[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200129151953.31582-13-luca@lucaceresoli.net>
Date: Wed, 29 Jan 2020 16:19:37 +0100
From: Luca Ceresoli <luca@...aceresoli.net>
To: linux-i2c@...r.kernel.org, linux-doc@...r.kernel.org
Cc: Luca Ceresoli <luca@...aceresoli.net>,
Wolfram Sang <wsa@...-dreams.de>,
Jean Delvare <jdelvare@...e.de>, Peter Rosin <peda@...ntia.se>,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 12/28] docs: i2c: smbus-protocol: properly name start and stop conditions
In I2C there is no such thing as a "start bit" or a "stop bit". Use the
proper naming: "start condition" and "stop condition".
Signed-off-by: Luca Ceresoli <luca@...aceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@...e.de>
---
Documentation/i2c/smbus-protocol.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 1600b09ec0be..8510eeda1dd0 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -35,8 +35,8 @@ Key to symbols
==============
=============== =============================================================
-S (1 bit) : Start bit
-P (1 bit) : Stop bit
+S : Start condition
+P : Stop condition
Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
A, NA (1 bit) : Accept and reverse accept bit.
Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
--
2.25.0
Powered by blists - more mailing lists