[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200121161856.GZ5440@paasikivi.fi.intel.com>
Date: Tue, 21 Jan 2020 18:18:56 +0200
From: Sakari Ailus <sakari.ailus@...ux.intel.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>
Cc: linux-i2c <linux-i2c@...r.kernel.org>,
Wolfram Sang <wsa@...-dreams.de>,
ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
Bingbu Cao <bingbu.cao@...el.com>, linux-media@...r.kernel.org,
Chiranjeevi Rapolu <chiranjeevi.rapolu@...el.com>,
Hyungwoo Yang <hyungwoo.yang@...el.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Arnd Bergmann <arnd@...db.de>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Mani, Rajmohan" <rajmohan.mani@...el.com>,
Tomasz Figa <tfiga@...omium.org>
Subject: Re: [PATCH v4 6/6] Documentation: ACPI: Document probe-low-power
_DSD property
On Tue, Jan 21, 2020 at 05:09:44PM +0100, Rafael J. Wysocki wrote:
> On Tue, Jan 21, 2020 at 2:41 PM Sakari Ailus
> <sakari.ailus@...ux.intel.com> wrote:
> >
> > Document the probe-low-power _DSD property and how it is used with I²C
> > drivers.
> >
> > Signed-off-by: Sakari Ailus <sakari.ailus@...ux.intel.com>
> > ---
> > .../acpi/dsd/probe-low-power.rst | 28 +++++++++++++++++++
> > Documentation/firmware-guide/acpi/index.rst | 1 +
> > 2 files changed, 29 insertions(+)
> > create mode 100644 Documentation/firmware-guide/acpi/dsd/probe-low-power.rst
> >
> > diff --git a/Documentation/firmware-guide/acpi/dsd/probe-low-power.rst b/Documentation/firmware-guide/acpi/dsd/probe-low-power.rst
> > new file mode 100644
> > index 0000000000000..e0343ffefe071
> > --- /dev/null
> > +++ b/Documentation/firmware-guide/acpi/dsd/probe-low-power.rst
> > @@ -0,0 +1,28 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +======================================
> > +Probing I²C devices in low power state
> > +======================================
> > +
> > +Introduction
> > +============
> > +
> > +In some cases it may be preferred to leave certain devices powered off for
> > +the entire system bootup if powering on these devices has adverse side
> > +effects, beyond just powering on the said device. The _DSD property
> > +"probe-low-power" has been defined for this purpose.
>
> Well, if you say "has been defined", you need to provide a pointer to
> the definition document (a specification of some sort or similar).
How about:
s/has been defined/is used/
>
> > +
> > +How it works
> > +============
> > +
> > +The property "probe-low-power" boolean property may be used to tell Linux
> > +that the I²C framework should instruct the kernel ACPI framework to leave
> > +the device in the low power state. If the driver indicates its support for
> > +this in its struct i2c_driver.probe_low_power field and the
> > +"probe-low-power" property is present, the device will not be powered on
> > +for probe.
> > +
> > +The downside is that as the device is not powered on, even if there's a
> > +problem with the device, the driver likely probes just fine but the first
> > +user will find out the device doesn't work, instead of a failure at probe
> > +time. This feature should thus be used sparingly.
> > diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst
> > index ad3b5afdae77e..4e4ac675c0ff8 100644
> > --- a/Documentation/firmware-guide/acpi/index.rst
> > +++ b/Documentation/firmware-guide/acpi/index.rst
> > @@ -11,6 +11,7 @@ ACPI Support
> > dsd/graph
> > dsd/data-node-references
> > dsd/leds
> > + dsd/probe-low-power
> > enumeration
> > osi
> > method-customizing
> > --
> > 2.20.1
> >
--
Sakari Ailus
Powered by blists - more mailing lists