Date:   Wed, 22 Jan 2020 20:05:08 +0100
From:   Sebastian Reichel <sebastian.reichel@...labora.com>
To:     Guenter Roeck <linux@...ck-us.net>
Cc:     linux-hwmon@...r.kernel.org, linux-kernel@...r.kernel.org,
        Clemens Ladisch <clemens@...isch.de>,
        Jean Delvare <jdelvare@...e.com>,
        Brad Campbell <lists2009@...rfbargle.com>,
        Ondrej Čerman <ocerman@...1.eu>,
        Bernhard Gebetsberger <bernhard.gebetsberger@....at>,
        Holger Kiehl <Holger.Kiehl@....de>,
        Michael Larabel <michael@...ronix.com>,
        Jonathan McDowell <noodles@...th.li>,
        Ken Moffat <zarniwhoop73@...glemail.com>,
        Darren Salt <devspam@...eofthesa.me.uk>
Subject: Re: [PATCH v4 0/6] hwmon: k10temp driver improvements

Hi,

The series is

Tested-by: Sebastian Reichel <sebastian.reichel@...labora.com>

on 3800X.

idle:

k10temp-pci-00c3
Adapter: PCI adapter
Vcore:       919.00 mV
Vsoc:          1.01 V
Tdie:         +41.1°C
Tctl:         +41.1°C
Tccd1:        +39.8°C
Icore:         0.00 A
Isoc:          4.50 A

with load:

k10temp-pci-00c3
Adapter: PCI adapter
Vcore:         1.29 V
Vsoc:          1.01 V
Tdie:         +80.4°C
Tctl:         +80.4°C
Tccd1:        +78.5°C
Icore:        61.00 A
Isoc:          6.50 A

debugfs output is also register dumps are also working.

-- Sebastian

On Wed, Jan 22, 2020 at 08:07:54AM -0800, Guenter Roeck wrote:
> This patch series implements various improvements for the k10temp driver.
> 
> Patch 1/6 introduces the use of bit operations.
> 
> Patch 2/6 converts the driver to use the devm_hwmon_device_register_with_info
> API. This not only simplifies the code and reduces its size, it also
> makes the code easier to maintain and enhance. 
> 
> Patch 3/6 adds support for reporting Core Complex Die (CCD) temperatures
> on Zen2 (Ryzen and Threadripper) CPUs (note that reporting is incomplete
> for Threadripper CPUs - it is known that additional temperature sensors
> exist, but the register locations are unknown).
> 
> Patch 4/6 adds support for reporting core and SoC current and voltage
> information on Ryzen CPUs (note: voltage and current measurements for
> Threadripper and EPYC CPUs are known to exist, but register locations
> are unknown, and values are therefore not reported at this time).
> 
> Patch 5/6 removes the maximum temperature from Tdie for Ryzen CPUs.
> It is inaccurate, misleading, and it just doesn't make sense to report
> wrong information.
> 
> Patch 6/6 adds debugfs files to provide raw thermal and SVI register
> dumps. This may help in the future to identify additional sensors and/or
> to fix problems.
> 
> With all patches in place, output on Ryzen 3900X CPUs looks as follows
> (with the system under load).
> 
> k10temp-pci-00c3
> Adapter: PCI adapter
> Vcore:        +1.39 V
> Vsoc:         +1.18 V
> Tdie:         +79.9°C
> Tctl:         +79.9°C
> Tccd1:        +61.8°C
> Tccd2:        +76.5°C
> Icore:       +46.00 A
> Isoc:        +12.00 A
> 
> The voltage and current information is limited to Ryzen CPUs. Voltage
> and current reporting on Threadripper and EPYC CPUs is different, and the
> reported information is either incomplete or wrong. Exclude it for the time
> being; it can always be added if/when more information becomes available.
> 
> Tested with the following Ryzen CPUs:
>     1300X A user with this CPU in the system reported somewhat unexpected
>           values for Vcore; it isn't entirely if at all clear why that is
>           the case. Overall this does not warrant holding up the series.
>     1600
>     1800X
>     2200G
>     2400G
>     2700
>     2700X
>     2950X
>     3600X
>     3800X
>     3900X
>     3950X
>     3970X
>     EPYC 7302
>     EPYC 7742
> 
> Many thanks to everyone who helped to test this series.
> 
> ---
> v4: Normalize current calculations do show 1A / LSB for core current and
>     0.25A / LSB for SoC current. The reported current values are board
>     specific and need to be scaled using the configuration file.
>     Clarified that the maximum temperature of 70 degrees C (which is no
>     longer displayed) was associated to Tctl and not to Tdie.
>     Added debugfs support.
> 
> v3: Added more Tested-by: tags
>     Added detection for 3970X, and report Tccd1 for this CPU.
> 
> v2: Added Tested-by: tags as received.
>     Don't display voltage and current information for Threadripper and EPYC.
>     Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C
>     for Tdie on model 17h/18h CPUs.

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists