| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20200122165014.GG2935@paulmck-ThinkPad-P72>
Date: Wed, 22 Jan 2020 08:50:14 -0800
From: "Paul E. McKenney" <paulmck@...nel.org>
To: Qian Cai <cai@....pw>
Cc: rcu@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: Re: Boot warning at rcu_check_gp_start_stall()
On Wed, Jan 22, 2020 at 12:20:02AM -0500, Qian Cai wrote:
>
>
> > On Jan 22, 2020, at 12:07 AM, Paul E. McKenney <paulmck@...nel.org> wrote:
> >
> > On Tue, Jan 21, 2020 at 11:16:06PM -0500, Qian Cai wrote:
> >>
> >>
> >>> On Jan 21, 2020, at 3:46 PM, Paul E. McKenney <paulmck@...nel.org> wrote:
> >>>
> >>> On Tue, Jan 21, 2020 at 02:09:05PM -0500, Qian Cai wrote:
> >>>>> On Jan 21, 2020, at 11:15 AM, Paul E. McKenney <paulmck@...nel.org> wrote:
> >>>>> On Tue, Jan 21, 2020 at 09:37:13AM -0500, Qian Cai wrote:
> >>>>>>> On Jan 21, 2020, at 9:19 AM, Paul E. McKenney <paulmck@...nel.org> wrote:
> >>>>>>>
> >>>>>>> One approach would be to boot with rcupdate.rcu_cpu_stall_timeout=300,
> >>>>>>> which would allow more time.
> >>>>>>
> >>>>>> It works for me if once that warning triggered, give a bit information about adjusting the parameter when debugging options are on to suppress the warning due to expected long boot.
> >>>>>
> >>>>> Indeed. 300 seconds as shown above is currently the maximum, but
> >>>>> please let me know if it needs to be increased. This module parameter
> >>>>> is writable after boot via sysfs, so maybe that could be part of the
> >>>>> workaround.
> >>>>>
> >>>>>>> Longer term, I could suppress this warning during boot when
> >>>>>>> CONFIG_EFI_PGT_DUMP=y, but that sounds quite specific. Alternatively,
> >>>>>>> I could provide a Kconfig option that suppressed this during boot
> >>>>>>> that was selected by whatever long-running boot-time Kconfig option
> >>>>>>> needed it. Yet another approach would be for long-running operations
> >>>>>>> like efi_dump_pagetable() to suppress stalls on entry and re-enable them
> >>>>>>> upon exit.
> >>>>>>>
> >>>>>>> Thoughts?
> >>>>>>
> >>>>>> None of the options sounds particularly better for me because there could come up with other options may trigger this, memtest comes in mind, for example. Then, it is a bit of pain to maintain of unknown.
> >>>>>
> >>>>> I was afraid of that. ;-)
> >>>>>
> >>>>> Could you please send me the full dmesg up to that point? No promises,
> >>>>> but it might well be that I can make some broad-spectrum adjustment
> >>>>> within RCU. Only one way to find out…
> >>>>
> >>>> https://cailca.github.io/files/dmesg.txt
> >>>
> >>> Interesting.
> >>>
> >>> Does the following (very lightly tested) patch help?
> >>
> >> Yes, it works fine.
> >
> > Very good, thank you! May I apply your Tested-by?
>
> Just one thing minor,
>
> Applying: Boot warning at rcu_check_gp_start_stall()
> .git/rebase-apply/patch:66: space before tab in indent.
> READ_ONCE(rnp_root->gp_seq_needed)) ||
> warning: 1 line adds whitespace errors.
Good catch, fixed!
> Otherwise,
>
> Tested-by: Qian Cai <cai@....pw>
Applied, thank you!
Thanx, Paul
> >>> ------------------------------------------------------------------------
> >>>
> >>> commit fb21277f8f1c5cc40a8d41da2db4b0c499459821
> >>> Author: Paul E. McKenney <paulmck@...nel.org>
> >>> Date: Tue Jan 21 12:30:22 2020 -0800
> >>>
> >>> rcu: Don't flag non-starting GPs before GP kthread is running
> >>>
> >>> Currently rcu_check_gp_start_stall() complains if a grace period takes
> >>> too long to start, where "too long" is roughly one RCU CPU stall-warning
> >>> interval. This has worked well, but there are some debugging Kconfig
> >>> options (such as CONFIG_EFI_PGT_DUMP=y) that can make booting take a
> >>> very long time, so much so that the stall-warning interval has expired
> >>> before RCU's grace-period kthread has even been spawned.
> >>>
> >>> This commit therefore resets the rcu_state.gp_req_activity and
> >>> rcu_state.gp_activity timestamps just before the grace-period kthread
> >>> is spawned, and modifies the checks and adds ordering to ensure that
> >>> if rcu_check_gp_start_stall() sees that the grace-period kthread
> >>> has been spawned, that it will also see the resets applied to the
> >>> rcu_state.gp_req_activity and rcu_state.gp_activity timestamps.
