Date:   Tue, 28 Jan 2020 13:13:01 +0200
From:   Alexandru Ardelean <alexandru.ardelean@...log.com>
To:     <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC:     <ekigwana@...il.com>, <jic23@...nel.org>, <lars@...afoo.de>,
        <robh+dt@...nel.org>,
        Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH v3 2/3] dt-bindings: iio: frequency: Add docs for ADF4360 PLL

From: Edward Kigwana <ekigwana@...il.com>

This change adds the device-tree bindings documentation for the ADF4360
family of PLLs.

Signed-off-by: Edward Kigwana <ekigwana@...il.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
 .../bindings/iio/frequency/adi,adf4360.yaml   | 137 ++++++++++++++++++
 1 file changed, 137 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml

diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml
new file mode 100644
index 000000000000..895e2cb2b300
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4360.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2019-2020 Edward Kigwana
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adf4360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADF4360 PLL device driver
+
+maintainers:
+  - Lars-Peter Clausen <lars@...afoo.de>
+  - Edward Kigwana <ekigwana@...il.com>
+
+description: |
+  Bindings for the Analog Devices ADF4360 family of clock generator phase-locked
+  loop (PLL) devices with an integrated voltage-controlled oscillator (VCO).
+  Each of the parts in the family supports a specific frequency range.
+  Datasheets can be found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-0.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-1.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-2.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-3.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-4.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-5.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-6.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-7.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-8.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-9.pdf
+
+properties:
+  compatible:
+    pattern: '^adi,adf4360-[0-9]$'
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: clkin
+
+  '#clock-cells':
+    const: 0
+
+  adi,loop-filter-pfd-frequency-hz:
+    description: |
+      The phase-frequency-detector frequency that the external loop filter was
+      designed for.
+    allOf:
+      - minimum: 25000
+      - maximum: 8000000
+    maxItems: 1
+
+  adi,loop-filter-charger-pump-current-microamp:
+    description: |
+      The charge pump current that the external loop filter was designed for.
+      The provided value is clamped to the closest enumerated value.
+    enum: [ 310, 620, 930, 1250, 1560, 1870, 2180, 2500 ]
+
+  adi,vco-minimum-frequency-hz:
+    description: |
+      Required for ADF4360-7, ADF4360-8 and ADF4360-9. Minimum VCO frequency
+      that can be supported by the tuning range set by the external inductor.
+    maxItems: 1
+
+  adi,vco-maximum-frequency-hz:
+    description: |
+      Required for ADF4360-7, ADF4360-8 and ADF4360-9. Maximum VCO frequency
+      that can be supported by the tuning range set by the external inductor.
+    maxItems: 1
+
+  adi,loop-filter-inverting:
+    description: Indicates that the external loop filter is an inverting filter.
+    type: boolean
+
+  adi,power-up-frequency-hz:
+    description: |
+      PLL tunes to the set frequency on probe or defaults to either the minimum
+      for the part or value set using adi,vco-minimum-frequency-hz.
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      vdd supply is used to enable or disable chip when regulator power down
+      mode is set. Other power down modes are used to mitigate the case of a
+      shared regulator.
+
+  enable-gpios:
+    description: |
+      Chip enable gpio is used to enable or disable chip when chip enable power
+      down mode is set.
+    maxItems: 1
+
+  adi,muxout-gpios:
+    description: |
+      MUX out gpio is used to detect chip and test pll lock state on read when
+      muxout control is set to lock detect.
+    maxItems: 1
+
+  adi,power-out-level-microamp:
+    description: |
+      Chip support setting of output power level. This property is optional.
+      If it is not provided by default 11000 uA will be set.
+    enum: [ 3500, 5000, 7500, 11000 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - adi,loop-filter-charge-pump-current
+  - adi,loop-filter-pfd-frequency-hz
+
+examples:
+  - |
+      spi0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pll@0 {
+                  compatible = "adi,adf4360-7";
+                  reg = <0>;
+                  spi-max-frequency = <2000000>;
+                  clocks = <&ref_clock>;
+                  #clock-cells = <0>;
+                  clock-names = "clkin";
+                  clock-output-names = "adf4360-7";
+
+                  adi,loop-filter-charge-pump-current = <5>;
+                  adi,loop-filter-pfd-frequency-hz = <2500000>;
+                  adi,vco-minimum-frequency-hz = <700000000>;
+                  adi,vco-maximum-frequency-hz = <840000000>;
+          };
+      };
+...
-- 
2.20.1

Powered by blists - more mailing lists