lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1579867508-81499-3-git-send-email-zhouyanjie@wanyeetech.com>
Date:   Fri, 24 Jan 2020 20:05:03 +0800
From:   周琰杰 (Zhou Yanjie) 
        <zhouyanjie@...yeetech.com>
To:     linux-mips@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        robh+dt@...nel.org, paul.burton@...s.com, paulburton@...nel.org,
        jhogan@...nel.org, tglx@...utronix.de, daniel.lezcano@...aro.org,
        shawnguo@...nel.org, mark.rutland@....com, syq@...ian.org,
        ralf@...ux-mips.org, miquel.raynal@...tlin.com,
        keescook@...omium.org, ebiederm@...ssion.com, krzk@...nel.org,
        geert+renesas@...der.be, paul@...pouillou.net,
        prasannatsmkumar@...il.com, sernia.zhou@...mail.com,
        zhenwenjin@...il.com, mturquette@...libre.com, sboyd@...nel.org,
        chenhc@...ote.com, jiaxun.yang@...goat.com, paul@...die.org.uk,
        hns@...delico.com, mips-creator-ci20-dev@...glegroups.com,
        rick.tyliu@...enic.com
Subject: [PATCH v3 1/6] MIPS: JZ4780: Introduce SMP support.

Forward port smp support from kernel 3.18.3 of CI20_linux
to upstream kernel 5.5.

Tested-by: H. Nikolaus Schaller <hns@...delico.com>
Tested-by: Paul Boddie <paul@...die.org.uk>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>
---

Notes:
    v1-v2:
    1.Remove unnecessary "plat_irq_dispatch(void)" in irq-ingenic.c.
    2.Add a timeout check for "jz4780_boot_secondary()" to avoid a dead loop.
    3.Replace hard code in smp.c with macro.
    
    v2->v3:
    1.Remove unnecessary "extern void (*r4k_blast_dcache)(void)" in smp.c.
    2.Use "for_each_of_cpu_node" instead "for_each_compatible_node" in smp.c.
    3.Use "of_cpu_node_to_id" instead "of_property_read_u32_index" in smp.c.
    4.Move LCR related operations to jz4780-cgu.c.

 arch/mips/include/asm/mach-jz4740/jz4780-smp.h |  91 ++++++++
 arch/mips/jz4740/Kconfig                       |   3 +
 arch/mips/jz4740/Makefile                      |   5 +
 arch/mips/jz4740/prom.c                        |   4 +
 arch/mips/jz4740/smp-entry.S                   |  57 +++++
 arch/mips/jz4740/smp.c                         | 286 +++++++++++++++++++++++++
 arch/mips/kernel/idle.c                        |  14 +-
 drivers/clk/ingenic/jz4780-cgu.c               |  58 ++++-
 8 files changed, 512 insertions(+), 6 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-jz4740/jz4780-smp.h
 create mode 100644 arch/mips/jz4740/smp-entry.S
 create mode 100644 arch/mips/jz4740/smp.c

