| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 22 Jan 2020 13:58:50 +0300
From: Alexander Lobakin <alobakin@...nk.ru>
To: Paul Burton <paulburton@...nel.org>
Cc: Ralf Baechle <ralf@...ux-mips.org>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
Will Deacon <will@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Alexander Lobakin <alobakin@...nk.ru>,
Michal Simek <michal.simek@...inx.com>,
Allison Randal <allison@...utok.net>,
Thomas Gleixner <tglx@...utronix.de>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH mips-next 3/5] MIPS: make CPU_HAS_LOAD_STORE_LR opt-out
CPU_HAS_LOAD_STORE_LR was introduced in 932afdeec18b ("MIPS: Add Kconfig
variable for CPUs with unaligned load/store instructions") to make code
in kernel/unaligned.c and lib/mem{cpy,set}.S more intuitive and give a
possibility to easily add new CPUs without these instruction sets in
future.
Hovewer, this variant is not optimal for mainly two reasons:
* For now, we have 20+ CPUs with such instructions and only two (MIPS R6)
without. It will obviously be more effective and straightforward to
have an option for these two rather than for the rest.
* You can easily miss the fact that you need to select this option when
adding a new CPU, while all processors lacking these sets are
well-known, so the probability of missing something is way much lower.
We can address both points by turning CPU_HAS_LOAD_STORE_LR into opt-out
CPU_NO_LOAD_STORE_LR. This also makes MIPS root Kconfig more clear and
understandable.
Signed-off-by: Alexander Lobakin <alobakin@...nk.ru>
---
arch/mips/Kconfig | 34 +++++++---------------------------
arch/mips/kernel/unaligned.c | 36 ++++++++++++++++++------------------
arch/mips/lib/memcpy.S | 14 +++++++-------
arch/mips/lib/memset.S | 16 ++++++++--------
4 files changed, 40 insertions(+), 60 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c5498146bd3b..8ff846ef2345 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1218,8 +1218,7 @@ config NO_IOPORT_MAP
def_bool n
config GENERIC_CSUM
- bool
- default y if !CPU_HAS_LOAD_STORE_LR
+ def_bool CPU_NO_LOAD_STORE_LR
config GENERIC_ISA_DMA
bool
@@ -1441,7 +1440,6 @@ config CPU_LOONGSON64
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
select CPU_SUPPORTS_MSA
- select CPU_HAS_LOAD_STORE_LR
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select MIPS_ASID_BITS_VARIABLE
@@ -1537,7 +1535,6 @@ config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
help
@@ -1555,7 +1552,6 @@ config CPU_MIPS32_R2
bool "MIPS32 Release 2"
depends on SYS_HAS_CPU_MIPS32_R2
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
@@ -1571,6 +1567,7 @@ config CPU_MIPS32_R6
bool "MIPS32 Release 6"
depends on SYS_HAS_CPU_MIPS32_R6
select CPU_HAS_PREFETCH
+ select CPU_NO_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
@@ -1586,7 +1583,6 @@ config CPU_MIPS64_R1
bool "MIPS64 Release 1"
depends on SYS_HAS_CPU_MIPS64_R1
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1606,7 +1602,6 @@ config CPU_MIPS64_R2
bool "MIPS64 Release 2"
depends on SYS_HAS_CPU_MIPS64_R2
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1624,6 +1619,7 @@ config CPU_MIPS64_R6
bool "MIPS64 Release 6"
depends on SYS_HAS_CPU_MIPS64_R6
select CPU_HAS_PREFETCH
+ select CPU_NO_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1641,7 +1637,6 @@ config CPU_R3000
bool "R3000"
depends on SYS_HAS_CPU_R3000
select CPU_HAS_WB
- select CPU_HAS_LOAD_STORE_LR
select CPU_R3K_TLB
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1657,7 +1652,6 @@ config CPU_TX39XX
bool "R39XX"
depends on SYS_HAS_CPU_TX39XX
select CPU_SUPPORTS_32BIT_KERNEL
- select CPU_HAS_LOAD_STORE_LR
select CPU_R3K_TLB
config CPU_VR41XX
@@ -1665,7 +1659,6 @@ config CPU_VR41XX
depends on SYS_HAS_CPU_VR41XX
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
- select CPU_HAS_LOAD_STORE_LR
help
The options selects support for the NEC VR4100 series of processors.
