[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <e941cfae-f267-4c0e-b8e2-1dd99fbdb563@lucaceresoli.net>
Date: Wed, 29 Jan 2020 13:22:35 +0100
From: Luca Ceresoli <luca@...aceresoli.net>
To: Jean Delvare <jdelvare@...e.de>
Cc: linux-i2c@...r.kernel.org, linux-doc@...r.kernel.org,
Wolfram Sang <wsa@...-dreams.de>,
Peter Rosin <peda@...ntia.se>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 01/28] docs: i2c: sort index logically
Hi Jean,
On 24/01/20 13:35, Jean Delvare wrote:
> On Thu, 23 Jan 2020 14:50:36 +0100, Luca Ceresoli wrote:
>> The index page currently lists sections in alphabetical file order without
>> caring about their content. Sort sections based on their content logically,
>> according to the following structure:
>>
>> * Intro to I2C/SMBus and their usage in Linux: summary, i2c-protocol,
>> smbus-protocol, instantiating-devices, busses/index, i2c-topology,
>> muxes/i2c-mux-gpio
>> * Implementing drivers: writing-clients, dev-interface,
>> dma-considerations, fault-codes, functionality
>> * Debugging: gpio-fault-injection, i2c-stub
>> * Slave I2C: slave-interface, slave-eeprom-backend
>> * Advanced: ten-bit-addresses
>> * Obsolete info: upgrading-clients, old-module-parameters
>>
>> Signed-off-by: Luca Ceresoli <luca@...aceresoli.net>
>> Reviewed-by: Jean Delvare <jdelvare@...e.de>
>>
>> ---
>>
>> Changes in v2:
>> - split sections in groups (suggested by Jean Delvare)
>> - remove consecutive blank lines (reported by Jean Delvare)
>> ---
>> Documentation/i2c/index.rst | 59 ++++++++++++++++++++++++++++++-------
>> 1 file changed, 48 insertions(+), 11 deletions(-)
>>
>> diff --git a/Documentation/i2c/index.rst b/Documentation/i2c/index.rst
>> index a0fbaf6d0675..f0f3b9c97abb 100644
>> --- a/Documentation/i2c/index.rst
>> +++ b/Documentation/i2c/index.rst
>> @@ -4,30 +4,67 @@
>> I2C/SMBus Subsystem
>> ===================
>>
>> +Introduction
>> +============
>> +
>> +.. toctree::
>> + :maxdepth: 1
>> +
>> + summary
>> + i2c-protocol
>> + smbus-protocol
>> + instantiating-devices
>> + busses/index
>> + i2c-topology
>> + muxes/i2c-mux-gpio
>> +
>> +
>
> You still have a double blank line here, not sure if this is intended?
It's not intended. Thanks for double checking!
I fixed this patch as well as patch 11. v3 on its way.
--
Luca
Powered by blists - more mailing lists