diff --git a/arch/mips/include/asm/mach-jz4740/jz4780-smp.h b/arch/mips/include/asm/mach-jz4740/jz4780-smp.h
new file mode 100644
index 00000000..3f592ce
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/jz4780-smp.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Copyright (C) 2013, Paul Burton <paul.burton@...tec.com>
+ *  JZ4780 SMP definitions
+ */
+
+#ifndef __MIPS_ASM_MACH_JZ4740_JZ4780_SMP_H__
+#define __MIPS_ASM_MACH_JZ4740_JZ4780_SMP_H__
+
+#define read_c0_corectrl()		__read_32bit_c0_register($12, 2)
+#define write_c0_corectrl(val)		__write_32bit_c0_register($12, 2, val)
+
+#define read_c0_corestatus()		__read_32bit_c0_register($12, 3)
+#define write_c0_corestatus(val)	__write_32bit_c0_register($12, 3, val)
+
+#define read_c0_reim()			__read_32bit_c0_register($12, 4)
+#define write_c0_reim(val)		__write_32bit_c0_register($12, 4, val)
+
+#define read_c0_mailbox0()		__read_32bit_c0_register($20, 0)
+#define write_c0_mailbox0(val)		__write_32bit_c0_register($20, 0, val)
+
+#define read_c0_mailbox1()		__read_32bit_c0_register($20, 1)
+#define write_c0_mailbox1(val)		__write_32bit_c0_register($20, 1, val)
+
+#define smp_clr_pending(mask) do {		\
+		unsigned int stat;		\
+		stat = read_c0_corestatus();	\
+		stat &= ~((mask) & 0xff);	\
+		write_c0_corestatus(stat);	\
+	} while (0)
+
+/*
+ * Core Control register
+ */
+#define CORECTRL_SLEEP1M_SHIFT	17
+#define CORECTRL_SLEEP1M	(_ULCAST_(0x1) << CORECTRL_SLEEP1M_SHIFT)
+#define CORECTRL_SLEEP0M_SHIFT	16
+#define CORECTRL_SLEEP0M	(_ULCAST_(0x1) << CORECTRL_SLEEP0M_SHIFT)
+#define CORECTRL_RPC1_SHIFT	9
+#define CORECTRL_RPC1		(_ULCAST_(0x1) << CORECTRL_RPC1_SHIFT)
+#define CORECTRL_RPC0_SHIFT	8
+#define CORECTRL_RPC0		(_ULCAST_(0x1) << CORECTRL_RPC0_SHIFT)
+#define CORECTRL_SWRST1_SHIFT	1
+#define CORECTRL_SWRST1		(_ULCAST_(0x1) << CORECTRL_SWRST1_SHIFT)
+#define CORECTRL_SWRST0_SHIFT	0
+#define CORECTRL_SWRST0		(_ULCAST_(0x1) << CORECTRL_SWRST0_SHIFT)
+
+/*
+ * Core Status register
+ */
+#define CORESTATUS_SLEEP1_SHIFT	17
+#define CORESTATUS_SLEEP1	(_ULCAST_(0x1) << CORESTATUS_SLEEP1_SHIFT)
+#define CORESTATUS_SLEEP0_SHIFT	16
+#define CORESTATUS_SLEEP0	(_ULCAST_(0x1) << CORESTATUS_SLEEP0_SHIFT)
+#define CORESTATUS_IRQ1P_SHIFT	9
+#define CORESTATUS_IRQ1P	(_ULCAST_(0x1) << CORESTATUS_IRQ1P_SHIFT)
+#define CORESTATUS_IRQ0P_SHIFT	8
+#define CORESTATUS_IRQ0P	(_ULCAST_(0x1) << CORESTATUS_IRQ8P_SHIFT)
+#define CORESTATUS_MIRQ1P_SHIFT	1
+#define CORESTATUS_MIRQ1P	(_ULCAST_(0x1) << CORESTATUS_MIRQ1P_SHIFT)
+#define CORESTATUS_MIRQ0P_SHIFT	0
+#define CORESTATUS_MIRQ0P	(_ULCAST_(0x1) << CORESTATUS_MIRQ0P_SHIFT)
+
+/*
+ * Reset Entry & IRQ Mask register
+ */
+#define REIM_ENTRY_SHIFT	16
+#define REIM_ENTRY		(_ULCAST_(0xffff) << REIM_ENTRY_SHIFT)
+#define REIM_IRQ1M_SHIFT	9
+#define REIM_IRQ1M		(_ULCAST_(0x1) << REIM_IRQ1M_SHIFT)
+#define REIM_IRQ0M_SHIFT	8
+#define REIM_IRQ0M		(_ULCAST_(0x1) << REIM_IRQ0M_SHIFT)
+#define REIM_MBOXIRQ1M_SHIFT	1
+#define REIM_MBOXIRQ1M		(_ULCAST_(0x1) << REIM_MBOXIRQ1M_SHIFT)
+#define REIM_MBOXIRQ0M_SHIFT	0
+#define REIM_MBOXIRQ0M		(_ULCAST_(0x1) << REIM_MBOXIRQ0M_SHIFT)
+
+#ifdef CONFIG_SMP
+
+extern void jz4780_smp_wait_irqoff(void);
+
+extern void jz4780_smp_init(void);
+extern void jz4780_secondary_cpu_entry(void);
+
+#else /* !CONFIG_SMP */
+
+static inline void jz4780_smp_init(void) { }
+
+#endif /* !CONFIG_SMP */
+
+#endif /* __MIPS_ASM_MACH_JZ4740_JZ4780_SMP_H__ */
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 412d2fa..0239597 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -34,9 +34,12 @@ config MACH_JZ4770
 
