Message-ID: <20200122134026.GC4963@kroah.com>
Date:   Wed, 22 Jan 2020 14:40:26 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Darren Hart <dvhart@...radead.org>,
        Lee Jones <lee.jones@...aro.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
        "H . Peter Anvin" <hpa@...or.com>, x86@...nel.org,
        Zha Qipeng <qipeng.zha@...el.com>,
        "David E . Box" <david.e.box@...ux.intel.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
        Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Mark Brown <broonie@...nel.org>,
        platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 12/38] platform/x86: intel_scu_ipc: Split out SCU IPC
 functionality from the SCU driver

On Tue, Jan 21, 2020 at 07:00:48PM +0300, Mika Westerberg wrote:
> The SCU IPC functionality is usable outside of Intel MID devices. For
> example modern Intel CPUs include the same thing but now it is called
> PMC (Power Management Controller) instead of SCU. To make the IPC
> available for those split the driver into library part (intel_scu_ipc.c)
> and the SCU PCI driver part (intel_scu_pcidrv.c) which then calls the
> former before it goes and creates rest of the SCU devices.
> 
> We also split the Kconfig symbols so that INTEL_SCU_IPC enables the SCU
> IPC library and INTEL_SCU_PCI the SCU driver and convert the users
> accordingly. While there remove default y from the INTEL_SCU_PCI symbol
> as it is already selected by X86_INTEL_MID.
> 
> Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
> ---
>  arch/x86/Kconfig                        |  2 +-
>  arch/x86/include/asm/intel_scu_ipc.h    | 16 +++++
>  drivers/mfd/Kconfig                     |  4 +-
>  drivers/platform/x86/Kconfig            | 26 ++++---
>  drivers/platform/x86/Makefile           |  1 +
>  drivers/platform/x86/intel_scu_ipc.c    | 90 ++++++++++++-------------
>  drivers/platform/x86/intel_scu_pcidrv.c | 54 +++++++++++++++
>  7 files changed, 135 insertions(+), 58 deletions(-)
>  create mode 100644 drivers/platform/x86/intel_scu_pcidrv.c
> 
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 5e8949953660..aca17d1583c4 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -594,7 +594,7 @@ config X86_INTEL_MID
>  	select I2C
>  	select DW_APB_TIMER
>  	select APB_TIMER
> -	select INTEL_SCU_IPC
> +	select INTEL_SCU_PCI
>  	select MFD_INTEL_MSIC
>  	---help---
>  	  Select to build a kernel capable of supporting Intel MID (Mobile
> diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
> index 2a1442ba6e78..252ea0046f16 100644
> --- a/arch/x86/include/asm/intel_scu_ipc.h
> +++ b/arch/x86/include/asm/intel_scu_ipc.h
> @@ -2,6 +2,7 @@
>  #ifndef _ASM_X86_INTEL_SCU_IPC_H_
>  #define  _ASM_X86_INTEL_SCU_IPC_H_
>  
> +#include <linux/ioport.h>
>  #include <linux/notifier.h>
>  
>  #define IPCMSG_INDIRECT_READ	0x02
> @@ -19,6 +20,21 @@
>  	#define IPC_CMD_VRTC_SETTIME      1 /* Set time */
>  	#define IPC_CMD_VRTC_SETALARM     2 /* Set alarm */
>  
> +struct device;
> +
> +/**
> + * struct intel_scu_ipc_pdata - Platform data for SCU IPC
> + * @mem: Base address of SCU IPC MMIO registers
> + * @irq: The IRQ number used for SCU (optional)
> + */
> +struct intel_scu_ipc_pdata {
> +	struct resource mem;
> +	int irq;
> +};
> +
> +int intel_scu_ipc_register(struct device *dev,
> +			   const struct intel_scu_ipc_pdata *pdata);
> +
>  /* Read single register */
>  int intel_scu_ipc_ioread8(u16 addr, u8 *data);
>  
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 420900852166..59515142438e 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -593,7 +593,7 @@ config INTEL_SOC_PMIC_MRFLD
>  	tristate "Support for Intel Merrifield Basin Cove PMIC"
>  	depends on GPIOLIB
>  	depends on ACPI
> -	depends on INTEL_SCU_IPC
> +	depends on INTEL_SCU
>  	select MFD_CORE
>  	select REGMAP_IRQ
>  	help
> @@ -625,7 +625,7 @@ config MFD_INTEL_LPSS_PCI
>  
>  config MFD_INTEL_MSIC
>  	bool "Intel MSIC"
> -	depends on INTEL_SCU_IPC
> +	depends on INTEL_SCU
>  	select MFD_CORE
>  	help
>  	  Select this option to enable access to Intel MSIC (Avatele
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index dd4326736d11..50deff627b46 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -986,25 +986,33 @@ config INTEL_VBTN
>  	  be called intel_vbtn.
>  
>  config INTEL_SCU_IPC
> -	bool "Intel SCU IPC Support"
> +	bool
> +
> +config INTEL_SCU
> +	bool
> +	select INTEL_SCU_IPC
> +
> +config INTEL_SCU_PCI
> +	bool "Intel SCU PCI driver"
>  	depends on X86_INTEL_MID
> -	default y
> -	---help---
> -	  IPC is used to bridge the communications between kernel and SCU on
> -	  some embedded Intel x86 platforms. This is not needed for PC-type
> -	  machines.
> +	select INTEL_SCU
> +	help
> +	  This driver is used to bridge the communications between kernel
> +	  and SCU on some embedded Intel x86 platforms. It also creates
> +	  devices that are connected to the SoC through the SCU. This is
> +	  not needed for PC-type machines.
>  
>  config INTEL_SCU_IPC_UTIL
>  	tristate "Intel SCU IPC utility driver"
> -	depends on INTEL_SCU_IPC
> -	---help---
> +	depends on INTEL_SCU
> +	help
>  	  The IPC Util driver provides an interface with the SCU enabling
>  	  low level access for debug work and updating the firmware. Say
>  	  N unless you will be doing this on an Intel MID platform.
>  
>  config INTEL_MID_POWER_BUTTON
>  	tristate "power button driver for Intel MID platforms"
> -	depends on INTEL_SCU_IPC && INPUT
> +	depends on INTEL_SCU && INPUT
>  	help
>  	  This driver handles the power button on the Intel MID platforms.
>  
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 42d85a00be4e..c7a42feaa521 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -68,6 +68,7 @@ intel_cht_int33fe-objs		:= intel_cht_int33fe_common.o \
>  obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o
>  obj-$(CONFIG_INTEL_HID_EVENT)	+= intel-hid.o
>  obj-$(CONFIG_INTEL_VBTN)	+= intel-vbtn.o
> +obj-$(CONFIG_INTEL_SCU_PCI)	+= intel_scu_pcidrv.o
>  obj-$(CONFIG_INTEL_SCU_IPC)	+= intel_scu_ipc.o
>  obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o
>  obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o
> diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
> index 93a810fa6c8a..a5ca1aae9547 100644
> --- a/drivers/platform/x86/intel_scu_ipc.c
> +++ b/drivers/platform/x86/intel_scu_ipc.c
> @@ -18,11 +18,8 @@
>  #include <linux/errno.h>
>  #include <linux/init.h>
>  #include <linux/interrupt.h>
> -#include <linux/pci.h>
> -#include <linux/pm.h>
> -#include <linux/sfi.h>
> +#include <linux/io.h>
>  
> -#include <asm/intel-mid.h>
>  #include <asm/intel_scu_ipc.h>
>  
>  /* IPC defines the following message types */
> @@ -56,9 +53,10 @@
>  
>  struct intel_scu_ipc_dev {
>  	struct device *dev;
> +	struct resource mem;
> +	int irq;
>  	void __iomem *ipc_base;
>  	struct completion cmd_complete;
> -	u8 irq_mode;
>  };
>  
>  static struct intel_scu_ipc_dev  ipcdev; /* Only one for now */
> @@ -166,7 +164,7 @@ static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
>  
>  static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
>  {
> -	return scu->irq_mode ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
> +	return scu->irq > 0 ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
>  }
>  
>  /* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
> @@ -402,60 +400,60 @@ static irqreturn_t ioc(int irq, void *dev_id)
>  }
>  
>  /**
> - *	ipc_probe	-	probe an Intel SCU IPC
> - *	@pdev: the PCI device matching
> - *	@id: entry in the match table
> + * intel_scu_ipc_register() - Register SCU IPC mechanism
> + * @dev: SCU device
> + * @pdata: Platform specific data
>   *
> - *	Enable and install an intel SCU IPC. This appears in the PCI space
> - *	but uses some hard coded addresses as well.
> + * Call this function to initialize SCU IPC mechanism for @dev.
>   */
> -static int ipc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> +int intel_scu_ipc_register(struct device *dev,
> +			   const struct intel_scu_ipc_pdata *pdata)
>  {