Only choose this option if you have one of these processors as a
@@ -1678,7 +1671,6 @@ config CPU_R4X00
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
- select CPU_HAS_LOAD_STORE_LR
help
MIPS Technologies R4000-series processors other than 4300, including
the R4000, R4400, R4600, and 4700.
@@ -1687,7 +1679,6 @@ config CPU_TX49XX
bool "R49XX"
depends on SYS_HAS_CPU_TX49XX
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
@@ -1698,7 +1689,6 @@ config CPU_R5000
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
- select CPU_HAS_LOAD_STORE_LR
help
MIPS Technologies R5000-series processors other than the Nevada.
@@ -1708,7 +1698,6 @@ config CPU_R5500
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
- select CPU_HAS_LOAD_STORE_LR
help
NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
instruction set.
@@ -1719,7 +1708,6 @@ config CPU_NEVADA
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HUGEPAGES
- select CPU_HAS_LOAD_STORE_LR
help
QED / PMC-Sierra RM52xx-series ("Nevada") processors.
@@ -1727,7 +1715,6 @@ config CPU_R10000
bool "R10000"
depends on SYS_HAS_CPU_R10000
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1739,7 +1726,6 @@ config CPU_RM7000
bool "RM7000"
depends on SYS_HAS_CPU_RM7000
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1748,7 +1734,6 @@ config CPU_RM7000
config CPU_SB1
bool "SB1"
depends on SYS_HAS_CPU_SB1
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1759,7 +1744,6 @@ config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_64BIT_KERNEL
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
@@ -1789,7 +1773,6 @@ config CPU_BMIPS
select WEAK_ORDERING
select CPU_SUPPORTS_HIGHMEM
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_CPUFREQ
select MIPS_EXTERNAL_TIMER
help
@@ -1798,7 +1781,6 @@ config CPU_BMIPS
config CPU_XLR
bool "Netlogic XLR SoC"
depends on SYS_HAS_CPU_XLR
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
@@ -1817,7 +1799,6 @@ config CPU_XLP
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_MIPSR2
select CPU_SUPPORTS_HUGEPAGES
select MIPS_ASID_BITS_VARIABLE
@@ -1923,14 +1904,12 @@ config CPU_LOONGSON2EF
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
select ARCH_HAS_PHYS_TO_DMA
- select CPU_HAS_LOAD_STORE_LR
config CPU_LOONGSON32
bool
select CPU_MIPS32
select CPU_MIPSR2
select CPU_HAS_PREFETCH
- select CPU_HAS_LOAD_STORE_LR
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_CPUFREQ
@@ -2573,12 +2552,13 @@ config XKS01
config CPU_HAS_RIXI
bool
-config CPU_HAS_LOAD_STORE_LR
+config CPU_NO_LOAD_STORE_LR
bool
help
- CPU has support for unaligned load and store instructions:
+ CPU lacks support for unaligned load and store instructions:
LWL, LWR, SWL, SWR (Load/store word left/right).
- LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit systems).
+ LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit
+ systems).
