[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6d859def-351e-abd7-0d5f-962ad935dff2@st.com>
Date: Fri, 24 Jan 2020 13:55:22 +0100
From: Ludovic BARRE <ludovic.barre@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: <srinivas.kandagatla@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>
Subject: Re: [PATCH 0/9] mmc: mmci: sdmmc: add sdr104 support
hi Ulf
Just a "gentleman ping" on this series
https://lkml.org/lkml/2020/1/10/392
Regards
Ludo
Le 1/10/20 à 2:48 PM, Ludovic Barre a écrit :
> To support the sdr104 mode, sdmmc variant needs:
> -Hardware delay block support for sdmmc variant
> with tuning procedure
> -Voltage switch callbacks
> -sdmmc revision 2.0
>
> Ludovic Barre (9):
> mmc: mmci: sdmmc: replace sg_dma_xxx macros
> mmc: mmci: sdmmc: rename sdmmc_priv struct to sdmmc_idma
> mmc: mmci: add a reference at mmc_host_ops in mmci struct
> mmc: mmci: add private pointer for variant
> dt-bindings: mmc: mmci: add delay block base register for sdmmc
> mmc: mmci: sdmmc: add execute tuning with delay block
> mmc: mmci: add volt_switch callbacks
> mmc: mmci: sdmmc: add voltage switch functions
> mmc: mmci: add sdmmc variant revision 2.0
>
> .../devicetree/bindings/mmc/mmci.txt | 2 +
> drivers/mmc/host/mmci.c | 39 ++++
> drivers/mmc/host/mmci.h | 8 +
> drivers/mmc/host/mmci_stm32_sdmmc.c | 199 +++++++++++++++++-
> 4 files changed, 241 insertions(+), 7 deletions(-)
>
Powered by blists - more mailing lists