[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200127085534.gux7rjtr275al4pb@M43218.corp.atmel.com>
Date: Mon, 27 Jan 2020 09:55:34 +0100
From: Ludovic Desroches <ludovic.desroches@...rochip.com>
To: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
CC: <linux-i2c@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <kamel.bouhara@...tlin.com>,
<wsa@...-dreams.de>, <Nicolas.Ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <robh@...nel.org>,
<peda@...ntia.se>, <linux@...linux.org.uk>
Subject: Re: [PATCH v3 4/6] ARM: at91/dt: sama5d3: add i2c gpio pinctrl
On Wed, Jan 15, 2020 at 01:54:20PM +0200, Codrin Ciubotariu wrote:
> From: Kamel Bouhara <kamel.bouhara@...tlin.com>
>
> Add the i2c gpio pinctrls to support the i2c bus recovery
>
> Signed-off-by: Kamel Bouhara <kamel.bouhara@...tlin.com>
> [codrin.ciubotariu@...rochip.com: removed gpio pull-ups]
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
> ---
>
> Changes in v3:
> - removed gpio pull-ups;
>
> Changes in v2:
> - none;
>
> arch/arm/boot/dts/sama5d3.dtsi | 33 ++++++++++++++++++++++++++++++---
> 1 file changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index f770aace0efd..1cea2137decf 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -159,8 +159,11 @@
> dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
> <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default";
> + pinctrl-names = "default", "gpio";
> pinctrl-0 = <&pinctrl_i2c0>;
> + pinctrl-1 = <&pinctrl_i2c0_gpio>;
> + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
> + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> clocks = <&twi0_clk>;
> @@ -174,8 +177,11 @@
> dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
> <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default";
> + pinctrl-names = "default", "gpio";
> pinctrl-0 = <&pinctrl_i2c1>;
> + pinctrl-1 = <&pinctrl_i2c1_gpio>;
> + sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
> + scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> clocks = <&twi1_clk>;
> @@ -357,8 +363,11 @@
> dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
> <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
> dma-names = "tx", "rx";
> - pinctrl-names = "default";
> + pinctrl-names = "default", "gpio";
> pinctrl-0 = <&pinctrl_i2c2>;
> + pinctrl-1 = <&pinctrl_i2c2_gpio>;
> + sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
> + scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> clocks = <&twi2_clk>;
> @@ -639,6 +648,12 @@
> <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
> AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
> };
> +
> + pinctrl_i2c0_gpio: i2c0-gpio {
> + atmel,pins =
> + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
> + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> + };
> };
>
> i2c1 {
> @@ -647,6 +662,12 @@
> <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
> AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
> };
> +
> + pinctrl_i2c1_gpio: i2c1-gpio {
> + atmel,pins =
> + <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
> + AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> + };
> };
>
> i2c2 {
> @@ -655,6 +676,12 @@
> <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
> AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
> };
> +
> + pinctrl_i2c2_gpio: i2c2-gpio {
> + atmel,pins =
> + <AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
> + AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> + };
> };
>
> isi {
> --
> 2.20.1
>
Powered by blists - more mailing lists