lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200123230325.3037-11-digetx@gmail.com>
Date:   Fri, 24 Jan 2020 02:03:21 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Laxman Dewangan <ldewangan@...dia.com>,
        Vinod Koul <vkoul@...nel.org>,
        Dan Williams <dan.j.williams@...el.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Michał Mirosław <mirq-linux@...e.qmqm.pl>
Cc:     dmaengine@...r.kernel.org, linux-tegra@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH v5 10/14] dmaengine: tegra-apb: Keep clock enabled only during of DMA transfer

It's a bit impractical to enable hardware's clock at the time of DMA
channel's allocation because most of DMA client drivers allocate DMA
channel at the time of the driver's probing and thus DMA clock is kept
always-enabled in practice, defeating the whole purpose of runtime PM.

Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
 drivers/dma/tegra20-apb-dma.c | 47 ++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 15 deletions(-)

diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 22b88ccff05d..0ee28d8e3c96 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -436,6 +436,8 @@ static void tegra_dma_stop(struct tegra_dma_channel *tdc)
 		tdc_write(tdc, TEGRA_APBDMA_CHAN_STATUS, status);
 	}
 	tdc->busy = false;
+
+	pm_runtime_put(tdc->tdma->dev);
 }
 
 static void tegra_dma_start(struct tegra_dma_channel *tdc,
@@ -500,18 +502,25 @@ static void tegra_dma_configure_for_next(struct tegra_dma_channel *tdc,
 	tegra_dma_resume(tdc);
 }
 
-static void tdc_start_head_req(struct tegra_dma_channel *tdc)
+static bool tdc_start_head_req(struct tegra_dma_channel *tdc)
 {
 	struct tegra_dma_sg_req *sg_req;
+	int err;
 
 	if (list_empty(&tdc->pending_sg_req))
-		return;
+		return false;
+
+	err = pm_runtime_get_sync(tdc->tdma->dev);
+	if (WARN_ON_ONCE(err < 0))
+		return false;
 
 	sg_req = list_first_entry(&tdc->pending_sg_req, typeof(*sg_req), node);
 	tegra_dma_start(tdc, sg_req);
 	sg_req->configured = true;
 	sg_req->words_xferred = 0;
 	tdc->busy = true;
+
+	return true;
 }
 
 static void tdc_configure_next_head_desc(struct tegra_dma_channel *tdc)
@@ -615,6 +624,8 @@ static void handle_once_dma_done(struct tegra_dma_channel *tdc,
 	}
 	list_add_tail(&sgreq->node, &tdc->free_sg_req);
 
+	pm_runtime_put(tdc->tdma->dev);
+
 	/* Do not start DMA if it is going to be terminate */
 	if (to_terminate || list_empty(&tdc->pending_sg_req))
 		return;
@@ -730,9 +741,7 @@ static void tegra_dma_issue_pending(struct dma_chan *dc)
 		dev_err(tdc2dev(tdc), "No DMA request\n");
 		goto end;
 	}
-	if (!tdc->busy) {
-		tdc_start_head_req(tdc);
-
+	if (!tdc->busy && tdc_start_head_req(tdc)) {
 		/* Continuous single mode: Configure next req */
 		if (tdc->cyclic) {
 			/*
@@ -775,6 +784,13 @@ static int tegra_dma_terminate_all(struct dma_chan *dc)
 	else
 		wcount = status;
 
+	/*
+	 * tegra_dma_stop() will drop the RPM's usage refcount, but
+	 * tegra_dma_resume() touches hardware and thus we should keep
+	 * the DMA clock active while it's needed.
+	 */
+	pm_runtime_get(tdc->tdma->dev);
+
 	was_busy = tdc->busy;
 	tegra_dma_stop(tdc);
 
@@ -786,6 +802,8 @@ static int tegra_dma_terminate_all(struct dma_chan *dc)
 	}
 	tegra_dma_resume(tdc);
 
+	pm_runtime_put(tdc->tdma->dev);
+
 skip_dma_stop:
 	tegra_dma_abort_all(tdc);
 
@@ -1280,22 +1298,15 @@ tegra_dma_prep_dma_cyclic(struct dma_chan *dc, dma_addr_t buf_addr,
 static int tegra_dma_alloc_chan_resources(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
-	struct tegra_dma *tdma = tdc->tdma;
-	int ret;
 
 	dma_cookie_init(&tdc->dma_chan);
 
-	ret = pm_runtime_get_sync(tdma->dev);
-	if (ret < 0)
-		return ret;
-
 	return 0;
 }
 
 static void tegra_dma_free_chan_resources(struct dma_chan *dc)
 {
 	struct tegra_dma_channel *tdc = to_tegra_dma_chan(dc);
-	struct tegra_dma *tdma = tdc->tdma;
 	struct tegra_dma_desc *dma_desc;
 	struct tegra_dma_sg_req *sg_req;
 	struct list_head dma_desc_list;
@@ -1328,7 +1339,6 @@ static void tegra_dma_free_chan_resources(struct dma_chan *dc)
 		list_del(&sg_req->node);
 		kfree(sg_req);
 	}
-	pm_runtime_put(tdma->dev);
 
 	tdc->slave_id = TEGRA_APBDMA_SLAVE_ID_INVALID;
 }
@@ -1428,6 +1438,11 @@ static int tegra_dma_probe(struct platform_device *pdev)
 
 	spin_lock_init(&tdma->global_lock);
 
+	ret = clk_prepare(tdma->dma_clk);
+	if (ret)
+		return ret;
+
+	pm_runtime_irq_safe(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	ret = pm_runtime_get_sync(&pdev->dev);
@@ -1543,6 +1558,7 @@ static int tegra_dma_probe(struct platform_device *pdev)
 
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
+	clk_unprepare(tdma->dma_clk);
 
 	return ret;
 }
@@ -1553,6 +1569,7 @@ static int tegra_dma_remove(struct platform_device *pdev)
 
 	dma_async_device_unregister(&tdma->dma_dev);
 	pm_runtime_disable(&pdev->dev);
+	clk_unprepare(tdma->dma_clk);
 
 	return 0;
 }
@@ -1581,7 +1598,7 @@ static int tegra_dma_runtime_suspend(struct device *dev)
 						  TEGRA_APBDMA_CHAN_WCOUNT);
 	}
 
-	clk_disable_unprepare(tdma->dma_clk);
+	clk_disable(tdma->dma_clk);
 
 	return 0;
 }
@@ -1592,7 +1609,7 @@ static int tegra_dma_runtime_resume(struct device *dev)
 	unsigned int i;
 	int ret;
 
-	ret = clk_prepare_enable(tdma->dma_clk);
+	ret = clk_enable(tdma->dma_clk);
 	if (ret < 0) {
 		dev_err(dev, "clk_enable failed: %d\n", ret);
 		return ret;
-- 
2.24.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