How do you "know" that dev really is a SCU device?

If you are "registering" something, shouldn't you have set it up
properly?  You are saying that any random struct device has these
attributes.  Now that's fine as you "know" this, but usually you would
create a child device that really is a SCU functionality, i.e. a class
device.

So how about making the SCU stuff a class as that is what is then made a
child of the struct device as it is how it talks to this class of
devices, right?

As it is, this "register" really feels odd to me in the scheme of how
the whole driver model works.

Not to mention I didn't see any reference counting increment happening
here, as you are passing a pointer that is then saved off, right?


>  	int err;
>  	struct intel_scu_ipc_dev *scu = &ipcdev;
>  
> -	if (scu->dev)		/* We support only one SCU */
> -		return -EBUSY;
> +	mutex_lock(&ipclock);
> +	/* We support only one IPC */
> +	if (scu->dev) {
> +		err = -EBUSY;
> +		goto err_unlock;
> +	}
>  
> -	err = pcim_enable_device(pdev);
> -	if (err)
> -		return err;
> +	if (!request_mem_region(pdata->mem.start, resource_size(&pdata->mem),
> +				"intel_scu_ipc")) {
> +		err = -EBUSY;
> +		goto err_unlock;
> +	}
>  
> -	err = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
> -	if (err)
> -		return err;
> +	scu->ipc_base = ioremap(pdata->mem.start, resource_size(&pdata->mem));
> +	if (!scu->ipc_base) {
> +		err = -ENOMEM;
> +		goto err_release;
> +	}
>  
> +	scu->mem = pdata->mem;
> +	scu->irq = pdata->irq;
>  	init_completion(&scu->cmd_complete);
>  
> -	scu->ipc_base = pcim_iomap_table(pdev)[0];
> -
> -	err = devm_request_irq(&pdev->dev, pdev->irq, ioc, 0, "intel_scu_ipc",
> -			       scu);
> -	if (err)
> -		return err;
> +	if (scu->irq > 0) {
> +		err = request_irq(scu->irq, ioc, 0, "intel_scu_ipc", scu);
> +		if (err)
> +			goto err_unmap;
> +	}
>  
>  	/* Assign device at last */
> -	scu->dev = &pdev->dev;
> -
> -	intel_scu_devices_create();
> +	scu->dev = dev;

Look ma, a reference count mess!

Ick.

Please make this a class.

thanks,

greg k-h

Powered by blists - more mailing lists