linux-kernel - [PATCH v3 09/28] docs: i2c: i2c-protocol: remove unneeded colons from table

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200129151953.31582-10-luca@lucaceresoli.net>
Date:   Wed, 29 Jan 2020 16:19:34 +0100
From:   Luca Ceresoli <luca@...aceresoli.net>
To:     linux-i2c@...r.kernel.org, linux-doc@...r.kernel.org
Cc:     Luca Ceresoli <luca@...aceresoli.net>,
        Wolfram Sang <wsa@...-dreams.de>,
        Jean Delvare <jdelvare@...e.de>, Peter Rosin <peda@...ntia.se>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v3 09/28] docs: i2c: i2c-protocol: remove unneeded colons from table


These colons are not needed: the columns already nicely separate the
symbols from their description. They are also inconsistently preceded by
whitespace.

Remove the colons completely to simplify and clean up.

Signed-off-by: Luca Ceresoli <luca@...aceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@...e.de>

---

Changes in v2:
 - fix typo in commit message (Jean Delvare)
---
 Documentation/i2c/i2c-protocol.rst | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index c090003f55ed..66adac3a5afd 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst
@@ -8,19 +8,19 @@ Key to symbols
 ==============
 
 =============== =============================================================
-S             : Start condition
-P             : Stop condition
-Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) : Accept and reverse accept bit.
-Addr  (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
+S               Start condition
+P               Stop condition
+Rd/Wr (1 bit)   Read/Write bit. Rd equals 1, Wr equals 0.
+A, NA (1 bit)   Accept and reverse accept bit.
+Addr  (7 bits)  I2C 7 bit address. Note that this can be expanded as usual to
                 get a 10 bit I2C address.
-Comm  (8 bits): Command byte, a data byte which often selects a register on
+Comm  (8 bits)  Command byte, a data byte which often selects a register on
                 the device.
-Data  (8 bits): A plain data byte. Sometimes, I write DataLow, DataHigh
+Data  (8 bits)  A plain data byte. Sometimes, I write DataLow, DataHigh
                 for 16 bit data.
-Count (8 bits): A data byte containing the length of a block operation.
+Count (8 bits)  A data byte containing the length of a block operation.
 
-[..]:           Data sent by I2C device, as opposed to data sent by the
+[..]            Data sent by I2C device, as opposed to data sent by the
                 host adapter.
 =============== =============================================================
 
-- 
2.25.0