 config MACH_JZ4780
 	bool
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select MIPS_CPU_SCACHE
+	select NR_CPUS_DEFAULT_2
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_SMP
 
 config MACH_X1000
 	bool
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 6de14c0..0a0f024 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -12,3 +12,8 @@ CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 # PM support
 
 obj-$(CONFIG_PM) += pm.o
+
+# SMP support
+
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_SMP) += smp-entry.o
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index ff4555c..a79159e 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -8,10 +8,14 @@
 
 #include <asm/bootinfo.h>
 #include <asm/fw/fw.h>
+#include <asm/mach-jz4740/jz4780-smp.h>
 
 void __init prom_init(void)
 {
 	fw_init_cmdline();
+#if defined(CONFIG_MACH_JZ4780) && defined(CONFIG_SMP)
+	jz4780_smp_init();
+#endif
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/jz4740/smp-entry.S b/arch/mips/jz4740/smp-entry.S
new file mode 100644
index 00000000..20049a3
--- /dev/null
+++ b/arch/mips/jz4740/smp-entry.S
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Copyright (C) 2013, Paul Burton <paul.burton@...tec.com>
+ *  JZ4780 SMP entry point
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheops.h>
+#include <asm/mipsregs.h>
+
+#define CACHE_SIZE (32 * 1024)
+#define CACHE_LINESIZE 32
+
+.extern jz4780_cpu_entry_sp
+.extern jz4780_cpu_entry_gp
+
+.section .text.smp-entry
+.balign 0x10000
+.set noreorder
+LEAF(jz4780_secondary_cpu_entry)
+	mtc0	zero, CP0_CAUSE
+
+	li	t0, ST0_CU0
+	mtc0	t0, CP0_STATUS
+
+	/* cache setup */
+	li	t0, KSEG0
+	ori	t1, t0, CACHE_SIZE
+	mtc0	zero, CP0_TAGLO, 0
+1:	cache	Index_Store_Tag_I, 0(t0)
+	cache	Index_Store_Tag_D, 0(t0)
+	bne	t0, t1, 1b
+	 addiu	t0, t0, CACHE_LINESIZE
+
+	/* kseg0 cache attribute */
+	mfc0	t0, CP0_CONFIG, 0
+	ori	t0, t0, CONF_CM_CACHABLE_NONCOHERENT
+	mtc0	t0, CP0_CONFIG, 0
+
+	/* pagemask */
+	mtc0	zero, CP0_PAGEMASK, 0
+
+	/* retrieve sp */
+	la	t0, jz4780_cpu_entry_sp
+	lw	sp, 0(t0)
+
+	/* retrieve gp */
+	la	t0, jz4780_cpu_entry_gp
+	lw	gp, 0(t0)
+
+	/* jump to the kernel in kseg0 */
+	la	t0, smp_bootstrap
+	jr	t0
+	 nop
+	END(jz4780_secondary_cpu_entry)
diff --git a/arch/mips/jz4740/smp.c b/arch/mips/jz4740/smp.c
new file mode 100644
index 00000000..19b75c2
--- /dev/null
+++ b/arch/mips/jz4740/smp.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2013, Paul Burton <paul.burton@...tec.com>
+ *  JZ4780 SMP
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/smp.h>
+#include <linux/tick.h>
+#include <asm/mach-jz4740/jz4780-smp.h>
+#include <asm/r4kcache.h>
+#include <asm/smp-ops.h>
+
+static struct clk *cpu_clock_gates[CONFIG_NR_CPUS] = { NULL };
+
+u32 jz4780_cpu_entry_sp;
+u32 jz4780_cpu_entry_gp;
+
+static struct cpumask cpu_running;
+
+static DEFINE_SPINLOCK(smp_lock);
+
+/*
+ * The Ingenic jz4780 SMP variant has to write back dirty cache lines before
