops
Using bitops makes bit masks and shifts easier to read.
Tested-by: Brad Campbell <lists2009@...rfbargle.com>
Tested-by: Bernhard Gebetsberger <bernhard.gebetsberger@....at>
Tested-by: Holger Kiehl <holger.kiehl@....de>
Tested-by: Michael Larabel <michael@...ronix.com>
Tested-by: Jonathan McDowell <noodles@...th.li>
Tested-by: Ken Moffat <zarniwhoop73@...glemail.com>
Tested-by: Darren Salt <devspam@...eofthesa.me.uk>
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
---
drivers/hwmon/k10temp.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 5c1dddde193c..8807d7da68db 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -5,6 +5,7 @@
* Copyright (c) 2009 Clemens Ladisch <clemens@...isch.de>
*/
+#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
@@ -31,22 +32,22 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
#endif
/* CPUID function 0x80000001, ebx */
-#define CPUID_PKGTYPE_MASK 0xf0000000
+#define CPUID_PKGTYPE_MASK GENMASK(31, 28)
#define CPUID_PKGTYPE_F 0x00000000
#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
/* DRAM controller (PCI function 2) */
#define REG_DCT0_CONFIG_HIGH 0x094
-#define DDR3_MODE 0x00000100
+#define DDR3_MODE BIT(8)
/* miscellaneous (PCI function 3) */
#define REG_HARDWARE_THERMAL_CONTROL 0x64
-#define HTC_ENABLE 0x00000001
+#define HTC_ENABLE BIT(0)
#define REG_REPORTED_TEMPERATURE 0xa4
#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
-#define NB_CAP_HTC 0x00000400
+#define NB_CAP_HTC BIT(10)
/*
* For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL
@@ -60,6 +61,9 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
/* F17h M01h Access througn SMN */
#define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET 0x00059800
+#define CUR_TEMP_SHIFT 21
+#define CUR_TEMP_RANGE_SEL_MASK BIT(19)
+
struct k10temp_data {
struct pci_dev *pdev;
void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
@@ -129,7 +133,7 @@ static unsigned int get_raw_temp(struct k10temp_data *data)
u32 regval;
data->read_tempreg(data->pdev, ®val);
- temp = (regval >> 21) * 125;
+ temp = (regval >> CUR_TEMP_SHIFT) * 125;
if (regval & data->temp_adjust_mask)
temp -= 49000;
return temp;
@@ -312,7 +316,7 @@ static int k10temp_probe(struct pci_dev *pdev,
data->read_htcreg = read_htcreg_nb_f15;
data->read_tempreg = read_tempreg_nb_f15;
} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
- data->temp_adjust_mask = 0x80000;
+ data->temp_adjust_mask = CUR_TEMP_RANGE_SEL_MASK;
data->read_tempreg = read_tempreg_nb_f17;
data->show_tdie = true;
} else {
--
2.17.1
Powered by blists - more mailing lists