#
# Vectored interrupt mode is an R2 feature
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 92bd2b0f0548..ca6fc4762d97 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -131,7 +131,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -152,7 +152,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl instruction */
#define _LoadW(addr, value, res, type) \
do { \
@@ -187,7 +187,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _LoadHWU(addr, value, res, type) \
do { \
@@ -213,7 +213,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -256,7 +256,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
do { \
@@ -340,7 +340,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreHW(addr, value, res, type) \
@@ -366,7 +366,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -407,7 +407,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -483,7 +483,7 @@ do { \
: "memory"); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#else /* __BIG_ENDIAN */
@@ -509,7 +509,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -530,7 +530,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl instruction */
#define _LoadW(addr, value, res, type) \
do { \
@@ -565,7 +565,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _LoadHWU(addr, value, res, type) \
@@ -592,7 +592,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _LoadWU(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -635,7 +635,7 @@ do { \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without lwl and ldl instructions */
#define _LoadWU(addr, value, res, type) \
do { \
@@ -718,7 +718,7 @@ do { \
: "=&r" (value), "=r" (res) \
: "r" (addr), "i" (-EFAULT)); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define _StoreHW(addr, value, res, type) \
do { \
@@ -743,7 +743,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT));\
} while(0)
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
#define _StoreW(addr, value, res, type) \
do { \
__asm__ __volatile__ ( \
@@ -784,7 +784,7 @@ do { \
: "r" (value), "r" (addr), "i" (-EFAULT)); \
} while(0)
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
/* For CPUs without swl and sdl instructions */
#define _StoreW(addr, value, res, type) \
do { \
@@ -861,7 +861,7 @@ do { \
: "memory"); \
} while(0)
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
#endif
#define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel)
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index cdd19d8561e8..f7994d936505 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -301,14 +301,14 @@
and t0, src, ADDRMASK
PREFS( 0, 2*32(src) )
PREFD( 1, 2*32(dst) )
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
bnez t1, .Ldst_unaligned\@
nop
bnez t0, .Lsrc_unaligned_dst_aligned\@
-#else
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
or t0, t0, t1
bnez t0, .Lcopy_unaligned_bytes\@
-#endif
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
/*
* use delay slot for fall-through
* src and dst are aligned; need to compute rem
@@ -389,7 +389,7 @@
bne rem, len, 1b
.set noreorder
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
/*
* src and dst are aligned, need to copy rem bytes (rem < NBYTES)
* A loop would do only a byte at a time with possible branch
@@ -491,7 +491,7 @@
bne len, rem, 1b
.set noreorder
-#endif /* CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* !CONFIG_CPU_NO_LOAD_STORE_LR */
.Lcopy_bytes_checklen\@:
beqz len, .Ldone\@
nop
@@ -520,7 +520,7 @@
jr ra
nop
-#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lcopy_unaligned_bytes\@:
1:
COPY_BYTE(0)
@@ -534,7 +534,7 @@
ADD src, src, 8
b 1b
ADD dst, dst, 8
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
.if __memcpy == 1
END(memcpy)
.set __memcpy, 0
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index 418611ef13cf..d5449e8a3dfc 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -115,7 +115,7 @@
#endif
.set reorder
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
R10KCBARRIER(0(ra))
#ifdef __MIPSEB__
EX(LONG_S_L, a1, (a0), .Lfirst_fixup\@) /* make word/dword aligned */
@@ -125,7 +125,7 @@
PTR_SUBU a0, t0 /* long align ptr */
PTR_ADDU a2, t0 /* correct size */
-#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
#define STORE_BYTE(N) \
EX(sb, a1, N(a0), .Lbyte_fixup\@); \
.set noreorder; \
@@ -150,7 +150,7 @@
ori a0, STORMASK
xori a0, STORMASK
PTR_ADDIU a0, STORSIZE
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
1: ori t1, a2, 0x3f /* # of full blocks */
xori t1, 0x3f
andi t0, a2, 0x40-STORSIZE
@@ -185,7 +185,7 @@
.set noreorder
beqz a2, 1f
-#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifndef CONFIG_CPU_NO_LOAD_STORE_LR
PTR_ADDU a0, a2 /* What's left */
.set reorder
R10KCBARRIER(0(ra))
@@ -194,7 +194,7 @@
#else
EX(LONG_S_L, a1, -1(a0), .Llast_fixup\@)
#endif
-#else
+#else /* CONFIG_CPU_NO_LOAD_STORE_LR */
PTR_SUBU t0, $0, a2
.set reorder
move a2, zero /* No remaining longs */
@@ -211,7 +211,7 @@
EX(sb, a1, 6(a0), .Lbyte_fixup\@)
#endif
0:
-#endif
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
1: move a2, zero
jr ra
@@ -234,7 +234,7 @@
.hidden __memset
.endif
-#ifndef CONFIG_CPU_HAS_LOAD_STORE_LR
+#ifdef CONFIG_CPU_NO_LOAD_STORE_LR
.Lbyte_fixup\@:
/*
* unset_bytes = (#bytes - (#unaligned bytes)) - (-#unaligned bytes remaining + 1) + 1
@@ -243,7 +243,7 @@
PTR_SUBU a2, t0
PTR_ADDIU a2, 1
jr ra
-#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
+#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */
.Lfirst_fixup\@:
/* unset_bytes already in a2 */
--
2.25.0
Powered by blists - more mailing lists