> >>>
> >>> Reported-by: Qian Cai <cai@....pw>
> >>> Signed-off-by: Paul E. McKenney <paulmck@...nel.org>
> >>>
> >>> diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> >>> index 04718bc..d9d619d 100644
> >>> --- a/kernel/rcu/tree.c
> >>> +++ b/kernel/rcu/tree.c
> >>> @@ -1209,7 +1209,7 @@ static bool rcu_start_this_gp(struct rcu_node *rnp_start, struct rcu_data *rdp,
> >>> trace_rcu_this_gp(rnp, rdp, gp_seq_req, TPS("Startedroot"));
> >>> WRITE_ONCE(rcu_state.gp_flags, rcu_state.gp_flags | RCU_GP_FLAG_INIT);
> >>> WRITE_ONCE(rcu_state.gp_req_activity, jiffies);
> >>> - if (!rcu_state.gp_kthread) {
> >>> + if (!READ_ONCE(rcu_state.gp_kthread)) {
> >>> trace_rcu_this_gp(rnp, rdp, gp_seq_req, TPS("NoGPkthread"));
> >>> goto unlock_out;
> >>> }
> >>> @@ -1259,10 +1259,10 @@ static bool rcu_future_gp_cleanup(struct rcu_node *rnp)
> >>> */
> >>> static void rcu_gp_kthread_wake(void)
> >>> {
> >>> - if ((current == rcu_state.gp_kthread &&
> >>> + if ((current == READ_ONCE(rcu_state.gp_kthread) &&
> >>> !in_irq() && !in_serving_softirq()) ||
> >>> !READ_ONCE(rcu_state.gp_flags) ||
> >>> - !rcu_state.gp_kthread)
> >>> + !READ_ONCE(rcu_state.gp_kthread))
> >>> return;
> >>> WRITE_ONCE(rcu_state.gp_wake_time, jiffies);
> >>> WRITE_ONCE(rcu_state.gp_wake_seq, READ_ONCE(rcu_state.gp_seq));
> >>> @@ -3619,7 +3619,10 @@ static int __init rcu_spawn_gp_kthread(void)
> >>> }
> >>> rnp = rcu_get_root();
> >>> raw_spin_lock_irqsave_rcu_node(rnp, flags);
> >>> - rcu_state.gp_kthread = t;
> >>> + WRITE_ONCE(rcu_state.gp_activity, jiffies);
> >>> + WRITE_ONCE(rcu_state.gp_req_activity, jiffies);
> >>> + // Reset .gp_activity and .gp_req_activity before setting .gp_kthread.
> >>> + smp_store_release(&rcu_state.gp_kthread, t); /* ^^^ */
> >>> raw_spin_unlock_irqrestore_rcu_node(rnp, flags);
> >>> wake_up_process(t);
> >>> rcu_spawn_nocb_kthreads();
> >>> diff --git a/kernel/rcu/tree_stall.h b/kernel/rcu/tree_stall.h
> >>> index 476458c..75f6e9f 100644
> >>> --- a/kernel/rcu/tree_stall.h
> >>> +++ b/kernel/rcu/tree_stall.h
> >>> @@ -578,6 +578,7 @@ void show_rcu_gp_kthreads(void)
> >>> unsigned long jw;
> >>> struct rcu_data *rdp;
> >>> struct rcu_node *rnp;
> >>> + struct task_struct *t = READ_ONCE(rcu_state.gp_kthread);
> >>>
> >>> j = jiffies;
> >>> ja = j - READ_ONCE(rcu_state.gp_activity);
> >>> @@ -585,8 +586,7 @@ void show_rcu_gp_kthreads(void)
> >>> jw = j - READ_ONCE(rcu_state.gp_wake_time);
> >>> pr_info("%s: wait state: %s(%d) ->state: %#lx delta ->gp_activity %lu ->gp_req_activity %lu ->gp_wake_time %lu ->gp_wake_seq %ld ->gp_seq %ld ->gp_seq_needed %ld ->gp_flags %#x\n",
> >>> rcu_state.name, gp_state_getname(rcu_state.gp_state),
> >>> - rcu_state.gp_state,
> >>> - rcu_state.gp_kthread ? rcu_state.gp_kthread->state : 0x1ffffL,
> >>> + rcu_state.gp_state, t ? t->state : 0x1ffffL,
> >>> ja, jr, jw, (long)READ_ONCE(rcu_state.gp_wake_seq),
> >>> (long)READ_ONCE(rcu_state.gp_seq),
> >>> (long)READ_ONCE(rcu_get_root()->gp_seq_needed),
> >>> @@ -633,7 +633,8 @@ static void rcu_check_gp_start_stall(struct rcu_node *rnp, struct rcu_data *rdp,
> >>>
> >>> if (!IS_ENABLED(CONFIG_PROVE_RCU) || rcu_gp_in_progress() ||
> >>> ULONG_CMP_GE(READ_ONCE(rnp_root->gp_seq),
> >>> - READ_ONCE(rnp_root->gp_seq_needed)))
> >>> + READ_ONCE(rnp_root->gp_seq_needed)) ||
> >>> + !smp_load_acquire(&rcu_state.gp_kthread))
> >>> return;
> >>> j = jiffies; /* Expensive access, and in common case don't get here. */
> >>> if (time_before(j, READ_ONCE(rcu_state.gp_req_activity) + gpssdelay) ||
>
Powered by blists - more mailing lists