+ * executing wait. The CPU & cache clock will be gated until we return from
+ * the wait, and if another core attempts to access data from our data cache
+ * during this time then it will lock up.
+ */
+void jz4780_smp_wait_irqoff(void)
+{
+	unsigned long pending = read_c0_cause() & read_c0_status() & CAUSEF_IP;
+
+	/*
+	 * Going to idle has a significant overhead due to the cache flush so
+	 * try to avoid it if we'll immediately be woken again due to an IRQ.
+	 */
+	if (!need_resched() && !pending) {
+		r4k_blast_dcache();
+
+		__asm__(
+		"	.set push	\n"
+		"	.set mips3	\n"
+		"	sync		\n"
+		"	wait		\n"
+		"	.set pop	\n");
+	}
+
+	local_irq_enable();
+}
+
+static irqreturn_t mbox_handler(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+	u32 action, status;
+
+	spin_lock(&smp_lock);
+
+	switch (cpu) {
+	case 0:
+		action = read_c0_mailbox0();
+		write_c0_mailbox0(0);
+		break;
+	case 1:
+		action = read_c0_mailbox1();
+		write_c0_mailbox1(0);
+		break;
+	default:
+		panic("unhandled cpu %d!", cpu);
+	}
+
+	/* clear pending mailbox interrupt */
+	status = read_c0_corestatus();
+	status &= ~(CORESTATUS_MIRQ0P << cpu);
+	write_c0_corestatus(status);
+
+	spin_unlock(&smp_lock);
+
+	if (action & SMP_RESCHEDULE_YOURSELF)
+		scheduler_ipi();
+	if (action & SMP_CALL_FUNCTION)
+		generic_smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mbox_action = {
+	.handler = mbox_handler,
+	.name = "core mailbox",
+	.flags = IRQF_PERCPU | IRQF_NO_THREAD,
+};
+
+static void jz4780_smp_setup(void)
+{
+	u32 addr, reim;
+	int cpu;
+
+	reim = read_c0_reim();
+
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		__cpu_number_map[cpu] = cpu;
+		__cpu_logical_map[cpu] = cpu;
+		set_cpu_possible(cpu, true);
+	}
+
+	/* mask mailbox interrupts for this core */
+	reim &= ~REIM_MBOXIRQ0M;
+	write_c0_reim(reim);
+
+	/* clear mailboxes & pending mailbox IRQs */
+	write_c0_mailbox0(0);
+	write_c0_mailbox1(0);
+	write_c0_corestatus(0);
+
+	/* set reset entry point */
+	addr = KSEG1ADDR((u32)&jz4780_secondary_cpu_entry);
+	WARN_ON(addr & ~REIM_ENTRY);
+	reim &= ~REIM_ENTRY;
+	reim |= addr & REIM_ENTRY;
+
+	/* unmask mailbox interrupts for this core */
+	reim |= REIM_MBOXIRQ0M;
+	write_c0_reim(reim);
+	set_c0_status(STATUSF_IP3);
+	irq_enable_hazard();
+
+	cpumask_set_cpu(cpu, &cpu_running);
+}
+
+static void jz4780_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *cpu_node;
+	unsigned cpu, ctrl;
+	int err;
+
+	/* setup the mailbox IRQ */
+	setup_irq(MIPS_CPU_IRQ_BASE + 3, &mbox_action);
+
+	init_cpu_present(cpu_possible_mask);
+
+	ctrl = read_c0_corectrl();
+
+	for (cpu = 0; cpu < max_cpus; cpu++) {
+		/* use reset entry point from REIM register */
+		ctrl |= CORECTRL_RPC0 << cpu;
+	}
+
+	for_each_of_cpu_node(cpu_node) {
+		cpu = of_cpu_node_to_id(cpu_node);
+		if (cpu < 0) {
+			pr_err("Failed to read index of %s\n",
+			       cpu_node->full_name);
+			continue;
+		}
+
+		cpu_clock_gates[cpu] = of_clk_get(cpu_node, 0);
+		if (IS_ERR(cpu_clock_gates[cpu])) {
+			cpu_clock_gates[cpu] = NULL;
+			continue;
+		}
+
+		err = clk_prepare(cpu_clock_gates[cpu]);
+		if (err)
+			pr_err("Failed to prepare CPU clock gate\n");
+	}
+
+	write_c0_corectrl(ctrl);
+}
+
+static int jz4780_boot_secondary(int cpu, struct task_struct *idle)
+{
+	unsigned long flags;
+	u32 ctrl;
+
+	spin_lock_irqsave(&smp_lock, flags);
+
+	/* ensure the core is in reset */
+	ctrl = read_c0_corectrl();
+	ctrl |= CORECTRL_SWRST0 << cpu;
+	write_c0_corectrl(ctrl);
+
+	/* ungate core clock */
+	if (cpu_clock_gates[cpu])
+		clk_enable(cpu_clock_gates[cpu]);
+
+	/* set entry sp/gp register values */
+	jz4780_cpu_entry_sp = __KSTK_TOS(idle);
+	jz4780_cpu_entry_gp = (u32)task_thread_info(idle);
+	smp_wmb();
+
+	/* take the core out of reset */
+	ctrl &= ~(CORECTRL_SWRST0 << cpu);
+	write_c0_corectrl(ctrl);
+
+	cpumask_set_cpu(cpu, &cpu_running);
+
+	spin_unlock_irqrestore(&smp_lock, flags);
+
+	return 0;
+}
+
+static void jz4780_init_secondary(void)
+{
+}
+
+static void jz4780_smp_finish(void)
+{
+	u32 reim;
+
+	spin_lock(&smp_lock);
+
+	/* unmask mailbox interrupts for this core */
+	reim = read_c0_reim();
+	reim |= REIM_MBOXIRQ0M << smp_processor_id();
+	write_c0_reim(reim);
+
+	spin_unlock(&smp_lock);
+
+	/* unmask interrupts for this core */
+	change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP2 |
+			 STATUSF_IP1 | STATUSF_IP0);
+	irq_enable_hazard();
+
+	/* force broadcast timer */
+	tick_broadcast_force();
+}
+
+static void jz4780_send_ipi_single_locked(int cpu, unsigned int action)
+{
+	u32 mbox;
+
+	switch (cpu) {
+	case 0:
+		mbox = read_c0_mailbox0();
+		write_c0_mailbox0(mbox | action);
+		break;
+	case 1:
+		mbox = read_c0_mailbox1();
+		write_c0_mailbox1(mbox | action);
+		break;
+	default:
+		panic("unhandled cpu %d!", cpu);
+	}
+}
+
+static void jz4780_send_ipi_single(int cpu, unsigned int action)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&smp_lock, flags);
+	jz4780_send_ipi_single_locked(cpu, action);
+	spin_unlock_irqrestore(&smp_lock, flags);
+}
+
+static void jz4780_send_ipi_mask(const struct cpumask *mask,
+				 unsigned int action)
+{
+	unsigned long flags;
+	int cpu;
+
+	spin_lock_irqsave(&smp_lock, flags);
+
+	for_each_cpu(cpu, mask)
+		jz4780_send_ipi_single_locked(cpu, action);
+
+	spin_unlock_irqrestore(&smp_lock, flags);
+}
+
+static struct plat_smp_ops jz4780_smp_ops = {
+	.send_ipi_single = jz4780_send_ipi_single,
+	.send_ipi_mask = jz4780_send_ipi_mask,
+	.init_secondary = jz4780_init_secondary,
+	.smp_finish = jz4780_smp_finish,
+	.boot_secondary = jz4780_boot_secondary,
+	.smp_setup = jz4780_smp_setup,
+	.prepare_cpus = jz4780_smp_prepare_cpus,
+};
+
+void jz4780_smp_init(void)
+{
+	register_smp_ops(&jz4780_smp_ops);
+}
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 37f8e78..a406de3 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -19,6 +19,10 @@
 #include <asm/idle.h>
 #include <asm/mipsregs.h>
 
+#ifdef CONFIG_MACH_JZ4780
+# include <asm/mach-jz4740/jz4780-smp.h>
+#endif
+
 /*
  * Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
  * the implementation of the "wait" feature differs between CPU families. This
@@ -172,7 +176,6 @@ void __init check_wait(void)
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
 	case CPU_CAVIUM_OCTEON3:
-	case CPU_XBURST:
 	case CPU_LOONGSON32:
 	case CPU_XLR:
 	case CPU_XLP:
@@ -246,6 +249,15 @@ void __init check_wait(void)
 		   cpu_wait = r4k_wait;
 		 */
 		break;
+	case CPU_XBURST:
+#if defined(CONFIG_MACH_JZ4780) && defined(CONFIG_SMP)
+		if (NR_CPUS > 1)
+			cpu_wait = jz4780_smp_wait_irqoff;
+		else
+			cpu_wait = r4k_wait;
+#else
+		cpu_wait = r4k_wait;
+#endif
 	default:
 		break;
 	}
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ea905ff..f3eb795 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -16,7 +16,7 @@
 
 /* CGU register offsets */
 #define CGU_REG_CLOCKCONTROL	0x00
-#define CGU_REG_PLLCONTROL	0x0c
+#define CGU_REG_LCR			0x04
 #define CGU_REG_APLL		0x10
 #define CGU_REG_MPLL		0x14
 #define CGU_REG_EPLL		0x18
@@ -46,8 +46,8 @@
 #define CGU_REG_CLOCKSTATUS	0xd4
 
 /* bits within the OPCR register */
-#define OPCR_SPENDN0		(1 << 7)
-#define OPCR_SPENDN1		(1 << 6)
+#define OPCR_SPENDN0		BIT(7)
+#define OPCR_SPENDN1		BIT(6)
 
 /* bits within the USBPCR register */
 #define USBPCR_USB_MODE		BIT(31)
@@ -88,6 +88,13 @@
 #define USBVBFIL_IDDIGFIL_MASK	(0xffff << USBVBFIL_IDDIGFIL_SHIFT)
 #define USBVBFIL_USBVBFIL_MASK	(0xffff)
 
+/* bits within the LCR register */
+#define LCR_PD_SCPU			BIT(31)
+#define LCR_SCPUS			BIT(27)
+
+/* bits within the CLKGR1 register */
+#define CLKGR1_CORE1		BIT(15)
+
 static struct ingenic_cgu *cgu;
 
 static u8 jz4780_otg_phy_get_parent(struct clk_hw *hw)
@@ -205,6 +212,47 @@ static const struct clk_ops jz4780_otg_phy_ops = {
 	.set_rate = jz4780_otg_phy_set_rate,
 };
 
+static int jz4780_core1_enable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const unsigned int timeout = 100;
+	unsigned long flags;
+	unsigned int i;
+	u32 lcr, clkgr1;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+
+	lcr = readl(cgu->base + CGU_REG_LCR);
+	lcr &= ~LCR_PD_SCPU;
+	writel(lcr, cgu->base + CGU_REG_LCR);
+
+	clkgr1 = readl(cgu->base + CGU_REG_CLKGR1);
+	clkgr1 &= ~CLKGR1_CORE1;
+	writel(clkgr1, cgu->base + CGU_REG_CLKGR1);
+
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	/* wait for the CPU to be powered up */
+	for (i = 0; i < timeout; i++) {
+		lcr = readl(cgu->base + CGU_REG_LCR);
+		if (!(lcr & LCR_SCPUS))
+			break;
+		mdelay(1);
+	}
+
+	if (i == timeout) {
+		pr_err("%s: Wait for power up core1 timeout\n", __func__);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static const struct clk_ops jz4780_core1_ops = {
+	.enable = jz4780_core1_enable,
+};
+
 static const s8 pll_od_encoding[16] = {
 	0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
 	0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
@@ -699,9 +747,9 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 	},
 
 	[JZ4780_CLK_CORE1] = {
-		"core1", CGU_CLK_GATE,
+		"core1", CGU_CLK_CUSTOM,
 		.parents = { JZ4780_CLK_CPU, -1, -1, -1 },
-		.gate = { CGU_REG_CLKGR1, 15 },
+		.custom = { &jz4780_core1_ops },
 	},
 
 };
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